• 제목/요약/키워드: inovation

검색결과 22건 처리시간 0.029초

CPW 구조를 이용한 V-band cascode 하향 주파수 혼합기의 설계 및 제작 (Design and fabrication of V-band cascode down-mixer using CPW structure)

  • 안단;채연식;강태신;설우석;임병옥;이진구
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
    • /
    • pp.213-217
    • /
    • 2001
  • 본 논문에서는 CPW 구조를 이용하여 60 GHz 무선 시스템 응용을 위한 V-band용 하향 주파수 혼합기를 설계 및 제작하였다. 하향 주파수 혼합기의 설계 및 제작에 있어서 GaAs PHEMT(Pseudomorphic high electron mobility transistor)를 기반으로 하였으며, 회로설계를 위해 coplanar waveguide(CPW) 라이브러리를 구축하여 이용하였다. 제작된 하향 주파수 혼합기의 변환이득은 국부발진주파수(LO) 입력이 8 dBm일 때 -8.5 dB의 최대 변환이득 특성을 얻었으며 Pl dB는 -3.3 dBm을 얻었다. 제작된 회로의 칩 크기는 1.6$\times$l.6 $\textrm{mm}^2$ 이다.

  • PDF

DAML 구조를 이용한 새로운 구조의 SIR BPF 의 설계 및 제작 (Studies on Fabrication of Novel Micromachined SIR BPF using DAML)

  • 백태종;김성찬;임병옥;신동훈;이진구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.623-626
    • /
    • 2005
  • In this paper, we proposed a new type SIR bandpass filter using DAML. This filter is consisted of 2 layers with MEMS resonator layer and CPW feed line. DAML ring resonator is elevated with $10\;{\mu}m$ height from GaAs substrate. Using MEMS processing, we are able to realize SIR bandpass filter easily. Furthermore it is useful to integrate on conventional MMICs because it has CPW interfaces and ring resonator is isolated from substrate by air-gap. We optimized and measured the results that $S_{21}$ attenuation at rejected band is over 15 dB, insertion loss is inside the limit of 3 dB, and relative bandwidth is about 10 % at 60 GHz

  • PDF

Active Feeback를 이용한 MMIC 광대역 증폭기 설계 (Broadband Amplifier Using Active Feedback Technique)

  • 강태신;안단;윤용순;이진구
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
    • /
    • pp.197-201
    • /
    • 2000
  • In this paper, a MMIC(Monolithic Microwave Integrated Circuit) broadband drive amplifier for wireless communication system has designed using active feedback method. The MMIC brodband amplifier was designed using 0.5$\mu\textrm{m}$ MESFET of ETRI library. Simulation results show that gain is 22 dB, and gain flatness ${\pm}$1 dB. Maximum output power 15 dBm and noise figure 2.5 dB in bandwidth 500 MHz ~3.0 GHz. The MMIC Broadband amplifer's chip area is 14mm${\times}$1.4mm.

  • PDF

마이크로머시닝 기술을 이용한 60 GHz 대역 통과 여파기 (A Micromachined Millimeter-Wave 60 GHz Band-pass Filter)

  • 맹성철;윤태순;김기병;이훈;김종용;이종철;이복형;김해성;신동훈;이진구
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
    • /
    • pp.25-28
    • /
    • 2002
  • In this paper, a micromachined millimeter-wave end-gap band-pass filter (BPF) is presented. The millimeter-wave BPF is designed using 3D design software, Zeland IE3D with the center frequency of 60 GHz, band width of 3 GHz, ripple of 1㏈ and insertion loss of 2.5dB. This type of micromachined BPF can be used in millimeter-wave circuit.

  • PDF

The Influence of Dielectric Constant on Ionic and Non-polar Interactions

  • Hwang, Kae-Jung;Nam, Ky-Youb;Kim, Jung-Sup;Cho, Kwang-Hwi;Kong, Seong-Gon;No, Kyoung-Tai
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권1호
    • /
    • pp.55-59
    • /
    • 2003
  • This work is focused on analyzing ion-pair interactions and showing the effect of solvent induced inter-atomic attractions in various dielectric environments. To estimate the stability of ion-pairs, SCI-PCM ab initio MO calculations were carried out. We show that the solvent-induced attraction or ‘cavitation' energy of the ion-pair interactions in solution that arises mainly from the stabilization of the water molecules by the generation of an electrostatic field. In fact, even the strong electrostatic interaction characteristic of ion-pair interactions in the gas phase cannot overcome the destabilization or reorganization of the water molecules around solute cavities that arise from cancellation of the electrostatic field. The solvent environment, possibly supplemented by some specific solvent molecules, may help place the solute molecule in a cavity whose surroundings are characterized by an infinite polarizable dielectric medium. This behavior suggests that hydrophobic residues at a protein surface could easily contact the side chains of other nearby residues through the solvent environment, instead of by direct intra-molecular interactions.

마이크로 머시닝 기술을 이용한 새로운 구조의 100 GHz DMR bandpass Filter의 설계 및 제작 (Novel 100 GHz Dual-Mode Stepped Impedance Resonator BPF Using micromachining Technology)

  • 백태종;이상진;한민;임병옥;윤진섭;이진구
    • 대한전자공학회논문지SD
    • /
    • 제44권12호
    • /
    • pp.7-11
    • /
    • 2007
  • 본 논문에서는 MMIC 응용을 위한 dielectric-supported air-gapped microstrip line (DAML) 구조를 이용하여 dual-mode stepped impedance 링 공진기를 설계 제작하였다. 링 공진기는 표면 마이크로머시닝 기술을 이용하여 만들어졌다. DAML ring resonator는 다층구조로써 공기중에 위치한 신호선과 MMIC 응용에 적합하도록 CPW가 한 평면에 구성되 있으며 DAML-CPW 트랜지션이 자유로운게 특징이다. DAML 링 공진기는 $10{\mu}m$ 높이로 GaAs 기판 으로부터 띄어져 있다. 대역통과 여파기는 dual-mode 공진을 하며 stepped impedance 이용한 구조이다. 측정결과로 중심주파수 97 GHz에선 감쇠특성은 15 dB, 삽입손실은 2.65 dB를 보였으며, 상대 대역폭은 12 %를 나타냈다. 이같은 구조의 대역통과 여파기는 MMIC 와의 직접화에 유리하다.

A GaAs Micromachined Millimeter-wave Lowpass Filter Using Microstrip Stepped-Impedance Hairpin Resonator

  • Cho Ju-Hyun;Yun Tae-Soon;Baek Tae-Jong;Ko Baek-Seok;Shin Dong-Hoon;Lee Jong-Chul
    • 한국ITS학회 논문지
    • /
    • 제3권2호
    • /
    • pp.85-93
    • /
    • 2004
  • In this paper, microstrip stepped-impedance hairpin resonator (SIR) lowpass filter f.PF) by surface rnicromachining on GaAs substrate is sugsested. This filter has the advantages of compact side, easy fabrication, and sharp cutoff frequency response. The new SIR LPF shows the 3 dB passband of dc to 33 GHz, the insertion loss of 0.82 dB, and the return loss of better than 17 dB up to 25.57 GHz. This filter is useful for many microwave system applications.

  • PDF

BIM 정보를 활용한 장비 선정 Process Inovation에 관한 연구 (A Study on Process Inovation of Tower-Crane Planning by Using BIM)

  • 장세준;윤석헌;백준홍
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2008년도 정기 학술대회
    • /
    • pp.446-449
    • /
    • 2008
  • Construction project has been changing a huge size and the complicated, so information of each parties are overflow. For more successful construction, more communications are required. Nowadays, BIM has been used widely to solve the problem. But BIM information is used by attribute parties. Many of parties cannot use BIM information. Therefore, this study's purpose is to develope prototype of BIM usage for tower crane. It will overcome current information dividing.

  • PDF

기존의 MHEMT와 InP 합성 채널 MHEMT의 소자의 항복 특성 분석 및 비교 연구 (Study of Composite channel Structure of Metamorphic HEMT for the Improved Device Characteristics)

  • 최석규;백용현;한민;방석호;윤진섭;이진구
    • 대한전자공학회논문지SD
    • /
    • 제44권12호
    • /
    • pp.1-6
    • /
    • 2007
  • 본 논문에서 기존에 사용하고 있는 metamorphic high electron transistor (MHEMT)의 채널에 InP를 추가하여 제작 하였다. InP는 In0.53Ga0.47As와 비교하여 낮은 충돌 이온화 계수를 가지고 있다. 그런 특성을 MHEMT의 문제점 중의 하나인 낮은 항복전압의 개선에 이용하였다. 우리는 기존의 MHEMT와 InP 합성 채널 MHEMT의 항복 특성과 주파수 특성을 비교 하였다. 본 논문에서 InP 합성 채널 MHEMT의 on-state와 off-state 항복전압이 각각 2.4와 5.7 V가 측정 되었고 또한 cut-off 주파수와 maximum oscillation 주파수는 각각 160 GHz와 230 GHz가 측정 되었다. 위의 결과는 InP 합성 채널 MHEMT가 밀리미터파 대역의 전력용 소자에 이용되는데 큰 장점을 갖는 소자임을 알 수 있다.