• 대한화학회지
• /
• 제20권2호
• /
• pp.158-165
• /
• 1976

N,N'-Adipyl-bis-${\varepsilon}$-caprolactam을 개시제로 potassium hydroxide를 촉매로 하여 여러 가지 중합조건에서 ${\varepsilon}$-caprolactam의 음이온 중합을 시도하였다. 중합최적조건은 촉매와 개시제의 농도가 각각 4.2와 1.6 mole%, 중합온도 130$^{\circ}C$, 중합시간 1.5시간 일때이었다. 얻어진 중합체의 intrinsic viscosity는 0.9 dl/g, 분자량 12,000이상이었고 융점은 219$^{\circ}C$였다. Acyl type개시제의 반응성은 N,N'-adipyl-bis-${\varepsilon}$-caprolactam이 가장 크고 N-benzoyl-${\varepsilon}$-caprolactam, N-acetyl-${\varepsilon}$-caprolactam의 순서로 감소하였다. Intrinsic viscosity,와 중합변화율은 촉매와 개시제의 농도증가에 따라 증가하였으며 중합온도에 크게 의존하였다.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.189-197
• /
• 1996

In this study, the crashworthiness analysis was carried out for the hat type section side rails which had an important role of absorbing the impact energy during frontal crash. In case of a tapered hat type section model, numerical simulation models and test models were designed with varing design variables; welding pitch, taper angle, initiator shape, initiator location. The effect of variation of the design variables was investigated by quasi-static and dynamic test and numerical simulation.

• 한국추진공학회지
• /
• 제10권4호
• /
• pp.19-25
• /
• 2006

STS 304 발열선과 $Zr-KCIO_4$ 기폭화약을 사용한 전기식 착화기에 대한 열전이 특성을 시험하고 Fitted Wire Model로 분석한 결과, 약 $300^{\circ}C$ 부근에서 기폭화약과 관련된 열전이 특성 파라미터가 급격하게 변화되었다. 이 현상은 기폭화약에 사용된 $KCIO_4$의 상변화로 인한 흡열반응에 의해 발생된 것으로 판단된다.

• Journal of Photoscience
• /
• 제5권2호
• /
• pp.63-67
• /
• 1998

New photoinitiator systems of dimethylphenacylsulfonium butyltnphenylborate (DMPSB) as a donor-acceptor initiator and styryl dyes have been investigated for free radical polymerization of an acrylate with visible lasers (488, 514 and 647 nm). DMPSB was able to be sensitized by many styryl dyes. When polymerized with pentaerythrithol triacrylate, the sensitivity value of the photosensitive layer containing DMPSB was higher than that of an tetrabutylammonium butyltnphenylborate (TBAB) as an electron donating initiator or a dimethylphenacylsulfonium tetrafiuoroborate (DMPS) as an electron accepting initiator. The sensitivity values of the photosensitive layer containing the photoinitiator systems had a close relation to the free energy changes between the excited singlet styryl dyes and DMPSB.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.94-100
• /
• 2004

In order to improve the frontal crash performance of an Aluminum Space Frame Vehicle, this presents a systematic optimal design process to maximize the crush energy absorption capacity of side-members while satisfying the maximum displacement constraint. In this study, five design types are studied for selecting a good collapse initiator. Then, for the selected collapse initiator type, 7 design variables are defined to represent cross section shape, thickness and bead interval. The systematic optimization processor, R-INOPL uses DOE, RSM and numerical optimization techniques. R-INOPL uses only 14 analyses to solve the 7 design variable optimization problem the final design can improve 103.9% of the internal energy and reduce 13.9% of the maximum displacement.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1014-1018
• /
• 2003

A photoalignment material of a PGMAcr, poly[3-(acryloyloxy)-2-hydroxypropyl methacrylate] using a photopolymerized the acrylate unit by photo-initiator and a PGMA4Ch, poly[3(4-chalconyloxy)-2-hydroxypropyl methacrylate] using a photodimerization by chalcone group were synthesized. Also, the liquid crystal (LC) aligning capabilities on the photopolymer layers were studied. A good LC alignment with UV exposure on the PGMAcr surface can be obtained. However, the LC alignment defects were observed on the PGMA4Ch surface. The LC aligning capabilities of the PGMAcr surface by photo-initiator were better than that of the PGMA4Ch surface by chalcone group as photosensitive moiety.

• Elastomers and Composites
• /
• 제33권2호
• /
• pp.110-116
• /
• 1998

A new technology was introduced to the emulsion polymerization. It is the ultrasonic activation method which replaced a chemical initiator and the environmentally benign process. In this study, free radicals were produced by a pulse type ultrasound energy irradiation, then polystyrene latex was polymerized without chemical initiator. With ultrasonic energy density, the degree of polymerization, average molecular weight, and particle size were increased, but the polydispersity index for the molecular weight and the particle size were decreased. The optimum condition of emulsifier concentration and temperature was found to be 1.0 wt.% SDS and $40^{\circ}C$, respectively. As a result, the emulsion polymerization process without chemical initiator was proved to be comparable to common latex properties such as average molecular weight, molecular weight distribution, particle size, etc.

• Macromolecular Research
• /
• 제8권6호
• /
• pp.247-252
• /
• 2000

Suspension polymerizations of styrene were conducted in the aqueous phase with tricalcium phosphate (TCP) as a stabilizer and $\alpha$, $\alpha$'-azobis(isobutyronitrile) (AIBN) as an initiator. Various amounts of initiator and stabilizer were selected and the reaction was carried out at a selected temperature between 60 to 80 $\^{C}$. It was found that the combination of 5 wt% stabilizer and 2.427$\times$10$\^$-3/ mol/L of costabilizer is the minimum amount for suspension polymerization reaction to produce particles in the aqueous phase. Particles were found to be polydisperse in diameter, regardless of reaction conditions. Class transitions were observed to be around 95$\^{C}$, nearly independent of reaction temperature and initiator. Homogenizer was found to be essential in forming particles in the proximity of tens of micrometers in diameter in suspension polymerization with TCP as stabilizer.

• Elastomers and Composites
• /
• 제31권3호
• /
• pp.175-182
• /
• 1996

Polymer latices, prepared from the emulsion polymerization of vinyl monomer compounds, are widely used for many industrial applications. Included among these are uses in paints, adhesives, flocculants, and heavy-duty plastics as well as their original use in synthetic rubber compounds. The emulsion polymerization process with chemical initiator has chemical disadvantage such as removal of initiator which was left after polymerization. In this study, polystyrene latex was prepared by using ultrasonic irradiation which generate the free radical, and then it was analyzed by GPC. Reaction temperature hardly have an effect on average molecular weight. Average molecular weight is increased by increasing amount of surfactant, i.e. SDS, but polydispersity is decreased. After 90 minutes of reaction time, increase and decrease of average molecular weight Is repeated. It is proposed that monodisperse polymer is obtained by controlling ultrasonic irradiation time and surfactant concentration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.312-314
• /
• 2009

We have fabricated pentacene based organic thin film transistors (OTFTs) with formulated poly[4-vinylphenol] (PVP) gate dielectrics. The gate dielectrics is composed of PVP, poly[melamine-coformaldehyde] (PMF) and photo-initiator [1-phenyl-2-hydroxy-2-methylpropane-1-one, Darocur1173]. By adding small amount (1 %) of photo-initiator, the cross-linking temperature is lowered to $115^{\circ}C$, which is lower than general thermal curing reaction temperature of cross-linked PVP (> $180^{\circ}C$). The hysteresis and the leakage current of the OTFTs are also decreased by adding the PMF and the photoinitiator in PVP gate dielectrics.