• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.640-647
• /
• 1996

It has been found that an white precipitates at the inside surface is a common characteristics of soda-lime-silica glasses which have not undergone special surface treatments during hot weather season. In this study, the white deposits were examed using by solution method, surface analysis etc., and the dependence of weathering on the atmospheric condition was also investigated. As a results, the white precipitates on the glass surface was discorved as carbonates like $Na_2CO_3{\cdot}H_2O,CaCO_3$. Coming to atmosphere-dependence, it was shown that the glass made and stored at sea shore province had 3 times much severe weathering than that at land province.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.578-584
• /
• 2019

The occurrence of white plume in the cooling tower is phenomenon that the steam in the air through the cooling tower fan is condensed again by the cold ambient air to become saturated moist air. Accordingly, this can cause many problems like spoiling landscape around the cooling tower, odor of ambient air, falling accident by frozenness in the winter, and traffic accident, etc. This study was to install the heat exchanger in the inside of the cooling tower in order to prevent the white plume phenomenon in the cooling tower without affecting the performance of cooling tower. In addition, this study was to discharge the part of cooling water into the atmosphere through the recirculation of heat exchanger after creating dry air by heating the saturated moist air to the dew point temperature. At that time, this study was to conduct the experimental study in order to secure the optimal design data to prevent the white plume in the cooling tower because it checked the dry·moist temperature and relative humidity in the inside·outside of cooling tower on the moist air, and evaluated the performance of the heat exchanger.

• Journal of Biosystems Engineering
• /
• v.28 no.3
• /
• pp.253-260
• /
• 2003

In this study, the feasibility of magnetic resonance techniques for nondestructive internal quality evaluation of Korean red ginseng was examined. Relaxation time constants were measured using various grades of red ginsengs. Solid state magnetic resonance imaging technique was applied to image dried red ginsengs which have low moisture contents (about 13%). A 7 tesla magnetic resonance imaging system operating at a proton resonant frequency of 300 ㎒ was used for acquiring MR images of dried Korean red ginseng. The comparison test of cross cut digital images and magnetic resonance images of heaven grade, good grade with cavity inside, and good grade with white part inside red ginseng suggested the feasibility of the internal quality evaluation of Korean red ginsengs using MRI techniques. A good grade red ginseng included abnormal tissues such as cavities or white parts inside was observed by the signal intensity of MR image based on magnetic resonance properties of proton nucleus. Analysis on an one dimensional profile of acquired MR image of Korean red ginseng showed easy discrimination of normal and abnormal tissues. MR techniques suggested ways to detect internal defects of red ginsengs effectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1889-1891
• /
• 2004

The differential white blood cell count plays an important role in the diagnosis of different diseases. It is a tedious task to count these classes of cell manually. An automatic counter using computer vision helps to perform this medical test rapidly and accurately. Most commercial-available automatic white blood cell analysis composed mainly 3 steps including segmentation, feature extraction and classification. In this paper we concentrate on the first step in automatic white-blood-cell analysis by proposing a segmentation scheme that utilizes a benefit of active contour. Specifically, the binary image is obtained by thresolding of the input blood smear image. The initial shape of active is then placed roughly inside the white blood cell and allowed to grow to fit the shape of individual white blood cell. The white blood cell is then separated using the extracted contour. The force that drives the active contour is the combination of gradient vector flow force and balloon force. Our purposed technique can handle very promising to separate the remaining red blood cells.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.214-221
• /
• 2014

The deterioration in wood by the brown-rot fungus (Fomitopsispalustris) and the white-rot fungus (Trametesversicolor) were measured using ultrasonic velocity. Those were used for the decay exposure and 4 wood species of wood as the test specimens, Pinusdensiflora, Larixkaempferi, Pinuskoraiensis and Pinusrigida, were chosen with both the brown- and white-rot culture petridish during 12 weeks. After 12 weeks, the decrease rate of ultrasonic velocity was measured at 10~15%. In both brown- and white-rot exposure experiments, P. rigida showed significant decrease in ultrasonic velocity (20%), L. kaempferi on the other hand did not show decrease in ultrasonic velocity. After the fungal exposure experiment, the inside of specimens was investigated by computer tomography (C/T). After C/T investigation, bending tests were performed.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.183-187
• /
• 2006

This study carried out to analize quality in the evaluation based on the grades such as raw ginseng and red ginseng between Korean (Panax ginseng C. A. Meyer) and American ginseng (Panax quinquefolium L). American ginseng was small in root length, root diameter and root weight and emergence many secondary root from rhizome and main root. Therefore body form was bad compared with Korean ginseng. As for yield of dry, Korean ginseng was 30.4 % and American ginseng was 33.8% but as for yield, Korean ginseng was 80.4% and American ginseng was 72.2%. There were as many Korean ginseng in raw ginseng first grade by about twice compared with American ginseng. However there were many American ginseng in second grade. On the other hand, Korean ginseng producted high Chunsam compared with American ginseng. The cause of decreasing quality was inside cavity and inside white in Korean and American ginseng. Especially, the inside white occurrence about 3 times compared with inside cavity in American ginseng. In the case of distribution of weight size, Korean ginseng was much above 20Ji but American ginseng was much under 20Ji.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.38 no.1
• /
• pp.18-23
• /
• 2019

Bombyx mori silkworm has many silkworm varieties and the structure and properties of silk can be varied depending on the silkworm variety. Therefore, the choice of proper silkworm variety can be an effective way to control and improve the performance of silk materials in biomedical and cosmetic applications. As a preliminary study, in the present study, thirty nine Bombyx mori silkworm cocoons were prepared and their molecular conformation and crystallinity were examined. Molecular conformation and the crystallinity of silkworm cocoons were different depending on the silkworm variety. Interestingly, the crystallinity index of outside of cocoon was different from that of inside of cocoon and the difference between the crystallinities of outside and inside of cocoon was varied depending on the silkworm variety. In this study, the silkworm variety cocoons were classified into three groups (Group 1, Group 2, and Group 3) based on the difference of crystallinities between outside and inside.

• Journal of Ginseng Research
• /
• v.28 no.3
• /
• pp.136-142
• /
• 2004

During our investigations on the relationship between the browning reaction of ginseng root and two compounds (arginyl-fructosyl-glucose and arginyl-fructose) in the model system of steaming and heat-drying processes for the preparation of red ginseng, the preheating treatment of main roots of raw ginseng at 60∼70$^{\circ}C$ prior to the steaming and heat-drying processes was found to bring about the gelatinization of starch granules. The enzymatic hydrolysis of gelatinized starch to maltose, a marked formation of maltose, and the increase of both free arginine and total amino acids, resulting the acceleration of the Maillard type-browning reaction of ginseng root during the steaming and heat-drying processes, and the rise of brown color intensity of red ginseng. These results show that the preheating treatment may be effective for the decrease of inside white of red ginseng.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.178-183
• /
• 2014

BACKGROUND: The white stain symptom of grape clusters and canes by dust-like particles occurred in many vineyards recently. This study was conducted to investigate the ecological characteristics of white stain symptom in grapevines and vineyards. METHODS AND RESULTS: Optimal climate condition for white stain symptom was $25^{\circ}C{\sim}30^{\circ}C$ with 60% of humidity. Moreover, closed condition with same humidity showed higher incidence rate of white stain symptom than ventilation condition. Grape varieties with black berry skin such as Campbell-Early and Kyoho were more sensitive to white stain symptom compare to varieties with green and red berry skin. Although the pathogens were not detected until March, they increased from April, and increased sharply from mid of July. The pathogens may overwinter in the infected stems and/or on the bark as a mycelium. According to the increase of sugar content of grape from August to September, the mycelium which was parasitic on the bark grew to move to the fruits through the stems, and finally reached the fruit stalk to detach berries from the clusters. CONCLUSION: Well ventilation is recommended inside the vineyard since mid-July with roll up an insect net. In addition, infected stems and fruits should be removed out from grapevines infected with pathogens in the vineyards.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.10-14
• /
• 2019

In this study, we synthesized two $Y_3Al_5O_{12}:Ce^{3+}$ phosphors ($7{\mu}m$-sized and $2{\mu}m$-sized YAG) with different sizes by controlling particles sizes of starting materials of the phosphors for white LED. In the smaller one ($2{\mu}m$-sized YAG), its photoluminescence intensity in the reflective mode was 63 % that of the bigger one ($7{\mu}m$-sized YAG); the quantum efficiencies were 93 % and 70 % for the smaller and the bigger ones. Two kinds of white LED packages with the same color coordinates were fabricated with a blue package (chip size $53{\times}30$) and two phosphors. The luminous flux of the white LED package with the smaller YAG phosphor was 92 % of that with the bigger one, indicating that the quantum efficiency of phosphor dispersed inside LED package was higher than that of the pure powder. It was consistently confirmed by the optical simulation (LightTools 6.3). It is notable according to the optical simulation that the white LED with the smaller phosphor showed 24 % higher luminous efficiency. If the smaller one had the same quantum efficiency as the bigger one (~93 %). Therefore, it can be suggested that the higher luminous efficiency of white LED can be possible by reducing the particle size of the phosphor along with maintaining its similar quantum efficiency.