• 한국환경과학회지
• /
• 제26권4호
• /
• pp.447-456
• /
• 2017

Chemical properties of aerosols were investigated by analyzing the inorganic water-soluble content in $PM_{2.5}$ collected in the downtown area of Jeju City in Jeju Island. Due to an increase in both the number of visiting tourists and the size of local population, the number of cars in this area is increasing, causing an increase in $PM_{2.5}$. Eight $PM_{2.5}$-bound major inorganic ions were analyzed during the summer and winter periods. The water-soluble inorganic component represents a significant fraction of $PM_{2.5}$. In particular, secondary inorganic aerosols contribute 36.2% and 47.5% of $PM_{2.5}$ mass in summer and winter, respectively. Nitrate concentrations increase for $[NH_4{^+}]/[SO_4{^{2-}}]$>1.5, and excess ammonium, which is necessary for ammonium nitrate formation, is linearly correlated with nitrate. These results are clearly observed during the winter because conditions are more conducive to the formation of ammonium nitrate. A significant negative correlation between Nitrogen Oxidation Ratio (NOR) and temperature was observed. The obtained results can be useful for a better understanding of the aerosol dynamics in the downtown area in Jeju City.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.347-355
• /
• 2015

The growth kinetics of phototrophic microorganisms can be controlled by the light irradiance, the concentration of an inorganic nutrient, or both. A multi-component kinetic model is proposed and tested in novel batch experiments that allow the kinetic parameters for each factor to be estimated independently. For the cyanobacterium Synechocystis sp. PCC6803, the estimated parameters are maximum specific growth rate $({\mu}_{max})=2.8/d$, half-maximum-rate light irradiance $(K_L)=11W/m^2$, half-inhibition-rate light irradiance $(K_{L,I})=39W/m^2$, and half-maximum-rate concentration for inorganic carbon $(K_{S,Ci})=0.5mgC/L$, half-maximum-rate concentration for inorganic nitrogen $(K_{S,Ni})=1.4mgN/L$, and half-maximum-rate concentration for inorganic phosphorus $(K_{S,Pi})=0.06mgP/L$. Compared to other phototrophs having ${\mu}max$ estimates, PCC6803 is a fast-growing r-strategist relying on reaction rate. Its half-maximum-rate and half-inhibition rate values identify the ranges of light irradiance and nutrient concentrations that PCC6803 needs to achieve a high specific growth rate to be a sustainable bioenergy source. To gain the advantages of its high maximum specific growth rate, PCC6803 needs to have moderate light illumination ($7-62W/m^2$ for ${\mu}_{syn}{\geq}1/d$) and relatively high nutrient concentrations: $N_i{\geq}2.3 mgN/L$, $P_i{\geq}0.1mgP/L$, and $C_i{\geq}1.0mgC/L$.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.250-258
• /
• 2016

오늘날 시멘트 산업은 시멘트 제조시 발생되는 이산화탄소($CO_2$)의 배출량을 줄이기 위해 각종 산업부산물을 연료의 대체재로 사용하거나 건설폐기물을 재활용한 콘크리트 제 2차 제품을 개발하는 등 환경부하 저감 산업으로 변모하기 위해 노력하고 있다. 이에 본 연구에서는 국내 발생되는 건설폐기물의 종류와 발생추이를 고찰함과 건설폐기물을 활용한 재생시멘트 개발에 관련된 선행연구를 분석함으로서 재활용 가능한 무기계 건설폐기물에 선정하고 수집하여 분석하였다. 수집된 무기계 건설폐기물의 각 화학성분은 XRF장비를 이용하여 분석하였으며, 국내 시판되는 시멘트의 화학성분을 기준으로 무기계 건설폐기물을 조합하여 보그(Bogue)식을 활용한 소성이후 생성되는 클링커(clinker)의 광물성분을 예측 분석하였다. 그 결과, 폐석고보드와 폐천장재가 다량의 산화칼슘(CaO)을 함유하고 있어 시멘트 제조시 중요하게 사용되는 석회석의 대체재로서 활용 가능한 것을 확인하였으며, 이러한 무기계 건설폐기물을 적절히 조합한다면 1종 이외에 다양한 포틀랜드 시멘트 개발도 가능할 것으로 사료된다. 본 연구는 실험적 연구에 앞서 이론적 배합에 관한 연구로 무기계 건설폐기물을 이용한 환경부하 저감형 재생시멘트 개발의 가능여부를 분석하고자 하였다.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.320-326
• /
• 2004

We have extracted the natural pine-needles to use ethanol in solvent, and could obtain the refined oil component from pine-needles extract. We have tested the antimicrobial effect from microbe experiment and analyzed with ICP/OES, GC/MS. we could obtain the next conclusion from the result of this experiment. In the first result of this experiment we could know that in case of increasing concentration of pine-needles, the number of microbe decreased more and more. Also we could know that the refined oil component of pine-needles appeared the sterilization effect of S-aureus and E-coli after 96hrs and 120hrs. So we could know that the refined oil component of appeared effect to microbe. In the second result of this experiment we could know that inorganic materials of Ca, Mg, V, Mn etcs from pine-needles detected to ICP/OES analysis and the aromatic compounds from refined oil component of pine-needles was certificated to GC/MS analysis.

• 한국결정성장학회지
• /
• 제4권4호
• /
• pp.378-387
• /
• 1994

선행연구[1] 즉, $Ti0_2/Pb/TiO_2(900{\AA}/900{\AA}/900{\AA}/)$ 3층구조박막으로부터 열확산에 의해 상형성이 가능하였던 $PbTiO_3$ 박막의 특성을 개선하기 위하여 스퍼터링법을 이용하여 Si기판위에 각 요소층의 두께를 $200~300 {\AA}$으로 얇게하고 적층수를 3,5,7,9,11층$(TiO_2/Pb/.../Tio_2)$으로 변화시켜가며 다층구조박막을 형성한 후 이를 RTA 처리하여 $PbTiO_3$ 박막을 제조하였다. 그 결과 $500^{\circ}C$ 이상에서 단일상의 $PbTiO_3$가 형성되었다. 또한 요소층의 두께를 얇게하고 적층수를 늘려서 열처리한 결과 Pb-silicate 및 void 생성이 억제되어 우수한 계면상태를 유지하였으며 조성도 보다 균일해지는 양상을 나타내었다. $PbTiO_3$ 박막의 MiM구조에 C-V 특성으로부터 측정된 유전상수는 열처리 조건에 따른 경향을 나타내지 않았으나 적층수가 많아져 박막의 두께가 증가 할수록 유전상수가 증가하였다. MIS 구조의 $PbTiO_3$ 박막의 I-V 특성 측정 결과 절연파괴강도는 최고 150kV/cm이었다.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.341-353
• /
• 2016

Papermaking reconstituted tobacco is an important strategy for recycling the waste tobacco residues. To indentify the influences of the inorganic components on harmful components delivery in cigarette smoke, a self-made electrodialysis stack was assembled to desalt the tobacco extract. The influences of the applied current and extract content on the removal rate of the inorganic ions were investigated. Results indicated that the applied current was a dominant impact on the desalination performance. High currents lower than the limiting current density could accelerate the desalting efficiency but cause higher energy consumption. A current of 2 A, or current density of ${\sim}11mA{\cdot}cm^{-2}$, was an optimal choice by considering both the energy consumption and desalting efficiency. A 20% tobacco extract was an appropriate content for the electrodialysis process. More than 90% of inorganic ions could be removed under the optimum condition. The preliminary result indicated that removal of inorganic components was beneficial to decrease the harmful component delivery in cigarette smoke. Naturally, ED is an environmentally friendly and high-effective technology for desalting the tobacco extract.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.265-272
• /
• 2002

$CaCO_{3}$ absorbed sodium lauryl sulfate (SLS) surfactant was prepared, Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using styrene(St) as a shell monomer and potasium persulfate (KPS) as an initiator, We found that when $CaCO_{3}$; core prepared by adding 2,0 wt% SLS, $CaCO_{3}$ core/PSt shell polymerization was carried out on the surface of $CaCO_{3}$ particle without forming the new PSt particle during St shell polymerization in the inorganic/organic core-shell polymer preparation, The structure of core-shell polymer were investigated by measuring the degree of decomposition of $CaCO_{3}$ using HCl solution, thermal decomposition of polymer composite using thermogravimetric analyzer and morphology by scanning electron microscope.

• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.47-54
• /
• 2020

본 연구에서는 밝고 화사한 적색 및 황색의 착색 특성을 가지며, 우수한 발광특을 가진 새로운 무기 형광 안료를 개발하기 위하여, A₃V₅O₁₄ (A = K and Rb) 및 Cs₂V₄O₁₁를 water assisted solid state reaction(WASSR) 방법과 고상법을 혼합하여 합성을 하였다. 합성한 A₃V₅O₁₄ (A = K and Rb ) 및 Cs₂V₄O₁₁ 샘플은 AVO₃ 및 AV₃O₈ (A = K, Rb and Cs)가 불순물로 다소 확인되었으나, trigonal 구조의 A₃V₅O₁₄ (A = K and Rb)와 orthorhombic 구조의 Cs₂V₄O₁₁가 주상으로 확인되었다. A₃V₅O₁₄ (A = K and Rb)와 Cs₂V₄O₁₁는 자외선 영역에서 강한 광흡수를 나타내었으며, 각각 적색광 및 녹색광 발광을 나타내었다. 또한, 합성된 A₃V₅O₁₄ (A = K and Rb)는 a* 값 (+ : 적색도, -: 녹색도)은 각각 + 35.5와 + 45.9를, Cs₂V₄O₁₁는 b* 값(+: 황색도, -: 청색도)는 + 50.3을 나타내었으며, 45 이상의 L* 값(명도)을 가지고 있어, 밝고 화사한 느낌을 구현하기위한 황색안료로 응용이 가능할 것으로 기대된다.

• The Korean Journal of Ecology
• /
• 제28권3호
• /
• pp.163-168
• /
• 2005

본 연구는 우리나라 난대 지역에 분포하는 주요 상록수종 중 하나인 동백나무 임분을 대상으로 각 부위별 지상부 생체량을 추정하고, 주요 무기영양소의 분포를 파악하기 위하여 실시하였다. 조사지는 전남 장흥군 천관산내 동백나무 임분에서 실시하였으며, 부위별 생체량 추정식은 흉고 직경 단일 변수에 의한 직경 변수 모형을 적용하였다(logY = a + blogD, Y: 중량, D: 흉고 직경). 동백나무 임분의 부위별 생체량(ton/ha)은 주간 47.9, 당년생 소지(小枝) 1.4, 1년생 이상 가지 전체 53.4, 엽 12.5로 추정되었으며, 전체 지상부 생체량은 115.2 ton/ha이었다. 동백나무 부위별 생체량은 흉고 직경과 비선형 관계에 있었으며, 1년생 이상 엽은 흉고직경이 증가할수록 당년생 엽과의 생체량 차이가 커지는 경향을 보였다. 생지의 질소, 인산, 칼륨 농도는 고사지보다 높았으나, 칼슘 농도는 고사지가 생지보다 높았고, 당년생엽도 1년생 이상 엽보다 질소, 인산, 칼륨 농도가 높았으나, 칼슘과 나트륨 농도는 오히려 1년생 이상 엽의 농도가 높았다. 주요 무기 영양소 함량(kg/ha)은 칼륨 366.4, 질소 442.7, 칼슘 433.3, 마그네슘 118.4, 인산 50.5 및 나트륨 25.3 순이었다. 모든 무기영양소 함량에서 생지 내에 함유된 무기영양소 함량의 비율이 수체내에서 가장 높았다.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.8-13
• /
• 2012

The flexography ink has disadvantage in a deinking process because it tends to form too fine particles in alkali condition to be removed in flotation deinking. The influence of pH conditions on the particle size of phthalocyanine cyan ink used for flexo-printing was investigated to see the effect of pH conditions on flexography ink dispersion. Flexography ink particles prepared by grinding dried ink films were used in this experiment. Greater reduction of the ink particle size was noticed under alkaline pH condition, which was attributed to dissolution of resin component of the ink. Adsorption behavior of flexography ink onto pigment particles was examined using clay and talc as substrate pigments. Pretreatment of inorganic pigments with a cationic poly-DADMAC increased the surface adsorption of flexography ink particles, which improved the removal of the inks by centrifugal sedimentation of inorganic pigments. Most efficient removal of the ink particles was achieved when an optimal addition level of the cationic polymer was used for pretreatment of inorganic pigments, and this optimal addition level corresponds to the surface saturation point of the polyelectrolyte. Adsorption of flexography ink particles onto inorganic pigments improved the ink removal in flotation deinking since the pigment particles has the optimal particle size for flotation deinking.