• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.89-100
• /
• 2003

We have reviewed the method for surface tension of printing inks. Most of the methods fir for the low viscosity inks and solvents for inks. However, the inks for the offset lithography and intaglio should have high viscosity and high tack. The elongation of the ink filaments has more effect on the measuring surface tension than the energy of the surface molecules. In this paper, we propose the elongation method to estimate the surface tension of high viscosity printing inks. Even though we could measure the surface tension for low viscosity inks such as gravure and screen, elongation method could more useful to estimate the surface tension of lithography and intaglio inks than any other methods.

• 분석과학
• /
• 제17권4호
• /
• pp.315-321
• /
• 2004

The aim of this study was to investigate the evidential value of blue and black ballpoint pens on paper by nondestructive techniques. In this work, 21 blue and 22 black ballpoint pens which were purchased on different brands were analyzed by Raman Spectroscopy and Video Spectral Comparator (VSC). Surface-Enhanced Resonance Raman Spectroscopy (SERRS) with excitation at 685 nm and VSC with several spot light filters were used for the discrimination of ballpoint pen inks. In the SERR spectra, the ballpoint pen inks on paper could be shown sharp spectral bands and distinguished by their band shapes and relative intensities. In the blue and black ballpoint pen inks, the discriminating powers (DP) by SERRS were 0.85 and 0.67 and the DP by VSC were 0.88 and 0.90, respectively. The DP by combined sequence of techniques was all 0.97 in both black and blue ballpoint pen inks.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.45-59
• /
• 2011

According as gradually increasing the demand for Eco-friendly products it has been progressed fairly development at a field of printing and printing inks. The Inks are used by soy oil beginning of ink industry for preventing environment. Now it is possible to make Eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents for preventing environment. But There is some problems if using vegetable ester to inks. Vegetable ester has high solubility, it causes misting and low viscosity of the Inks. So resin is required high performance. Thus, in this paper, I studied about the properties variation of the Varnish and inks According to using the phenolic modified rosin ester and Soy oil Methyl esters. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• 한국인쇄학회지
• /
• 제26권2호
• /
• pp.1-13
• /
• 2008

Printed mottle of coated paper is one of the most common phenomenon and the most difficult problem in offset printing. Offset printing is processed mainly processed by the attractive properties between water and oil, so all inks for off-printing must work with dampening solution(water). It may cause the emulsion on the printing nip from the printing pressure. This study aimed to investigate the effect of emulsified inks on print mottle from emulsified cyan ink by force with each different IP A contents. We measured the print mottle by densitometer and image analysis method. The emulsified inks also give effect to now properties of inks and it caused more ink transfer rate, however, it caused low density of inks. Moreover the emulsified inks were spreaded to around of dots and cause the thinning density on the non-printing area like print mottle. The results showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. So we could find out the obvious effect of emulsified inks to print mottle.

• 분석과학
• /
• 제17권3호
• /
• pp.271-277
• /
• 2004

The aim of this study was to investigate questioned documents written with blue or black ballpoint pen on paper by nondestructive technique. In this work, 21 blue and 22 black ballpoint pen inks which were purchased on different brands were analyzed by using Microspectrophotometry (MSP). The reflectance spectra were obtained from these ink samples and their shapes and the wavelength of the maximum intensity were compared. In the blue and black ballpoint pen inks, the discriminating powers (DP) were 0.85 and 0.61, respectively. The changes of the reflectance intensity at their wavelength of maximum intensity and their shapes appeared according to the exposure time to sunshine in a laboratory, especially in the blue ballpoint pen inks. Therefore it is possible to distinguish ink entries on the same paper with the relative age in case of questioned letters written with blue ballpoint pen.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.63.1-63.1
• /
• 2012

In recent years, the functional inks for printed electronics that can be combined with a variety of printing techniques have attracted increasingly significant interest for use in low cost, large area, high performance integrated electronics and microelectronics. In particular, the development of solution-processable conductor, semiconductor and insulator materials is of great importance as such materials have decisive impacts on the electrical performance of various electronic devices, and, therefore, need to meet various requirements including solution processability, high electrical performance, and environmental stability. Semiconductor inks such as IGO, CIGS are synthesized by chemical solution method and microwave reaction method for TFT and solar cell application. Fine circuit pattern with high conductivity, which is valuable for flexible electrode for PCB and TSP devices, can be printed with highly concentrated and stabilized conductor inks such as silver and copper. Solution processed insulator such as polyimide derivatives can be use to all printed TFT device. Our research results of functional inks for printed electronics provide a recent trends and issues on this area.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.97-103
• /
• 2008

In this investigation, conductivity of conductive inks was measured. A particular attention has been given to the effect of metal powders with various conductivity on the overall conductivity of the bulk ink. The conductivity of various solutions simulating conductive inks consisting of copper and silver was measured and the results have been discussed in relation to various applications of conductive inks in practice. A conductivity model simulating systems consisting of various materials has been introduced and the results were discussed. Materials of good conductivity are adversely affected by mixing with materials of poor conductivity simply through serial connection. However, parallel connection has rather little effect on the overall conductivity. The practical implication of various mixtures of materials on conductive inks has been discussed.

• 한국인쇄학회지
• /
• 제30권1호
• /
• pp.1-19
• /
• 2012

According as gradually increasing the demand for eco-friendly at the printing process, it has been progressed fairly development. Especially, the inks are used by soy oil beginning of ink industry for preventing environment, it is possible to make eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents at all for preventing environment. These eco-friendly inks have a benefits they are able to use the renewable resource. But basically vegetable oils have that reduce the VOC(Volatile Organic Compound) and high viscosity, high solubility properties. So if the vegetable oils use in the ink, set off problem occur on the paper because of slow drying time. In case of vegetable ester, it has similar the molecular weight and kinetic viscosity with hydrocarbon solvent, it is able to control the power of dilution about the resin. So, it has benefit that solve the problem of the existing eco-friendly inks. In this study, different types of ester were made by six types of vegetable oils and used ester in the varnishes and inks properties are comparison with hydrocarbon solvent based ink. By considering the intrinsic properties of vegetable oil, ester used to analyze the changes in ink properties, using ester varnish is applied to study the rheology characteristics and emulsification with inks.

• 분석과학
• /
• 제23권4호
• /
• pp.414-422
• /
• 2010

의문문서의 감정영역에서는 잉크 구성성분의 조성 특성의 비교와 분류를 통하여 식별이 이루어진다. 잉크 분석은 TLC, HPLC/MS, GC/MS, LDI/MS를 이용한 조성분석으로 문서위 기재된 잉크의 조성과 변화에 근거하여 개별 특이성을 확인한다. 본 실험은 잉크 조성 특성 중 휘발성 성분을 확인하고자 5개국에서 생산된 검은색 볼펜잉크 56종을 수집하고 HS-SPME GC/MS를 이용하여 ethylbenzene $0.089\sim0.244\;{\mu}g$/mL, o-xylene $0.072\sim0.331\;{\mu}g$/mL, m,p-xylene $0.062\sim0.318\;{\mu}g$/mL, benzene $0.003\sim0.173\;{\mu}g$/mL, 1,1-dichloroethylene $0.003\sim0.295\;{\mu}g$/mL, toluene $0.007\sim0.484\;{\mu}g$/mL와 같은 휘발성 성분특성 자료를 확보하였으며 잉크시료 개체 특이성과 군집성을 바탕으로 식별자료로 활용할 수 있슴을 알 수 있었다.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.31-37
• /
• 2007

Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for off-printing must work with dampening solution(water). The dampening water may cause the emulsification of ink by the printing pressure in the printing nip. This study aimed to investigate the effect of emulsified inks on print mottle. The cyan ink was emulsified artificially with the different IPA(isopropyl alcohol) content in this study. We evaluated the print mottle by densitometer and image analysis method. The print mottle phenomenon was directly affected by IPA content. The emulsification of inks also had an influence on flow properties of inks and it increased ink transfer rate. It, however, caused low ink density. Moreover the emulsified inks were spreaded to around dots and cause the thinning density on the non-printing area like print mottle. The trial printing showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. We could, therefore, find out the obvious effect of emulsified inks on print mottle.