• Korean Journal of Poultry Science
• /
• v.44 no.1
• /
• pp.29-39
• /
• 2017

This study examined the effects of adding dried blood mixed with Macsumsuk to the feed of broiler chickens. The blood had been dried at $200^{\circ}C$ in an ultra-high-temperature injection system and mixed in a 70:30 proportion of blood meal to Macsumsuk. The experiment consisted of four treatment groups of 150 chickens each. The control group received common broiler feed only, while treatment groups T1, T2, and T3 received feed supplemented with 0.5, 1.0, and 3.0% of the blood meal/Macsumsuk mixture, respectively. The diets were fed for a total of 35 days. Compared with the controls, body weight gain was improved in groups T1 (1,621 g), T2 (1,749 g), and T3 (1,739 g) (1,621-1,749 g vs. 1,448.5 g, respectively) and feed efficiency increased (p<0.01). The carcass rate in group T3 was higher by 83.26% than that in the controls (75.96 %) (p<0.01). The water holding capacity (WHC) increased in groups T1 and T2 (62.27 and 63.80% respectively) compared with controls (p<0.01). The intestine length was longer in groups T1 and T2 (53.98-55.48) than in controls (45.81) (p<0.01). Adding 0.5-1.0% of the dried blood meal Macsumsuk supplement resulted in a significant reduction in the cholesterol content (39.28~47.34 mg/100 g) compared with the controls (50.44 mg/100 g) (p<0.001); furthermore, the proportions of fatty acids including oleic (C18:1n9), ${\gamma}-linoleic$ (C18:3n6), eicosenoic (C20:1n9), and arachidonic (C20:4n6) acids were significantly increased (p<0.01). Compared with controls, the proportion of unsaturated fatty acids (UFA), mono-unsaturated fatty acids (MUFA), and proportion of UFA / SFA in group T1 was (68.66 vs. 69.35%, 51.22 vs 52.00%, and 2.19 vs. 2.26%, respectively) (p<0.05). However, the amino acid content of cystine and methionine of the treatment group (0.43~0.57%) was significantly higher than that of controls (0.38~0.46%) (p<0.05). Overall, supplementing the feed with 0.5-1.0% of the mixture of blood meal Macsumsuk improved productivity by increasing weight gain and feed efficiency, improved meat quality by increasing the water-holding capacity and levels of unsaturated fatty acids, and improved meat color.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.151-156
• /
• 1984

The Chili fish, one of the most common species of the freshwater fishes, is distributed in the river basins of the western coast of Korea. However, any studies on this fish, especially its development or life history, have not been made so far. The authors, therefore, carried out an experiment to reveal some characteristics of egg develoment and fry in this fish. For accomplshing this study, we caught some adult Chili fish by means of a casting net at raceway in the vicinity of Kunsan in June and July, 1983; then, we injected 0. 1 cc Gonadotrophic hormone 1,000 unit solution (Puberogen) in order to induce the spawning on the abdominal cavity of male and female respectively, Approximately 12 hours after injection, the artificially fertilized eggs by using of the dry method and the naturally fertilized eggs were observed simultaneously in the aquarium ($30{\times}50{\times}70cm$). The fertilized eggs, in spherical shape, were sperative, demersel, adhesive nature and $1.38{\sim}1.59\;mm$ in diameter. The light yellow yolk was opaque and $1.17{\sim}l.27\;mm$ in diameter. The hatching of eggs took place at 29.5 hours after fertilization under the condition of $23.5{\sim}25.0^{\circ}C$ water temperature. Basically there were not found so many different aspects in comparison with the common species of Cyprinidae in the development process of eggs : however, there were a few noticable characteristics, that is, pigment cells, eye balls and blood circulation are invisible, or the velocity of egg development is rapid, seemed similar to the Loach's egg. Newly hatched larvae with the yolk sac (2.39 mm in size) were $3.87{\sim}3.99\;mm$ in total length and their myotome number was expressed as 28+15=43. About 20 hours after hatching, a caudal and a pectoral fin as well as an anus began to orgin. In addition, a few malanophore showed on the upper regin of the yolk sac of the larvae whose size was 4.73 mm in total length. The larvae developed about 5.02 mm in total length, and the median fin fold in the abdomen extended forward to two thirds or beyond of the yolk sac at 50 hours after hatching. Simultaneously, the eye balls and mouth also appeared. After 3 days, the yolk sac nearly disappeared, and the larvae (5.4 mm in total length) with perfect eye balls began to swim for themselves for the first time. Also, the specialization between the gill arches and the ailmentary canal, the development of each fins except dorsal fin as well as the blood circulation obviously distinguished in this stage. The larvae whose total length was 5.68 mm was very brisk: also, the development of the dorsal fin rudiment, nearly perfect formation of each organs and the function of the upper and lower jaws were noticeably observed 5 days after hatching.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Journal of Veterinary Clinics
• /
• v.18 no.3
• /
• pp.249-256
• /
• 2001

This study was performed to evaluate cardiopulmonary depressant effects of enflurane (1.0 vol%) combined with propofol(0.25 mg/kg/min) compared with enflurane inhalation, and propofol infusion, respectively, in 18 healthy dogs premedicated with acepromazine and atropine. After bolus injection of propofol 5 mg/kg for induction and tracheal intubation, they were randomly assigned to 3 groups: propofol 0.5 mg/kg/min infusion (Group I, n=6), enflurane 2.5 vol% (Group II, n=6) and enflurane 1.0 vol% combined with propofol 0.25 mg/kg/min (Group III, n=6). Mean arterial Pressure (MAP), systolic arterial pressure (SAP) and diastolic arterial pressure (DAP) were depressed significantly in all groups, especially in Group II. MAP, SAP and DAP values of Group IIIwere higher than those of Group II, but lower than those of Group I. The changes of PaO$_2$, Pa$CO_2$and pHa were similar in all groups. Respiration rates were decreased in all groups 5 minutes after induction but maintained in normal range. Those of Group I were less depressant than those of Group II and Group III. Concentrations of $Na^+ and Cl^-$ were increased and those of $K^+$ were decreased in all groups, but their values were quitely similar. Heart rate was changed in small range and the value of Group I was higher than those of Group II and Group III. Body temperature was decreased significantly in all groups. Adverse effects like as muscle rigidity, nausea or vomiting and shivering were not appeared and apnea at induction was occured 6 dogs. From the these results, enflurane 1.0 vol% combined with propofol 0.25 mg/kg/min also could be applied for anesthesia in dogs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.10
• /
• pp.1186-1194
• /
• 2017

Recently, many people have demanded reliable nutritional data even for minor-components. On the other hand, an analytical method for the analyses of vitamin $B_5$ and $B_6$ is lacking. Therefore, this study attempted to validate with accuracy and precision the analysis of vitamin $B_5$ and $B_6$ using a high-performance liquid chromatography (HPLC) method. The vitamin $B_5$ and $B_6$ contents were analyzed using an Agilent 1260 series HPLC system. YMC-Pack ODS-AM ($250{\times}4.6mm$ I.D.) and YMC-Pack Pro RS $C_{18}$ ($250{\times}4.6mm$ I.D.) columns were used for the analyses of vitamin $B_5$ and $B_6$, respectively. In the case of vitamin $B_5$, the flow rate was set to 1.0 mL/min by isocratic elution using the 50 mM $KH_2PO_4$ solution (pH 3.5)/acetonitrile (ACN) (95:5, v/v) with monitoring at 200 nm using HPLC/DAD, whereas the flow rate for vitamin $B_6$ was set to 1.0 mL/min of flow rate by isocratic elution using a 20 mM $CH_3CO_2Na$ solution (pH 3.6)/ACN (97:3, v/v) with monitoring by excitation at 290 nm and emission at 396 nm using HPLC/FLD. The column temperature was set to $30^{\circ}C$. The injection volume was $20{\mu}L$ for each experiment. The specificity of the accuracy and precision for vitamin $B_5$ and $B_6$ were also validated by HPLC. The results showed high linearity in the calibration curve for vitamin $B_5$ ($R^2=0.9998^{{\ast}{\ast}}$), the limit of detection (LOD) and limit of quantitation (LOQ) were 0.4 mg/L and 1.3 mg/L, respectively, In contrast, for the calibration curve of vitamin $B_6$, which showed high linearity ($R^2=0.9999^{{\ast}{\ast}}$), the LOD and LOQ were 0.006 mg/L and 0.02 mg/L, respectively.

• Journal of Chest Surgery
• /
• v.31 no.5
• /
• pp.502-508
• /
• 1998

Proinflammatory cytokines such as tumor necrosis factor-$\alpha$(TNF-$\alpha$) have been implicated in myocardial and organ dysfunction associated with postperfusion syndrome. We tested the hypothesis that cytokine productions are depressed by preoperative cortiosteroid injection for cardiopulmonary bypass(CPB) and the postoperative courses will be better than without steriod pretreated cases. Cardiac surgery was performed in randomized blind fashion for 20 patients from June 1996 to September 1996. In the steroid group(n=10), corticosteroid(dexamethasone 1 mg/kg) was injected 1 hour before anesthetic induction, but in the control group(n=10), nothing was injected. Each of groups were sampled 11 times as scheduled for TNF-$\alpha$ bioassays. We have checked EKG, cardiac enzymes(CPK, LDH with isoenzyme), WBC count preoperative day, one day and three days after operation. Viatal signs were continuously monitored for three postoperaive days. In the postoperative period three patients in the control group had elevated body temperature and four patients had hypotension that required considerable intravenous fluid administration. But steroid injected patients showed normal body temperture and acceptable blood pressures without supportive treatment. CPK enzymes rose in control group higher than steroid group at postoperative 1st and 3rd day(CPK; 1122$\pm$465 vs 567$\pm$271, 864$\pm$42 vs 325$\pm$87), and CPK-MB enzymes rose in control group higher than steroid group at postoperative 1st day(106.4$\pm$115.1 vs 29.5$\pm$22.4)(P=0.02). Arterial tumor necrosis factor-$\alpha$ rose during cardiopulmonary bypass, peaking at 5 minutes before the end of aortic cross clamping(ACC-5min) in steroid group(11.9$\pm$4.7 pg/ml), and 5 minutes before the end of cardiopulmonary bypass(CPB-5min) in control group(22.3$\pm$6.8 pg/ml). The steroid pretreated patients had a shorter period of time in respirator suport time, ICU stay day, hospital admission day. We conclude that corticosteroid suppress cytokine production during and after cardiopulmonary bypass, and may improve the postoperative course through inhibition of reperfusion injury such as myocardial stunning and hemodynamic instability.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.1-10
• /
• 2020

Reactivity controlled compression ignition (RCCI) combustion is one of dual-fuel combustion systems which can be constructed by early diesel injection during the compression stroke to improve premixing between diesel and air. As a result, RCCI combustion promises low nitrogen oxides (NOx) and smoke emissions comparing to those of general dual-fuel combustion. For this combustion system, to meet the intensified emission regulations without emission after-treatment systems, exhaust gas recirculation (EGR) is necessary to reduce combustion temperature with lean premixed mixture condition. However, since EGR is supplied from the front of turbocharger system, intake pressure and the amount of fresh air supplementation are decreased as increasing EGR rate. For this reason, the effect of various EGR rates on the brake power and thermal efficiency of natural gas/diesel RCCI combustion under two different operating conditions in a 6 L compression ignition engine. Varying EGR rate would influence on the combustion characteristic and boosting condition simultaneously. For the 1,200/29 kW and 1,800 rpm/(lower than) 90 kW conditions, NOx and smoke emissions were controlled lower than the emission regulation of 'Tier-4 final' and the maximum in-cylinder pressure was 160 bar for the indurance of engine system. The results showed that under 1,200 rpm/29 kW condition, there were no changes in brake power and thermal efficiency. On the other hand, under 1,800 rpm condition, brake power and thermal efficieny were decreased from 90 to 65 kW and from 37 to 33 % respectively, because of deceasing intake pressure (from 2.3 to 1.8 bar). Therefore, it is better to supply EGR from the rear of compressor, i.e. low pressure EGR (LP-EGR) system, comparing to high pressure EGR (HP-EGR) for the improvement of RCCI power and thermal efficiency.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.1
• /
• pp.42-48
• /
• 2007

Purpose: The purpose of this study is to image metastaic lung melanoma model with optimal pre-conditions for animal handling by using $[^{18}F]FDG$ small animal PET and clinical CT. Materials and Methods: The pre-conditions for lung region tumor imaging were 16-22 h fasting and warming temperature at $30^{\circ}C$. Small animal PET image was obtained at 60 min postinjection of 7.4 MBq $[^{18}F]FDG$ and compared pattern of $[^{18}F]FDG$ uptake and glucose standard uptake value (SUVG) of lung region between Ketamine/Xylazine (Ke/Xy) and Isoflurane (Iso) anesthetized group in normal mice. Metastasis tumor mouse model to lung was established by intravenous injection of B16-F10 cells in C57BL/6 mice. In lung metastasis tumor model, $[^{18}F]FDG$ image was obtained and fused with anatomical clinical CT image. Results: Average blood glucose concentration in normal mice were $128.0{\pm}23.87$ and $86.0{\pm}21.65\;mg/dL$ in Ke/Xy group and Iso group, respectively. Ke/Xy group showed 1.5 fold higher blood glucose concentration than Iso group. Lung to Background ratio (L/B) in SUVG image was $8.6{\pm}0.48$ and $12.1{\pm}0.63$ in Ke/Xy group and Iso group, respectively. In tumor detection in lung region, $[^{18}F]FDG$ image of Iso group was better than that of Ke/Xy group, because of high L/B ratio. Metastatic tumor location in $[^{18}F]FDG$ small animal PET image was confirmed by fusion image using clinical CT. Conclusion: Tumor imaging in small animal lung region with $[^{18}F]FDG$ small animal PET should be considered pre-conditions which fasting, warming and an anesthesia during $[^{18}F]FDG$ uptake. Fused imaging with small animal PET and CT image could be useful for the detection of metastatic tumor in lung region.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.