• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.521-524
• /
• 2000

The switched reluctance motor(SRM) drive system provides a good adjustable speed characteristics. However higher torque ripple are one of the few disadvantages of the SRM drives. The SRM would have to operated with an MMF waveform specified for switching angle and phase voltage. This paper proposes control modelling method using ANN(Artificial Neural Network) and GA(Genetic Algorithm) that are used to control switch-on angles and input voltage.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.185-191
• /
• 1993

A flexible nanipulator can move in the high speed even with the small driving torque. The dynamic equations of flexible manipulator whichinclude 2 vibrationalmodes are derived using the clamped-free boundarycondition. Simulation results of the 6th order modelare well matched with experimental results. The hub angle of the flexible manipulator can be controlled without vibration of beam by the feedback of both hub angle and strain. The overshoot of the hub angle in the step resonse is reduced without sacrificing the rise time using the cycloidal function instead of the step function as the reference input.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.804-807
• /
• 1996

In this paper, a new model of TDF(two degree of freedom) spin-stabilized platform has been suggested. The platform driving signal modulated in the spinning frequency is described in demodulated form keeping its precession angular velocity. When a strong spinning torque exists, the cross-axis spring constant cannot be neglected in modelling of the platform precession dynamics. A linearized dynamic model of spin-stabilized platform pointing loop is derived and validated through the comparison between simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.64-67
• /
• 1998

This paper proposes the hybrid PWM scheme that can obtain less harmonic characteristics in GTO inverters. By employing the variable of the dc-link voltage Vdc, the hybrid PWM pattern can ideally compensate the dc input fluctuation together with selected harmonics elimination. The transient behavior, which the magnetic flux and torque are altered and the large current flows instantly, may be produced when the mode change. To reduce such an undesirable transient behavior, it is also presented the technique for the gear changing of inverter operated with the hybrid PWM. The results are verified by simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.177-182
• /
• 1989

In this paper a new adaptive control algorithm is derived, with the unknown manipulator and payload parameters being estimated online. In practice, we may simplify the algorithm by not explicity estimating all unknown parameters. Further, the controller must be robust to residual time-varying disturbance, such as striction or torque ripple. Also, the reference model is a simple douple integrator and the acceleration input for robot manipulator consists of a proportion and derivative controller for trajectory tracking purposes. The validity of this control is confirmed in simulation where two-link robot manipulator shows the robust performances in spite of the existing nonlinear interaction and unknown parametrictings

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.427-431
• /
• 1996

A modeling of the dynamics of two cooperating robot manipulators doing assembly job such as peg-in-hole while coordinating the payload along the desired path is proposed. The system is uncertain due to the unknown mass and moment of inertia of the manipulators and the payload. To control the system, a robust control algorithm is proposed. The control algorithm includes fuzzylogic. By the fuzzy logic, the magnitude of the input torque of the manipulators is controlled not to go over the hardware saturation with keeping path tracking errors bounded.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.518-521
• /
• 1995

In this paper, a learning control problem is formulated for cooperating multiple-robot manipulators with uncertain system parameters. The commonly held object is also assumed to be unknown and the multiple-robots themselfs experience uncertain operating conditions such as link parameters, viscous friction parameters, suctions, actuator bias, and etc. Under these conditions, the learning controllers designed for learning of uncertain parameters and robot control inputs for multiple-robot systems are shown to drive the multiple-robot manipulators to follow the desired Cartesian trajectory with the desired internal forces to the unknown object.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.800-805
• /
• 2005

In this study, control schemes are proposed for a propulsion system of TTX(Tilting Train eXpress). In developed traction converter, unity power factor control, compensation method of dc link voltage have been applied. Output current of converter contains harmonic ripple at twice input ac line frequency, which causes a ripple in the dc link voltage so that beatless control is developed in inverter system to reduce the pulsating torque current. This system is verified by the system modelling and prototype test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.18-23
• /
• 1990

In this paper, the dynamic modeling and a tip-position controller of a single-link flexible manipulator are developed. To design the controller of a flexible manipulator, at first, it is required to obtain the accurate dynamic model of manipulator describing both rigid motion and flexible vibration. For this purpose, FEM(Finite Element Method) and Lagrange approach are utilized to obtain the dynamic model. After obtaining the dynamic model of a single-link manipulator, a controller which computes the input torque to perform the desired trajectory is developed using neural network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.392-394
• /
• 1999

In this paper, the vector of induction motor using as sensorless is described. Controlling through the estimation of input by slip, the speed controller wit control loops of torque control constant speed operation by the feedback of slip is composed.