• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1015-1018
• /
• 2004

We investigate the influence of the New Electron Injection Layers (EIL) on the performance of the Alkali Metal Complex vapor-deposited Organic Light Emitting Diodes(OLED). Two different Alkali Metal Complex were used; Lithium Quinolate (Liq), and Sodium Quinolate (Naq). In all cases, $Alq_3$ was the Electron Transporting Layer (ETL). We measure and compare the current density-voltage (J-V) and luminance-voltage (L-V) characteristics. We concluded that the turn-on voltage, and luminance efficiency are controlled by the type of EIL material used. We show the longer life-time OLED with Alkali Metal Complex EIL than OLED with LiF EIL. And we show the Optimized Alkali Metal Complex thickness is 3nm. Existent LiF to because is inorganic material, there is trouble to do epitaxy into thin layers but regulates the thickness in case of Alkali Metal Complex matter characteristic that is easy be. Alkali Metal Complex also appeared by sensitive thing in thickness than LiF If utilize this material, It is thought much advantages may be at common use of OLED.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.445-449
• /
• 2005

Various methods to detect the phytoplankton/red tide blooms in the oceanic waters have been developed and tested on satellite ocean color imagery since the last two and half decades, but accurate detection of blooms with these methods remains challenging in optically complex turbid waters, mainly because of the eventual interference of absorbing and scattering properties of dissolved organic and particulate inorganic matters with these methods. The present study introduces a new method called Red tide Index (Rl), providing indices which behave as a good measure of detecting red tide algal blooms in high scattering and absorbing waters of the Korean South Sea and Yellow Sea. The effectiveness of this method in identifying and locating red tides is compared with the standard Ocean Chlorophyll 4 (OC4) bio-optical algorithm applied to SeaWiFS ocean imagery, acquired during two bloom episodes on 27 March 2002 and 28 September 2003. The result revealed that OC4 bio-optical algorithm falsely identifies red tide blooms in areas abundance in colored dissolved organic and particulate inorganic matter constituents associated with coastal areas, estuaries and river mouths, whereas red tide index provides improved capability of detecting, predicting and monitoring of these blooms in both clear and turbid waters.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.62-65
• /
• 2003

In this study, to confirm corrosion of reinforced concrete affected by carbonation, chloride ion diffusion, absorption ratio, air permeability, measured carbonation velocity coefficient, chloride ion diffusion coefficient, absorption coefficient, air permeability coefficient. Corrosion velocity under environment of complex deterioration. And than compared corrosion velocity with these coefficients. As the results of this study, the correlation coefficient between chloride ion diffusion coefficients and absorption coefficient was revealed that it is very high. As well, an increase in carbonation, chloride ion diffusion also increases corrosion velocity. It showed that corrosion velocity was affected by the carbonation, chloride ion diffusion, absorption ratio, air permeability. Generally, data on the development of these coefficient made with none, organic B, organic A, inorganic B, and inorganic A is shown. It showed that coating of surface prevent steel bar from deteriorating.

• 아시안잔디학회지
• /
• 제7권1호
• /
• pp.31-34
• /
• 1993

There is a growing concern in the United Stares over the environmental and human health implications associated with heavy use of water, pesticides, and inorganic ferilizers in maintaining picture perfect golf courses. There is also a growing awareness that a beautiful course is not necessarily a healthy course. The following discussion reviews the interrelationship of turfgrass and the soil that supports it and provides basic information on currently available alternatives to turf management practices that feature intensive application of inorganic fertilizers. water and pesticides. Soil is a dynamic natural environment in which microorganisms play an important role. Soil contains a large mass of microorganisms which produce thousands of enzymes that can catalyze the transformation and degradation of many organic molecules. (In top soil under optimum conditions may contain 10 billion cells per gram of soil.). Turfgrass and the soil which supports it are interdependent. The natural organic cycle as applied to turf and soil begins with healthy vigorous grass plants storing up the sun's energy in green plant tissues as chemical energy. Animals obtain energy by eating plants and when plants and animals die, their wastes are returned to the soil and provide "food" for soil microorganisms. In the next step of the organic cycle soil microorganisms break down complex plant tissues into more basic forms and make the nutrients available to grass roots. Finally, growing plants extract the available nutrients from the soil. By free operation of this organic cycle, natural grasslands have some of the most fertile soils on earths.

• 한국패류학회지
• /
• 제26권1호
• /
• pp.1-18
• /
• 2010

자연에 존재하는 생명체들은 유기-무기 성분들이 포함된 미세구조로 이루어진 계층학적으로 복잡한유-무기 나노 복합재를 합성한다. 자연에서 진행되는 유기-무기 나노복합재의 생성 및 재생 과정은 생광물화과정으로서 생물학적 환경에서 진행되는 생광물화과정의 연구는 신물질 합성에 대한 단서를 제공할 뿐만 아니라 산업적으로 중요한공정의 개발에 있어 귀중한 지침으로 활용될 수 있다. 연체동물 역시 생광물화과정을 수행하는 다른 생명체들과 마찬가지로 단백질과 다당류로 이루이진 유기매트릭스와 무기물의 상호작용을 통하여 패각을 설계하고 합성한다. 본 고찰에서는 이매패류의 패각 형성 과정 연구를 기반으로 아울러 생광물화과정 연구를 기반으로 한 소재합성과 관련된 생체모방공학 기술을 고찰하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권3호
• /
• pp.396-403
• /
• 2009

Male broiler chicks were fed graded levels of organic zinc (zinc-methionine) supplementation to investigate the effects of partial or complete substitution of the organic zinc source for inorganic ones on the development of lymphoid organs and immunological responses. A total of 450 day-old male broilers were distributed into groups of 10 chicks and randomly assigned to nine experimental diets during a 42-day feeding trial. Dietary treatments consisted of two basal diets supplemented with 40 mg/kg added zinc as feed-grade Zn sulfate or Zn oxide in which, Zn was replaced with that provided from zinc-methionine (ZnMet) complex at the levels of 25, 50, 75 or 100%. Two randomly-selected birds from each pen replicate were bled and then slaughtered by cervical cutting on the final day of the trial to measure leukocyte subpopulations and relative weights of lymphoid organs. Among lymphoid organs, only thymus weight was affected (p<0.05) by dietary treatments. The sulfate-supplemented birds were heavier (p<0.01) in relative weight of thymus than oxide-supplemented birds. The 10 days of age-assessed cutaneous hypersensivity reaction was stronger in chicks fed ZnMet-containing diets. Dietary ZnMet supplementation caused (p<0.05) an increase in proportion of lymphocytes and consequently a decrease in heterophil to lymphocyte ratio. Diet fortification by zinc-methionine complex increased (p<0.01) Newcastle antibody titer at 19 days of age. Also, a similar response was observed in antibody titers at 6 and 12 d after infectious bronchitis vaccine administration. There was no significant effect of replacement of dietary zinc on antibody titer against infectious bursal disease virus (IBDV) at the 6th d post-vaccine inoculation; however, at d 12 after vaccination, ZnMet-fortified diets improved antibody titer against IBDV. Although dietary inclusion of ZnMet had no marked effect on primary antibody titer against sheep erythrocytes, effective responses were observed during secondary reaction from the viewpoint of both total antibody and immunoglobulin Y (IgY) titers. From the present findings, it can be concluded that dietary supplementation with organic zinc improves both cellular and humoral immune responses. It is necessary to replace 75% of supplemental inorganic zinc with organic ZnMet complex to achieve the optimum immunological responses in broiler chicks.

• 공학논문집
• /
• 제7권1호
• /
• pp.79-87
• /
• 2005

Na-Montmorillonite와 10-Carboxy-n-decyltriethylammonium bromide (유기 양이온) 사이의 양이온 교환반응에 의해 얻어진 [TEACOOH]-Montmorillonite 층간화합물을 유기 단분자인 $\varepsilon$-caprolactone을 반응시켜 [TEACOOH]-$\varepsilon$-caprolactone-Montmorillonite 층간화합물을 형성하였다. 이렇게 얻어진 [TEACOOH]-$\varepsilon$-caprolactone-Montmorillonite 층간화합물을 $220^{\circ}C$의 온도 하에서 48시간 동안 가열하여 고분자화시켜 무기물질인 몬모릴로나이트와 유기 고분자인 폴리카프로락톤이 화학적으로 결합된 몬모릴로나이트/폴리카프로락톤 나노복합재료를 제조하였다. 고분자화반응을 수행한 후 얻어진 시료를 메탄올을 이용하여 추출한 뒤 고진공 하에 $65^{\circ}C$로 24 시간 동안 건조시킨 후에 얻은 층간거리 값으로는 34.24 $\AA$이 얻어졌다.

• 펄프종이기술
• /
• 제29권3호
• /
• pp.7-16
• /
• 1997

The constituents of deposits on paper machine and holes/spots in paper have been studied by consequently a combination of analytical techniques, such as FTIR, Py-GC-MS, and. EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as preliminary analysis technique. The analysis of organic components were carried out with the use of a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analysed by SEM equipped with an EDS analyzer after pyrolysis at 59$0^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic contents of fatty acid ester and starch, and the inorganic contents of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable AKD and CaCO$_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP that were streamed out from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streak on coating.

• Journal of Animal Science and Technology
• /
• 제63권6호
• /
• pp.1386-1396
• /
• 2021

Copper is an essential mineral for pigs, thus it is used as a feed additive in the forms of copper sulfate. Therefore, this study aimed at characterizing the fecal microbiota shifts in pigs as fed by different forms of copper supplementation. 40 growing pigs aged 73 ± 1 days with an average weight of 30.22 ± 1.92kg were randomly divided into 5 groups. The control group (CON) fed with basal diet, while treatment groups were fed a basal diet supplemented with 100 ppm/kg of copper sulfate (CuSO₄), Cu-glycine complex (CuGly), Cu-amino acid complex (CuAA), and Cu-hydroxy(4methylthio)butanoate chelate complex (CuHMB) for 28 days of trial, respectively. The data presented the comparison between inorganic and organic copper supplementation through gut microbiota in growing pigs. Alpha and Beta diversity anaylsis resulted in copper supplementation did shifted gut microbioal community structure. At the phylum level, Firmicutes and Bacteroidetes were the most abundant phyla at all times regardless of treatment. At the genus level, the relative abundances of Prevotella, Lactobacillus, Megasphaera, and SMB53 of the CuGly and CuHMB groups were significantly higher than those of copper sulfate and basal diet groups. Overall, this study may provide the potential role of organic copper replacing inorganic copper, resulting in increased beneficial bacteria in the pig gut.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.538-544
• /
• 2022

In existing ceramic mold manufacturing processes, inorganic binder systems (Si-Na, two-component system) are applied to ensure the effective firing strength of the ceramic mold and core. These inorganic binder systems makes it possible to manufacture a ceramic mold and core with high dimensional stability and effective strength. However, as in general sand casting processes, when molten metal is injected at room temperature, there is a limit to the production of thin or complex castings due to reduced fluidity caused by the rapid cooling of the molten metal. In addition, because sodium silicate generated through the vitrification reaction of the inorganic binder is converted into a liquid phase at a temperature of 1,000 ℃. or higher, it is somewhat difficult to manufacture parts through high-temperature casting. Therefore, in this study, a high-strength ceramic mold and core test piece with effective strength at high temperature was produced by applying a Si-Na-Ti three-component inorganic binder. The starting particles were coated with binary and ternary inorganic binders and mixed with an organic binder to prepare a molded body, and then heat-treated at 1,000/1,350/1,500 ℃ to prepare a fired body. In the sample where the two-component inorganic binder was applied, the glass was liquefied at a temperature of 1,000 ℃ or higher, and the strength decreased. However, the firing strength of the ceramic mold sample containing the three-component inorganic binder was improved, and it was confirmed that it was possible to manufacture a ceramic mold and core via high temperature casting.