• 헤리티지:역사와 과학
• /
• 제45권1호
• /
• pp.86-101
• /
• 2012

운주사 원형다층석탑의 주요 구성암석은 암편질응회암과 유문암질 각력응회암으로 담녹색 및 회색을 띠며 원마도가 불량한 암편을 함유하고 있다. 암편질응회암은 유리질 기질과 은미정질의 장석과 석영이 보이고 미정질 결정들이 나타난다. 유문암질 각력응회암에서는 장석 및 불투명 광물로 이루어진 기질에 석영과 장석이 반정으로 관찰된다. 석탑의 모든 부재에는 먼지, 박리박락, 공동, 탈락, 균열이 발달되어 있으며, 적외선 열화상 촬영 결과 부분적으로 내부 공극이 상당히 진행되어 박리를 유발하고 있는 상태이다. 또한 서측과 북측의 3층 이상 옥개석 상부에서는 회색, 녹색, 황갈색 등의 다양한 지의류 및 선태류들이 높은 점유율을 보인다. 기단부와 옥개석에는 산화망간, 산화철 및 수산화철 등의 무기오염물에 의한 변색이 나타난다. 석탑 부재의 화학적 풍화지수(CIA)와 풍화잠재지수(WPI)를 산출한 결과, 각각 55.69, 1.12로 상당히 풍화가 진행되었으며 초음파속도는 평균 2,892m/s, 풍화도지수와 일축압축강도는 각각 0.4k, $1,096kg/cm^3$로 암석의 강도와 내구성이 약화된 상태이다.

• 한국환경보건학회지
• /
• 제29권1호
• /
• pp.51-61
• /
• 2003

Pollution purification using titanium dioxide (TiO$_2$) photocatalyst has attracted a great deal of attention with increasing number of relent environmental problems. Currently, the application of TiO$_2$ photocatalyst has been focused on purification and treatment of waste water. However. the use of conventional TiO$_2$ powder photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we herein studied the pilot-scale design to aid in optimization of the energy-saving process for more through development and reactor design by solar light/UV lamp/ TiO$_2$system. In this study, we manufactured the TiO$_2$sol by sol-gel method. According to analysis by XRD, SEM and TEM, characterization of TiO$_2$ sol were nano-size (5-6 nm) and anatase type. Inorganic binder (SiO$_2$) was added to TiO$_2$ lot to be coated for support strongly, and support of ceramic bead was used to lower separation rate that of glass bead The influences were studied of various experimental parameters such as TiO$_2$ quantity, pH, flow rate. additives, pollutants concentration, climate condition and reflection plate by means of reaction time of the main chararteristics of the obtained materials. In water treatment system, variable realtor as solar light/ or UV lamp according to climate condition such as sunny and cloudy days treated the phenol and E-coli(Escherichia coli) effectively.

• 한국지반환경공학회 논문집
• /
• 제3권4호
• /
• pp.5-10
• /
• 2002

Pistia stratiotes(Water Lettuce)는 고도처리를 위한 폐수로부터 무기오염원 제거에 적용되어질 수 있다. 본 연구는 2차 처리된 폐수로부터 중금속을 제거하기 위하여 시도하였다. 납(Pb)과 크롬(Cr(VI))의 초기 농도를 0.5, 1.0, 1.5mg/L로 각각 다르게 적용되어 졌다. 그 외에 납(Pb)과 크롬(Cr(VI))을 혼합하여 제거효율을 관찰하였다. Pistia stratiotes에 의해 납(Pb)은 41.0~72.0%의 제거효율을 보였고 크롬(Cr(VI))은 25.0~30.0%의 제거효율을 보였다. Pistia stratiotes는 정지된 상태에서 수일 동안 중금속에 노출되어 중금속을 제거할 수 있었다. 그러나, 중금속은 식물에 독성을 일으켜 엽록소합성을 억제하고 생체량이 감소하면서 결국은 식물의 일부가 사멸하는 것이 관찰되었다. Pistia stratiotes에 의한 납(Pb)과 크롬(Cr(VI))의 제거효율은 식물의 성장과 함께 증가하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.499-502
• /
• 2004

Groundwater chemistry in a coastal region having complex contaminant sources was investigated. Water analysis data for 197 groundwater samples collected from the uniformly distributed sixty-six wells were used. Chemical analysis rand results indicate that groundwaters show wide concentration ranges in major inorganic ions, reflecting complex hydrochemical processes of pollutants. Due to the complexity of groundwater chemistry, Results illustrate that thirty five percent of the wells do not fit for drinking based on nitrate and chloride concentration in the study area. the samples were classified into four groups based on Cl and NO$_3$ concentrations and the processes controlling water chemistry were evaluated based on the reaction stoichiometry. The results explained the importance of mineral weathering, anthropogenic activities (nitrification and oxidation of organic matters), and Cl-salt inputs (seawater, deicer, NaCl, etc.) on groundwater chemistry. It was revealed that mineral dissolution is the major process controlling the water chemistry of the low Cl and NO$_3$ group (Group 1). Groundwaters high in NO$_3$ (Groups 2 and 4) are acidic in nature, and their chemistry is largely influenced by nitrification, oxidation of organic matters and mineral dissolution. In the case of chloride rich waters (Group 3), groundwater chemistry is highly influenced by mineral weathering and seawater intrusion associated with cation-exchange reactions.

• 한국습지학회지
• /
• 제11권3호
• /
• pp.9-19
• /
• 2009

본 연구에서는 계화간척농지로부터 발생 되는 비점원 오염물질 유출현황을 조사하였다. 간척 논면적은 2,988ha로 크게 1,181ha와 1,817ha 크기의 두개의 소유역으로 구성되어 있다. 두개의 소유역에 대해 각각 3번의 강우사상에 대해 조사가 이루어졌으며 강우량은 각각 66.0, 23.5, 23mm이었다. 간척농지에서 오염물질 유출 특성은 일반 내륙의 논에서와 다른 양상을 나타내었다. 일반적으로 우리나라 논에서는 발생되는 비점오염부하는 큰 반면에 연구대상 간척농지에서 발생되는 TSS, TN, TP의 비점오염 유출수준은 일반 임야지역 수준으로 나타났다. 다른 유역과 다르게 질소의 경우 용존성 유기질소가 주종을 이루고 있으며 인의 경우에는 용존성 인이 주종을 이루고 있었다.

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.131-142
• /
• 2015

This study investigated physicochemical and optical characteristics for three episodes of Asian dust, stagnant haze and long-range transport haze and for one clean day. $PM_{10}$ mass concentration during Asian dust and two haze days was increased by 2~9 times compared to that of clean episode. During Asian dust episode, coarse particle concentration was increased and the mass concentration of calcium in a coarse mode ($1.8{\sim}10{\mu}m$) was $5.4{\mu}g/m^3$ which was 7 times higher than that of clean episode. The calcium was presented as a form of $CaCO_3$ in a coarse mode. During the two haze episodes, fine particle (< $1.8{\mu}m$) concentration was increased and secondary inorganic pollutants such as sulfate, ammonium and nitrate composed of 90% of the total ions. $(NH_4)_2SO_4$ and $NH_4NO_3$ were dominant in a fine mode for stagnant haze episode. But they were the most dominant form in both fine mode and coarse mode for long-range transport haze episode. According to the optical properties for each episode (Asian dust, stagnant haze and long-range transport haze) were classified as dust, black carbon and mixture, respectively.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.151-159
• /
• 2015

PURPOSE. To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS. A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non- quantitatively. RESULTS. All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION. The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.77-86
• /
• 2020

Persulfate-based advanced oxidation processes (AOPs) can oxidize various organic pollutants. In this study, persulfate/Fe(II) system was utilized in phenol removal, and the effect of various organic and inorganic chelators on Fe(II)-medicated persulfate activation was investigated. The feasibility of persulfate/Fe(II)/chelator in cleanup of phenol-contaminated sediment was confirmed through toxicity assessment. In persulfate/Fe(II) conditions, the rate and extent of phenol removal increased in proportion to persulfate concentration. In chelator injection condition, the rate of phenol removal was inversely proportional to chelator concentration when it was injected above optimum ratio. Thiosulfate showed greater chelation tendency with persulfate than citrate and interfered with persulfate access to Fe(II), making the latter a more suitable chelator for enhancing persulfate activation. In contaminated clay sediment condition, 100% phenol removal was obtained within an hour without chelator, with the removal rate increased up to four times as compared to the rate with chelator addition. A clay sediment toxicity assessment at persulfate:Fe(II):phenol 20:10:1 ratio indicated 71.3% toxicity reduction with 100% phenol removal efficiency. Therefore, persulfate/Fe(II) system demonstrated its potential utility in toxicity reduction and cleanup of organic contaminants in sediments.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.163-173
• /
• 2023

The presence of high amounts of organic and inorganic contaminants in textile wastewater is a major environmental concern. Therefore, the treatment of textile wastewater is an urgent issue to save the aquatic environment. The disposal of large quantities of untreated textile wastewater into inland water bodies can cause serious water pollution. In this study, synthetic dye wastewater samples were prepared using orange dye in the laboratory. The synthetic samples were then treated by a batch adsorption process using the prepared activated carbon (AC) from date pits. The wastewater parameters studied were the pH, total dissolved solids (TDS), total suspended solids (TSS), electrical conductivity (EC) and salinity. The activated adsorption process showed that the maximum removal efficiencies of electric conductivity (EC), salinity, TDS and TSS were 65%, 92%, 89% and 90%, respectively. The removal efficiencies were proportional to the increase in contact time (30-120 min) and AC adsorbent dose (1, 3 and 5 g/L). The adsorption profile indicates that 5 g/L of adsorbent delivers better results for TDS, EC, TSS and salinity at contact time of 120 min. The adsorption characteristics are better suited to the pseudo-second-order kinetic model than to the pseudo-first-order kinetic model. The Langmuir and Freundlich isotherms were well suited for describing the adsorption or contact behavior of EC and TSS within the studied system.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.279-284
• /
• 2015

전 세계적으로 셰일가스와 같은 비전통 석유자원이 널리 개발되고 있다. 이에 따라 셰일가스 채굴과정에서 발생하는 폐수의 적절한 처리가 중요해지고 있다. 그러나, 폐수 내의 오일 및 유기 물질, 유해성 화학물질, 무기 이온과 같은 물질이 고농도로 함유하고 있기 때문에 기존 처리 방법으로 많은 어려움을 격고 있다. 본 연구에서는 셰일가스 폐수에 대한 새로운 처리방법으로 정삼투 공정 및 막증발법에서의 가능성을 연구하였다. 실험실 규모의 정삼투 및 막증발법 장치를 제작하여 실험을 실시하였다. 그 결과, 합성 폐수를 처리하는데, 정삼투 공정에서 적용 가능하다고 판단되었다. 유도용액으로 5M의 염화나트륨수용액을 사용하였고, 낮은 범위의 폐수(66,000mg/L TDS)에서 약 $6L/m^2-hr$의 플럭스를 나타냈다. 그럼에도 불구하고, 높은 범위의 폐수(261,000mg/L TDS)에서 막증발법으로 처리하는 것이 더 효과적이었다.