• Title/Summary/Keyword: inner P control

Search Result 171, Processing Time 0.024 seconds

The Comparison of the Effects on the Regeneration with Xenografts on the Furcation Involvement in Beagle Dogs (성견 치근 이개부 병소에서 이종골 이식재의 치주조직 재생에 미치는 영향에 대한 비교 연구)

  • Cho, Jin-Sang;Kim, Jong-Yeo;Chung, Chin-Hyung;Yim, Sung-Bin
    • Journal of Periodontal and Implant Science
    • /
    • v.30 no.2
    • /
    • pp.277-287
    • /
    • 2000
  • For the regeneration of osseous defect on the furcation area, autogeneous bone graft has been primarily used. But it has the limitation of donor site, additive surgical operation etc. Recently anorganic xenogenic bone graft materials of removing all organic components are commonly used for the regeneration of periodontal defects. This study was the comparison of the effect on the regeneration with two types xenografts($Bio-oss^{(R)}$ and Ca-P thin coated Bovine bone powder) on the furcation involvement in Beagle dogs. After surgically induced chronic periodontitis in bifurcation area of premolar, $Bio-oss^{(R)}$ and Ca-P BBP were grafted on the osseous defects. Tissue blocks including defects with soft tissues were harvested following a four-& eight-week healing interval and prepared for histologic analysis. The results of this study were as follows: 1. $Bio-oss^{(R)}$ group: there were significant differences among the $Bio-oss^{?}$ group at 4weeks and 8weeks, but the control group had various appearances : new bone formation, resorption of graft materials by multinuclear giant cells, connective tissue cells intervention in the bone graft sites etc. 2. Ca-P BBP group: lots of new bone formation were observed but the arrangement of periodontal ligament was not completed at 4weeks. New bone were replaced mature bone and the periodontal ligaments showed the functional arrangement at 8weeks. 3. By reason of undergrowing the epithelium within the osseous defects, new bone formation was not happened in the upper area of bifurcation in $Bio-oss^{(R)}$ group. 4. In Ca-P BBP group, epithelial undergrowth was not seen and generally showed much more new bone formation. 5. Ca-P BBP group showed the osteocyte-like cells at the inner portion of the graft materials 6. Both groups were similar to resorptive appearances of graft materials, but Ca-P BBP group had the better effects of osteoconduction.

  • PDF

Effect of the Concentration of Ammonia in Maturation Medium on the Development and Cell Numbers of Korean Native Cow Embryos (한우 난포란의 체외성숙 배지 내의 암모니아 농도가 배 발생과 세포수에 미치는 영향)

  • Park Y. S.;Park H. D.
    • Reproductive and Developmental Biology
    • /
    • v.29 no.1
    • /
    • pp.31-36
    • /
    • 2005
  • The purpose of this study was an improvement of efficiency and quality in the production of Korean Native Cow embryos. We investigated effects of concentration of ammonia in in vitro maturation (IVM) medium. In addition, we examined effects of addition or exchange of IVM medium on subsequent development and the cell numbers of blastocysts. The concentrations of ammonia in IVM medium was significantly increased by the increasement of IVM duration (p<0.05). The development rates to the 2 cell-, 8 cell- and blastocyst-stage embryos with the addition of IVM medium were similar among treatment groups. The number of inner cell mass (ICM) cells and the total cell number (TCN) of blastocysts were not differ among treatment groups, whereas the trophectoderm (TE) cell number was significantly lower in the group of 4.5 h addition. The ICM/TCN ratio was significantly higher in the group of 4.5 h addition than in the group of control and 9 h addition. The development rate to the 2-cell embryo with the exchange of IVM medium was significantly higher in the group of 4.5 h exchange and 9 h exchange than in control. The development rate to the blastocyst stage was the highest in the group of 9 h exchange. The number of ICM and ICM/TCN ratio were significantly higher in the group of 9 h exchange than the other groups. The numbers of TE and TCN was similar among treatment groups.

Disinfection Efficiency of Silver Disinfectants for Biofilm (은 화합물을 이용한 생물막 제어)

  • Kim, Jae-Eun;Kim, Jee-Yeon;Yoon, Je-Yong
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.28 no.1
    • /
    • pp.81-87
    • /
    • 2006
  • The industrial systems contain many sites and components susceptible to biofilms formation. Biofilms play an important role in microbial growth and industrial fouling. Thus, the control of the biofilms in industrial systems has been emphasized, however, the efficient controlling method was not provided yet. Since silver compounds have no residual and corrosion problem, the interest for silver compounds as a biofilm control disinfectant has been increased. In this study, we attempted to examine the disinfection ability of silver compounds. The disinfection efficiency of two silver compounds(silver ion and silver oxide) were evaluated for biofilms in comparison with suspended cells using well known indicator microorganisms(E. coli, P. aeruginosa) and compared with that of chlorine. Silver compounds were found to be effective in inactivating E. coli and P. aeruginosa biofilms. The reason for superiority of silver compounds as biofilm disinfectant was suggested by that silver can penetrate into the inner biofilm matrix faster than chlorine without consumption. This study reports that the disinfectant which is highly effective in inactivating the suspended cells in water becomes the less effective for controlling biofilm because of its high reactivity. This results imply that the effective strategy for biofilm control can be achieved by considering thoroughly the chemical nature of disinfects and biofilm structure and the reactivity between them.

Sows fed with synergistic blend of short- and medium chain organic acid has a carryover effect on post-weaning growth rate

  • Sampath, Vetriselvi;Park, Jae Hong;Pineda, Lane;Han, Yanming;Cho, Sungbo;Kim, In Ho
    • Journal of Animal Science and Technology
    • /
    • v.64 no.2
    • /
    • pp.302-311
    • /
    • 2022
  • This study investigated the effect of a synergistic blend of free and buffered organic acid (FMP) on the performance of piglets born to sows supplemented with a blend of short- and medium-chain organic acids (SGG) during the late gestation and lactation period. A total of 150 multiparous sows (n = 50/treatment, Landrace × Yorkshire) were blocked (2.4 parity) and assigned to 1 of 3 dietary treatments: CON - corn-soybean meal-based basal diet, SGG-Low - CON+ 1.5 kg/ton SGG, and SGG-High - CON + 3kg/ton SGG. During weaning, 600 piglets (6.72 ± 0.5kg) which weaned from sows supplemented with 3 levels of SGG were allocated to 2 weaner diets (Control and FMP - 3kg/ton) following 3 × 2 factorial arrangement. Supplemental effects on performance were measured at d0-d21 and d 21-42, and the entire period. Pigs fed with FMP and born to sows supplemented with SGG-High gained more weight and ate more (p < 0.05) compared with those in the CON group in both phases, and with SGG-Low in the second phase. Over the entire post-weaning period, piglets born to sows supplemented with SGG-Low and SGG-High had a higher average daily gain (ADG) and body weight (BW) (p < 0.05). Regardless of sow treatment, pigs fed with an FMP diet had higher ADG (p < 0.001), BW (p = 0.045), and a lower feed conversion ratio (p = 0.033). Also, feeding FMP diets reduced the fecal Escherichia coli and Clostridium perfringens counts at d42. The current study indicates that sows fed SGG supplement had a positive carry-over effect on the post-weaning growth rate, and FMP supplement enhances the growth performance and reduced the number of C. perfringens and E. coli. Thus, the application of 3 kg/ton of SGG in sows' diet and subsequent feeding of piglets with FMP would be an effective strategy to improve growth rate and reduce pathogenic bacteria in post-weaned piglets.

Environmental Prediction in Greenhouse According to Modified Greenhouse Structure and Heat Exchanger Location for Efficient Thermal Energy Management (효율적인 열에너지 관리를 위한 온실 형상 및 열 교환 장치 위치 개선에 따른 온실 내부 환경 예측)

  • Jeong, In Seon;Lee, Chung Geon;Cho, La Hoon;Park, Sun Yong;Kim, Seok Jun;Kim, Dae Hyun;Oh, Jae-Heun
    • Journal of Bio-Environment Control
    • /
    • v.30 no.4
    • /
    • pp.278-286
    • /
    • 2021
  • In this study, based on the Computational Fluid Dynamics (CFD) simulation model developed through previous study, inner environmenct of the modified glass greenhouse was predicted. Also, suggested the optimal shape of the greenhouse and location of the heat exchangers for heat energy management of the greenhouse using the developed model. For efficient heating energy management, the glass greenhouse was modified by changing the cross-section design and the location of the heat exchanger. The optimal cross-section design was selected based on the cross-section design standard of Republic of Korea's glass greenhouse, and the Fan Coil Unit(FCU) and the radiating pipe were re-positioned based on "Standard of greenhouse environment design" to enhance energy saving efficiency. The simulation analysis was performed to predict the inner temperature distribution and heat transfer with the modified greenhouse structure using the developed inner environment prediction model. As a result of simulation, the mean temperature and uniformity of the modified greenhouse were 0.65℃, 0.75%p higher than those of the control greenhouse, respectively. Also, the maximum deviation decreased by an average of 0.25℃. And the mean age of air was 18 sec. lower than that of the control greenhouse. It was confirmed that efficient heating energy management was possible in the modified greenhouse, when considered the temperature uniformity and the ventilation performance.

Islet function within a multilayer microcapsule and efficacy of angiogenic protein delivery in an omentum pouch graft

  • McQuilling, J.P.;Pareta, R.;Sivanandane, S.;Khanna, O.;Jiang, B.;Brey, E.M.;Orlando, G.;Farney, A.C.;Opara, E.C.
    • Biomaterials and Biomechanics in Bioengineering
    • /
    • v.1 no.1
    • /
    • pp.27-39
    • /
    • 2014
  • We have previously described a new multilayer alginate microcapsule system, and the goals of the present study were to assess the in vitro function of islets encapsulated in its inner layer, and the angiogenic ability of FGF-1 delivered from the external layer in an omentum pouch. Following isolation and culture, islets were encapsulated in the inner core of microspheres ($500-600{\mu}m$ in diameter) with a semi-permeable poly-L-ornithine (PLO) membrane separating two alginate layers, and both unencapsulated and encapsulated islet function was assessed by a dynamic glucose perifusion. For angiogenesis experiments, one group of microcapsules without FGF-1 (control) and another (test) containing FGF-1 with heparin encapsulated in the external layer were made. One hundred microcapsules of each group were transplanted in Lewis rats (n = 5/group) and were retrieved after 14 days for assessment of angiogenesis. Glucose perifusion of unencapsulated and encapsulated islets resulted in similar stimulation indices. The release of FGF-1 resulted in increased vascular density compared to controls. In conclusion, islets encapsulated in the core of multilayer alginate microcapsules maintain functionality and the microcapsule's external layer is effective in delivery of FGF-1 to enhance graft neovascularization in a retrievable omentum pouch.

Effect of 2-butoxyethanol Additive in the Casting Solution on the Characteristics of Nonsolvent Vapor Induced Phase Inversion PES Membranes (비용매증기 유발 상 전이 공정을 이용한 PES 멤브레인 제조에 있어 2-butoxyethanol 첨가 효과)

  • Kim, No-Won
    • Membrane Journal
    • /
    • v.20 no.1
    • /
    • pp.76-86
    • /
    • 2010
  • This study investigated the effect of 2-butoxyethanol (BE) as a nonsolvent additive, relative humidity and air contact time on the structure formation of microfiltration membranes, permeation and morphology properties in phase inversion process. The membranes were prepared by using polyethersulfone (PES)/Dimethyl formamide (DMF)/p-toluenesulfonic acid (TSA)/Polyvinylpyrrolidone (PVP)/BE casting solution and water coagulant. Casting solutions containing various concentration of BE were exposed to a water vapor, under 60 and 80% of relative humidity for 40 and 90 sec, which would be absorbed on. The correlations between the membrane permeation properties and surface/inner structures of membrane were investigated. The characterization of membranes was carried out by a capillary flow porometer, a FE-SEM and a water permeation test apparatus. The surface structure of PES membranes was affected by the exposure time as well as the relative humidity strongly. Furthermore, the addition of BE helped control surface and inner structure at certain humidity and exposure time.

Design of a Transformable Track Mechanism for Wall Climbing Robots (변형 트랙 메커니즘을 이용한 등반로봇 설계)

  • Lee, Gi-Uk;Seo, Kun-Chan;Kim, Hwang;Kim, Sun-Ho;Jeon, Dong-Su;Kim, Hong-Seok;Kim, Jong-Won
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.29 no.2
    • /
    • pp.178-184
    • /
    • 2012
  • This paper presents a transformable track mechanism for wall climbing robots. The proposed mechanism allows a wall climbing robot to go over obstacles by transforming the track shape, and also increases contact area between track and wall surface for safe attachment. The track mechanism is realized using a timing belt track with one driving actuator. The inner frame of the track consists of serially connected 5R-joints and 1P-joint, and all joints of the inner frame are passively operated by springs, so the mechanism does not require any actuators and complex control algorithms to change its shape. Static analysis is carried out to determine design parameters which enable $90^{\circ}$ wall-to-wall transition and driving over projected obstacles on wall surfaces. A Prototype is manufactured using the transformable track on which polymer magnets are installed for adhesion force. The size of the prototype is $628mm{\times}200mm{\times}150mm$ ($Length{\times}Width{\times}Height$) and weight is 4kgf. Experiments are performed to verify its climbing capability focusing on $90^{\circ}$ wall to wall transition and driving over projected obstacle.

Effect of Houttuynia cordata Thunb. Powder on the Quality Characteristics of Bread (어성초 분말을 첨가한 식빵의 품질 특성)

  • Park, La-Young
    • Korean Journal of Food Science and Technology
    • /
    • v.47 no.1
    • /
    • pp.75-80
    • /
    • 2015
  • This study was carried out to investigate the quality characteristics of bread containing Houttuynia cordata Thunb. powder (HTP; in ratios of 0, 0.3, 0.5 and 1.0% of the total flour). We found that addition of HTP decreased the pH of dough, whereas the pH of bread remained unchanged. HTP caused no significant change in dough volume during fermentation. Baking loss did not show significant difference between HTP containing bread and control. However, we found changes in bread volume with the most pronounced decrease observed in bread containing 0.1% HTP. Lightness and redness of the inner crumb were decreased by the addition of HTP, whereas yellowness was increased. 2,2-diphenyl-1-picrylhydrazyl-radical scavenging activity and total polyphenol contents were increased significantly by the addition of HTP. The overall acceptability of bread containing 0.5% HTP was better than that of control.

Effects of Melatonin on Gene Expression of IVM/IVF Porcine Embryos

  • Jang, H.Y.;Kong, H.S.;Choi, K.D.;Jeon, G.J.;Yang, B.K.;Lee, C.K.;Lee, H.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.18 no.1
    • /
    • pp.17-21
    • /
    • 2005
  • The effect of melatonin on in vitro embryo development and the expression of antioxidant enzyme gene in preimplantation porcine embryos was determined by modified semi-quantitative single cell RT-PCR. Porcine embryos derived from in vitro maturation /in vitro fertilization were cultured in 5% $CO_2$ and 20% $O_2$ at $37^{\circ}C$ in NCSU23 medium. Melatonin was added to medium at concentration of 1nM, 5 nM, and 10 nM. When treated with 1nM (39.0%) of melatonin, the developmental rate of embryos beyond the morula stage were higher than that of control group (31.0%) (p<0.05). Number of inner cell mass and tropectoderm cell in control (23.0${\pm}$0.5 and 17.3${\pm}$0.8), 1 nM (23.6${\pm}$0.6 and 19.0${\pm}$0.5), and 5 nM (23.3${\pm}$1.1 and 16.3${\pm}$0.8) treated with melatonin were higher than in 10 nM (20.0${\pm}$0.5 and 13.3${\pm}$0.8) treated with melatonin (p<0.05). To develop an mRNA phenotypic map for the expression of catalase, bax and caspase-3, single cell RT-PCR analysis were carried out in porcine IVM/IVF embryo. Catalase was detected in 0, 1 and 5 nM supplemented with melatonin, but bax and caspase-3 were detected in 10 nM treated with melatonin.