• 펄프종이기술
• /
• 제30권3호
• /
• pp.74-83
• /
• 1998

The phenomenon of decrease in sizing efficiency when the stock temperature is increased is well recognized as summer sizing, and this is believed to be caused by uneven distribution of sizing agents on paper surface most often incurred by coagulation of sizing agents. When unevenly sized paper is used as coating base stock, nonuniform consolidation of the coating layer may result, which, in turn, causes uneven distribution of binder on coating surface. This causes nonuniform ink absorption to produce print mottle. In this study the effects of simple or polymeric electrolytes, storage temperature and time on the coagulation of cationic dispersed rosin size were investigated using a turbidity measurement method which was verified to correlate well with the particle size of rosin emulsion or its coagulates. Handsheets sized with rosin dispersions coagulated under various conditions were prepared and their sizing degree and coated paper properties including gloss and ink density were examined. The relationship between the sizing nonuniformity of coated papers and its ink absorption property was evaluated. Turbidity of rosin emulsion increased as the storage temperature and time were increased. Addition of simple or polymeric electrolytes caused reduction in $zeta$ -potential of the rosin dispersion and accelerated the coagulation tendency substantially. Reversion of the $zeta$ -potential of rosin dispersion, however, did not occur when coagulation was induced with simple electrolytes. On the other hand, addition of an anionic polyelectrolyte reversed the $zeta$ -potential of the flocculated rosin dispersion. This indicated that electrical double layer compaction and bridging flocculation were coagulation mechanisms for simple and polymeric electrolytes, respectively. Sizing degree decreased as coagulation of rosin was increased. Paper gloss, ink gloss and ink density were increased when sizing degree of base stock was increased most probably due to prevention of base paper swelling and increased binder migration to coating surface. This suggested that uneven printing ink density occurred when uneven sizing development was induced by coagulation of rosin particles.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.91-98
• /
• 2012

This study was carried out in order to evaluate the effects of ultra fine precipitated calcium carbonate (UFPCC) on properties of coating color, coated paper and off-set printability. It was found that blending of UFPCC increased the low-shear viscosity and water retention of coating color. The smaller the particle size, the more significant the effect of it. When the blending ratio of UFPCC was increased, brightness, whiteness and opacity of the coated paper were improved, while paper gloss was decreased due to the increase in roughness. When the UFPCC with the average particle size of $0.12{\mu}m$ was used, the ink receptivity during off-set printing was improved while print gloss was maintained or a little decreased. It was also observed that the dry-pick and wet-pick strength of coated paper were improved by the use of UFPCC. In conclusion, it is possible to produce the low gloss matt paper with the use of UFPCC since it could improve the optical properties and ink receptivity of coated paper.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.53-61
• /
• 2001

This study was carried out to evaluate the effect of coating pigments on the printability by investigating the pore structure of casting layer such as the number, size and distribution of pores and the pore rate. The coating structure was mainly determined by the interaction between pigment and binder. It means that the structure of pores was chiefly affected by the shape and size distribution of pigments and their packing rate. The physical properties of pore have close relationships with ink set-off, the speed of ink penetration and printing gloss. The results suggested that the rate and number of pores were greatly affected by the particle size distribution and shape of pigments. The rate of pore increased with the reduction of particle size distribution of pigments. Calcite was effective to improve greatly the printability of coated paper.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.13-22
• /
• 2006

We investigated the effects of the enzyme treatment of fiber for printability of coated paper. The results could summarized as follows, 1. The samples with enzyme treatment (average 87.8%) have higher ink gloss than the blank (85.6%). Printed density showed same trends with the ink gloss. However, the ${\beta}$-Glucosidase treated sample showed the lowest printed density (2.14 %) due to the lowest thickness of the ink layer, which is influenced by coated weight and surface smoothness. 2. The samples whose base paper was Xylanase and ${\beta}$-Glucosidase treated showed higher surface strength (4.2% and 4.0%, respectively) than the blank while the samples with the Hernicellulase and ${\beta}$-Glucuronidase treatment showed lower surface strength (3.2%and 3.7%, respectively) due to the influence of air permeability. 3. Hemicellulase and ${\beta}$-Glucuronidase treated base paper, which have relatively low air permeability, showed better ink repellence (4.3 and 4.4 %, respectively) than the blank (3.8 %). 4. The blank and the Xylanase treated base paper showed high set-off, which is the last category of printability.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2007년도 추계 학술논문 발표회
• /
• pp.1-12
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were mesured in order to examine the printability of ink.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.1-12
• /
• 2004

In lithography based on repulsion of ink and water emulsification is inevitably generated. Thus it is necessary to analyze relationship between printability and physical and chemical properties of emulsified ink. Transfer rate of ink is one of the important factor deciding print quality. And it is closely concerned with rheological properties of emulsified ink. Rheological properties such as flow, yield, plastic viscosity, creep, oscillation and tack tests were measured. In order to examine printability of emulsified ink, ink transfer equations, density, ink film thickness and gloss were measured.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.1-13
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were measured in order to examine the printability of ink.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.13-27
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printablility of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular weight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.7-16
• /
• 1999

The aim of this research was to evaluate the influences of coating components and structures on ink absorbency. The ink absorbency was measured as porosity, K&N ink absorption, gloss and ink set-off. In order to obtain the relationship between the coating structure and the ink absorbency, the binder level was adjusted and two types of pigments were examined. One of the pigments was known to make the porous coating structure and the other one had strong ink affinity. The effects of coating components were studied by applying six different types of latex and various additives . In this research, CLC(cylindrical laboratory coater) and Prufbau printability tester were used. It was found that the decreasing latex dosage and introducing porous pigment were effective solutions to increase ink absorbency. However, the ink absorbency could not be improved by applying the fine pigment even though it had strong ink affinity. Among the characters of the latex, particle size and surface tension were found to have the strong effect on ink absorbency. The ink absorbency increased with large particle size and low surface tension latex. The additives were varied and it was found that applying to the top coating was effective.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.26-34
• /
• 1999

This paper was intended to find out the relationship between optical and interior properties of coated paper and printability with the variation of particle size of ground calcium carbonate(GCC) by using Mercury Porosimeter, and to find out the pore properties of coated paper as well. The viscosity and water retention of coating color was increased and smothness, sheet gloss and porosity of coated paper were improved as the particle size of GCC was decreased. However, there was no difference in opacity and brightness of coated paper. The pore volume of coated paper was decreased, but the number of pores was drastically increased according to the decrease of the particle size of GCC. The weight of ink transferred into coated paper was increased in proportion to pore volume of coated paper. However, the weight of damping water and ink induced toward coated paper was slightly increased. Ink setting was accelerated printing gloss was not changed. Therefore, optical and interior properties of coated paper seemed to be affected by the pore property of coated paper and printability was also affected by it.