• Title/Summary/Keyword: innovative design

Search Result 1,191, Processing Time 0.025 seconds

A Study on the Emissions Characteristics of a LPG Vehicle According to Various Test Modes and Ambient Conditions (다양한 시험모드와 환경조건에 따른 LPG 차량의 배출특성 연구)

  • Lee, Min-Ho;Ha, Jong-Han
    • Journal of the Korean Institute of Gas
    • /
    • v.19 no.4
    • /
    • pp.1-7
    • /
    • 2015
  • As the interest on the air pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward various main issues : whether PM emissions should be regulated for diesel and gasoline vehicles and whether gasoline and LPG powered vehicles can be further neglected from PM emission inventories. Finally, the greenhouse gas regulation has been discussed including automotive emission regulation. The greenhouse gas and emissions of automotive had many problem that cause of ambient pollution, health effects. Based on various test modes and ambient conditions, this paper discusses the characteristics of LPG on exhaust emissions and greenhouse gases. Also, this paper assessed emission characteristics due to the test temperature. These test temperature were performed by dividing the temperature of the test mode and the lowest local temperature in winter. Through this study, the correlation of vehicle test mode and ambient condition, exhaust emission, greenhouse gas emission was analyzed.

Discoloration of various CAD/CAM blocks after immersion in coffee

  • Lauvahutanon, Sasipin;Shiozawa, Maho;Takahashi, Hidekazu;Iwasaki, Naohiko;Oki, Meiko;Finger, Werner J.;Arksornnukit, Mansuang
    • Restorative Dentistry and Endodontics
    • /
    • v.42 no.1
    • /
    • pp.9-18
    • /
    • 2017
  • Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.

Topology of High Speed System Emulator and Its Software (초고속 시스템 에뮬레이터의 구조와 이를 위한 소프트웨어)

  • Kim, Nam-Do;Yang, Se-Yang
    • The KIPS Transactions:PartA
    • /
    • v.8A no.4
    • /
    • pp.479-488
    • /
    • 2001
  • As the SoC designs complexity constantly increases, the simulation that uses their software models simply takes too much time. To solve this problem, FPGA-based logic emulators have been developed and commonly used in the industry. However, FPGA-based logic emulators are facing with the problems of which not only very low FPGA resource usage rate due to the very limited number of pins in FPGAs, but also the emulation speed getting slow drastically as the complexity of designs increases. In this paper, we proposed a new innovative emulation architecture and its software that has high FPGA resource usage rate and makes the emulation extremely fast. The proposed emulation system has merits to overcome the FPGA pin limitation by pipelined ring which transfers multiple logic signal through a single physical pin, and it also makes possible to use a high speed system clock through the intelligent ring topology. In this topology, not only all signal transfer channels among EPGAs are totally separated from user logic so that a high speed system clock can be used, but also the depth of combinational paths is kept swallow as much as possible. Both of these are contributed to achieve high speed emulation. For pipelined singnals transfer among FPGAs we adopt a few heuristic scheduling having low computation complexity. Experimental result with a 12 bit microcontroller has shown that high speed emulation possible even with these simple heuristic scheduling algorithms.

  • PDF

Effect of Foundation Flexibility of Offshore Wind Turbine on Force and Movement at Monopile Head (해상풍력발전기 기초구조물의 강성이 모노파일 두부의 부재력 및 변위에 미치는 영향)

  • Jung, Sungmoon;Kim, Sung-Ryul;Lee, Juhyung;Le, Chi Hung
    • Journal of the Korean Geosynthetics Society
    • /
    • v.13 no.4
    • /
    • pp.21-31
    • /
    • 2014
  • Recently, the research on renewable energy against depletion of fossil fuel have been actively carried out in the world. Especially, offshore wind turbines are very economical and innovative technology. However, offshore wind turbines experience large base moments due to the wind and wave loading, so the monopile with large diameter needs to be applied. For the economical design of the large diameter pile, it is important to consider the flexibility of the foundation to estimate the maximum moment accurately, based on studies conducted so far. In this paper, the foundation was modeled using the finite element method in order to better describe the large diameter effect of a monopile and the results were compared with those of p-y method. For the examples studied in this paper, the change in maximum moment was insignificant, but the maximum tilt angle from the finite element method was over 14% larger than that of p-y method. Therefore, the finite element approach is recommended to model the flexibility effect of the pile when large tilt angles may cause serviceability issues.

Study on Location Decisions for Cloud Transportation System Rental Station (이동수요 대응형 클라우드 교통시스템 공유차량 대여소 입지선정)

  • Shin, Min-Seong;Bae, Sang-Hoon
    • Journal of Korean Society of Transportation
    • /
    • v.30 no.2
    • /
    • pp.29-42
    • /
    • 2012
  • Recently, traffic congestion has become serious due to increase of private car usages. Carsharing or other innovative public transportation systems were developed to alleviate traffic congestion and carbon emissions. These measures can make the traffic environment more comfortable, and efficient. Cloud Transportation System (CTS) is a recent carsharing model. User can rent an electronic vehicles with various traffic information through the CTS. In this study, a concept, vision and scenarios of CTS are introduced. And, authors analyzed the location of CTS rental stations and estimated CTS demands. Firstly, we analyze the number of the population, employees, students and traffic volume in study areas. Secondly, the frequency and utilization time are examined. Demand for CTS in each traffic zone was estimated. Lastly, the CTS rental station location is determined based on the analyzed data of the study areas. Evaluation standard of the determined location includes accessibility and density of population. And, the number of vehicles and that of parking zone at the rental station are estimated. The result suggests that Haewoondae Square parking lot would be assigned 11 vehicles and 14.23 parking spaces and that Dongbac parking lot be assigned 7.9 vehicles and 10.29 parking spaces. Further study requires additional real-time data for CTS to increase accuracy of the demand estimation. And network design would be developed for redistribution of vehicles.

Design and Implementation of a Network Programming Language (네트워크를 고려한 프로그래밍언어의 설계와 구현)

  • Won, Yu-Hun;Han, Tae-Suk
    • Journal of KIISE:Software and Applications
    • /
    • v.26 no.11
    • /
    • pp.1359-1371
    • /
    • 1999
  • 대규모 네트워크 상에서 동작하는 분산 시스템의 구현을 위해 제시된 방법 중의 하나인 이동 코드 개념은 네트워크 공유 자원에 접근할 수 있는 효과적인 방법을 제시하였고 이 개념을 지원하는 많은 언어들의 개발을 가져왔다. 개발된 언어들이 가지고 있는 이동 코드를 지원하기 위한 언어 구문과 적용하려는 문제 영역의 특성을 반영한 언어 구문은 네트워크 프로그래밍을 하는데 있어서 효율과 문제 중심의 프로그램의 두 가지를 모두 가능하게 하고 있다. 본 논문에서는 현재 분산 컴퓨팅 환경에서 가장 많이 사용되고 있는 클라이언트-서버 모델을 확장하여 서버의 자원에 접근할 수 있는 또 다른 방법을 가진 모델을 제시하고, 이 모델을 표현할 수 있는 언어를 설계하였다. 설계된 언어는 이동 코드의 개념을 지원함으로써 대규모 네트워크에서 수행되는 프로그램의 작성을 가능하게 하고, 분산 범위 규칙을 채택함으로써 이동 코드의 기술을 일반 함수를 기술하듯 명확한 관점에서 할 수 있도록 하였다. 또한 네트워크 관련 자원들을 언어 구문으로 채택하여 네트워크 프로그래밍을 언어 수준에서 할 수 있도록 하였다. 언어의 이론적인 설계에 그치지 않고 설계된 언어를 수행할 수 있는 실행 시간 지원 시스템을 구현하였다. 실행 시간 지원 시스템은 언어를 해석하고 실행하는 코드 해석기와 이동 코드를 지원하는 네트워크 감독으로 구성되며 설계된 언어를 사용하여 실제로 네트워크 응용 프로그램을 작성하고 테스트 해 볼 수 있다.Abstract Some studies bring up a concept of code mobility as an innovative way to access network resources in order to develop distributed systems working on a large scale network. After that, many languages are suggested to support this concept. In these languages, language constructors for their particular application domains and mobile codes provide both problem-oriented views to the programmer and reasonable performance to the system. In this thesis, we extend the client-server model that is the most popular model in developing distributed systems these days. We propose a model to have another method to access server's resources and extend the C language to implement the proposed model for the large scale network. The new language has capability to build a software working on a large scale network by supporting mobile code and gives a consistent network programming view to the programmer by adapting distributed semantics. The language also makes network programming easy by providing network primitives at the language level. We implement a prototype of run-time system to support this language. The run-time system is composed of two major parts: code-interpreter that interprets and executes the language and network-daemon that supports mobile codes.

Lessons from Haitai Distribution Inc's experience in Korea

  • Cho, Young-Sang
    • Journal of Distribution Science
    • /
    • v.9 no.3
    • /
    • pp.25-36
    • /
    • 2011
  • Owing to the rapid growth of hypermarket/discount store formats since 1996, Korean retailing has suddenly attracted the significant attention from researchers. Before the emergence of large scale retailers such as E-Mart, Lotte Mart and Tesco Korea, there were the two retail formats who led the Korean retailing in the modern retailing history: department store and supermarket formats. Nevertheless, there has been little literature concerned about the two retail formats as a case study, while some authors have paid their attention to hypermarket/discount store formats. In addition, when mentioning the development process of retailing history, it is less likely that authors have made an effort to illustrate supermarket retailing history. In order to regard supermarket retailing as part of the Korean retailing, it is interesting to look at a representative supermarket retailer, Haitai, who was one of the subsidiaries of Haitai chaebol. Based on supermarket retailing, the company which was established as a joint venture in 1974 led a supermarket retailing in the Korean modernised retailing history. Before analysing whether Haitai failed or not, the definition of failure should be illustrated. With regard to the term, failure, in the academic world, authors have interchangeably used the following terms: failure, divestment, closure, organisational restructuring, and exit. To collect research data as a case study, the author adopted an in-depth interview method. The research is based on research interviews with 13 ex-staff who left after Haitai went bankruptcy, from store management department to merchandise department. By investigating Haitai's experiences through field interviews, the research found that Haitai restructured organisational decision-making process at the early stage when companies started to modernise organisational charts, benchmarking sophisticated retailing knowledge through the strategic alliance with a Japanese retailer. In respect of buying system, the company established firmly buying functions by adopting central buying system, and further, outstandingly allocated considerable marketing resources to the development of retailer brands with the dedicated team of retailer brand development. In the grocery retailing, abandoning a 'no-frill' packaging concept, the introduction of retailer brand packaging equal to, or better than national brand packaging design, encouraged other retailers to change their retailer brand development strategies. In product sourcing ways, Haitai organised for the first time the overseas sourcing team with the aim of improving the profit margins of foreign products and providing exotic products for customers, followed by other retailers. Regarding distribution system, the company introduced the innovative idea which delivered products ordered by stores directly to each store withboth its own vehicles and its own warehouse in which could deal with dry foods, chilly foods, frozen food, and non-foods, and even, process produce. In addition, Haitai developed many promotional methods to attract more customers like 'the guarantee of the lowest price', and expanded its own business to US in 1996, although withdrew, because of bankruptcy in 1997. Together with POS introduction in 1994, Haitai made a significant contribution to the development of the Korean retailing, influencing other retailers in many aspects. As a case study, the study has provided a number of lessons from Haitai's experiences for academicians and practitioners, suggesting that its history should be involved in the Korean modernised retailing.

  • PDF

Analysis of School Space for Students' Customized Classes: Focused on Vittra Telefonplan School in Sweden (학생 맞춤형 수업을 위한 학교 공간 분석: 스웨덴 비트라 텔레폰플랜(Vittra Telefonplan) 학교를 중심으로)

  • Shin, Jin-Su;Jo, Hyang-Mi
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.10
    • /
    • pp.433-445
    • /
    • 2019
  • This study was designed to create an innovative Korean school space plan. This was done by performing an analysis of cases of student-tailored class operations and the composition of school space in Sweden's Vittra Telefonplan School. To this end, the research team analyzed prior studies, the Vittra school space and the student-tailored classes through an analysis of the literature, documents and video images. First, the OpenSpace was operating classes tailored to each student's academic growth and needs. Second, the open-space school space played a role as the space for student life. Third, the teacher played a role as an active guide and facilitator of students. Forth, the students' individual learning management team actively conducted coding classes by utilizing IT-based learning platforms. The implications of the Vittra School are as follows. When designing a new school, it is recommended to design a small school as small as possible, organize an open space according to the grade and not by the class, and operate the curriculum around the students' grade. When reorganizing existing schools, it is proposed that standardized classrooms be modified for schools with spare classrooms to create learning spaces that can vary for large to small and to practice project-oriented classes at the grade level.

A Study on the Effects of National Technical Qualification System Innovation on Companies' Decision on Employment: Focused on Course-base Qualification (국가기술자격제도의 혁신이 기업의 고용결정에 미치는 영향에 관한 연구: 과정평가형 자격을 중심으로)

  • Jang, Seok-Keun;Bong, Kang Ho;Park, Jaemin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.11
    • /
    • pp.278-286
    • /
    • 2018
  • The existing test-based qualification system does not sufficiently reflect the demand for skills in industries and there exist concerns regarding its efficacy. In response, an innovative national technical qualification system, which uses a course-based qualification system, has been introduced to supplement the test-type qualification system. This study investigates the impact of the national technical qualification system on companies' decisions concerning employment by analyzing survey data from companies that employed persons who obtained course-based qualifications. Analysis results found the degree of company demand for skills had a positive impact on overall employment decisions. Especially, it was highly likely for those companies that experienced loss due to the lack of technology in the past to decide continued employment and expansion of employment. This suggests that it is necessary to design the national technical qualification system in response to the demand for technological skills of each industry in the future.

Three Dimensional Printing Technique and Its Application to Bone Tumor Surgery (3차원 프린팅 기술과 이를 활용한 골종양 수술)

  • Kang, Hyun Guy;Park, Jong Woong;Park, Dae Woo
    • Journal of the Korean Orthopaedic Association
    • /
    • v.53 no.6
    • /
    • pp.466-477
    • /
    • 2018
  • Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.