• 센서학회지
• /
• 제21권3호
• /
• pp.235-239
• /
• 2012

This paper presents frequency response compensation technique, and a self-oscillation circuit for capacitive microresonator with the compensation technique using programmable capacitor array, to compensate for the frequency response distorted by parasitic capacitances, and to obtain stable oscillation condition. The parasitic capacitances between the actuation input port and capacitive output port distort the frequency response of the microresonator. The distorted non-ideal frequency response can be compensated using two programmable capacitor arrays, which are connected between anti-phased actuation input port and capacitive output port. The simulation model includes the whole microresonator system, which consists of mechanical structure, transimpedance amplifier with automatic gain control, actuation driver and compensation circuit. The compensation operation and oscillation output of the system is verified with the simulation results.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.836-846
• /
• 1990

This paper presents a Static Var Compensator (SVC) system compensating the reactive power for power system, which consists of a voltage type Pulse Width Modulation (PWM) converter and a reactance linking the converter to the source. The system drives the four quadrant modes. The system determines the magnitude of the input voltage, and then compares it with the magnitude of the source voltage by regulating the phase of the SVC about the source. Therefore, the system generates leading compensation currents when the input voltage is larger than the source in magnitude, and lagging compensation currents for smaller input voltage. Reactive power about voluntary load in power system is smoothly compensated by those compensation currents, and also power factor of source is improved. Furthermore, the SVC system using PWM method may improve the source current waveforms by eliminating the 5th and 7th harmonic components from the input voltages.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.395-400
• /
• 2004

In most physical processes, the transfer function includes time-delay, and in the general distributed control system using computer network, there exists inherent time-delay caused by the spatial separation between controllers and actuators. This work deals with the synthesis of a discrete-time controller for a nonlinear system and proposes a new effective method to compensate the influence of input time-delay. The controller is synthesized by using input/output linearization. Under the circumstance that input time-delay exists, the system response has more overshoot and tends to diverge. For these reasons, the controller has to produce future input value that will be needed for the system. In order to calculate the future input value, some predictors are adopted. Using the discretization via Euler's method, numerical simulations about the Van der Pol system are performed to evaluate the performance of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.597-600
• /
• 1997

In this paper, the authors propose a new method for linearizing a nonlinear dynamical system by use of polynomial compensation. In this method, an M-sequence is applied to the nonlinear system and the crosscorrelation function between the input and the output gives us every crosssections of Volterra kernels of the nonlinear system up to 3rd order. We construct a polynomial compensation function from comparison between lst order Volterra kernel and high order kernels. The polynomial compensation function is, in this case, of third order whose coefficients are variable depending on the amplitude of the input signal. Once we can get compensation function of nonlinear system, we can construct a linearization scheme of the nonlinear system. That is. the effect of second and third order Volterra kernels are subtracted from the output, thus we obtain a sort of linearized output. The authors applied this method to a saturation-type nonlinear system by simulation, and the results show good agreement with the theoretical considerations.

• ETRI Journal
• /
• 제29권1호
• /
• pp.45-49
• /
• 2007

The poly-Si thin film transistor (TFT) shows large variations in its characteristics due to the grain boundary of poly-crystalline silicon. This results in unacceptably large input offset of low-voltage differential signaling (LVDS) receivers. To cancel the large input offset of poly-Si TFT LVDS receivers, a full-digital offset compensation scheme has been developed and verified to be able to keep the input offset under 15 mV which is sufficiently small for LVDS signal receiving.

• 융합신호처리학회논문지
• /
• 제9권1호
• /
• pp.18-23
• /
• 2008

본 논문에서는 SR(Super Resolution) 복원 과정에 있어 사용되는 입력 후보 영상 중 적합한 입력 영상을 자동 선택하는 알고리즘을 제안함으로써 복원된 고해상도 영상의 질을 개선하고자 한다. SR 복원과정에서 이상적인 결과 영상을 얻기 위해서는 입력되는 모든 영상이 유기적으로 잘 정합 되어야 하지만, 실제로는 그렇지 못하다. 이런 이유로 입력 후보군 영상의 정합 적합성이 얼마나 높은가가 단순히 많은 입력 영상의 수보다 고품질의 고해상도 결과 영상을 얻는데 더욱 결정적이라 할 수 있다. 입력 영상의 적합성은 통계 특성 및 정합 특성을 이용하여 평가 가능하다. 그러므로 본 논문에서는 SR 복원과정에 정합 적합성을 자동으로 평가하여 이에 따라 입력 영상을 결정하는 전처리 과정을 제안하고 구조화하였다. 또한 비디오 시퀀스의 모든 입력 영상은 SR 복원과정의 기준 영상이나 저해상도 입력 영상과 같이 사용될 수 있으므로 본 논문에서는 연속적인 비디오 시퀀스를 위한 SR 복원알고리즘을 제안한다. 적합성의 유무는 임계값(Threshold Value)에 의해 결정되며, 이 임계값은 기준 영상과의 움직임 추정에서 그 보상 값의 오류 값 중 최대치(MMCE, Maximum Motion Compensation Error)로 결정된다. 만약 저해상도 입력 영상의 보상 오류 값의 범위가 0과 MMCE사이(0 < MCE < MMCE )값이라면 그 범위 안의 입력 후보 영상은 SR 복원과정에 사용되며 범위 밖의 후보영상은 제외된다. 최적의 저해상도 기준(ORLR, Optimal Reference Low Resolution)영상은 선택된 저해상도 입력(SLRI, Selected LR Input)영상들과 각각의 저해상도 기준 입력(RLRI, Reference Low Resolution Input)영상들의 비교를 통해 결정된다. 본 논문에서는 이와 같은 과정에 의해 결정된 저해상도의 최적 기준영상과 선택영상을 'Hardie' 보간법을 사용하여 고해상도 영상을 만들어 내는 것으로 사용자의 조정이 없이도 SR 복원영상의 질적 향상을 가져올 것이라 기대된다.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.59-67
• /
• 2013

This paper presents a neural net type process model for enhancing learning compensation function in hot strip finishing rolling mill. Adequate input and output variables of process model are chosen, the proposed model was designed as single layer neural net. Equivalent carbon content, strip thickness and rolling speed are suggested as input variables, and looper's manipulation variable is proposed as output variable. According to simulation result using process data to show the validity of the proposed process model, neural net type process model's outputs give almost similar data to process output under same input conditions.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.353-357
• /
• 2008

One objective in developing the next generation of wireless communication systems is to increase data rates and reliability. A promising way to achieve this is to combine multiple-input and multiple-output signal processing with a space-time coding scheme, which offers higher coding and diversity gains and improves the spectrum efficiency and reliability of a wireless communication system. It is noted, however, that time delay differences and phase differences among different channels increase symbol interference and degrade system performance. In this letter, we investigate phase differences and their effects on multiple-input and multiple-output systems, and propose a compensation algorithm for the Rayleigh fading model to minimize their effects.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.302-305
• /
• 2021

Selection of the optimal inductance for power factor improvement of a buck AC/DC light-emitting diode (LED) driver with wide input voltage range is described in this study. The power factor change based on the slope compensation is obtained for various normalized output current (NOC) values using discrete-time domain analysis. The possibility of implementing constant slope compensation is described using power factor curves for various NOC values. NOC = 0.5 is chosen for the value of inductance with consideration for the simple implementation and reduction of inductor size. Experimental results of the inductance corresponding to NOC = 0.5 are presented.

• 제어로봇시스템학회논문지
• /
• 제3권1호
• /
• pp.1-8
• /
• 1997

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, if the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers robust stability of this 2DOF servosystem incorporating an observer to the structured and unstructured uncertainties of the controlled plant. A robust stability condition is obtained using Riccati inequality, which is written in a linear matrix inequality (LMI) and independent of the gain of the integral compensator. This result impies that if the plant uncertainty is in the allowable set defined by the LMI condition, a high-gain integral compensation can be carried preserving robust stability to accelerate the tracking response.