• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1170-1180
• /
• 2009

Recently this country has carried out the coast reclamation centering on the west and south coast for effective practical use of a country, considering purchase of materials and environmental problem, most reclaiming work is processing to spoil reclamation which is easy to secure the amount of materials. In case of weak ground that is formed by spoil reclamation like this, initial moisture content is high, as slurry state that is rarely revealed ground strength, compressibility and water permeability have been shown nonlinear change by compaction progress. Analysis of weak ground is unreasonable because the existing Terzaghi compaction theory analyzes compaction fixed number to regular invariable number for prediction of compaction state. This study computes the relation with void ratio-effective pressure and void ratio-finite transformation which is the most basic matter to predict finite strain compaction state of the south coast spoil, and analyze the basic feature to predict compaction feature of the south coast spoil reclaimed ground.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.907-914
• /
• 2015

The energetic steam explosion caused by contact between the high temperature molten core and water is one of the phenomena that may threaten the integrity of the containment vessel during severe accidents of light water reactors (LWRs). We examined the dependence of steam explosion loads in a typical reactor cavity geometry on selected model parameters and initial/boundary conditions by using a steam explosion simulation code, JASMINE, developed at Japan Atomic Energy Agency (JAEA). Among the parameters, we put an emphasis on the water pool depth that has significance in terms of accident mitigation strategies including cavity flooding. The results showed a strong correlation between the load and the premixed mass, defined as the mass of the molten material in low void zones (void fraction < 0.75). The jet diameter and velocity that comprise the flow rate were the primary factors to determine the premixed mass and the load. The water pool depth also showed a significant impact. The energy conversion ratio based on the enthalpy in the premixed mass was in a narrow range ~4%. Based on this observation, we proposed a simplified method for evaluation of the steam explosion load. The results showed fair agreement with JASMINE.

• 한국지반환경공학회 논문집
• /
• 제11권12호
• /
• pp.63-74
• /
• 2010

우리나라 서, 남해안은 정규압밀 또는 약간 과압밀된 연약 점토층이 널리 분포하고 있다. 이러한 연약지반의 효율적이고 경제적인 설계와 시공을 위해서는 사전에 지반공학적 및 점토의 물리적 특성을 상세히 파악하는 것이 중요하다. 본 연구에서는 한반도 남해안 광양지역 해성점토에 대하여 자연함수비, 비중, 전체단위중량, 초기간극비, 액성한계, 소성한계, 활성도의 물리적 특성을 파악하고 토질정수간의 물리적 특성의 상관성을 규명하였다. 분석을 위하여 비교적 신뢰성이 크다고 볼 수 있는 대형 항만공사용 최근자료를 수집하여 이용하였다. 상관관계분석에서 선형회귀분석과 비선형회귀분석을 통하여 최적의 값을 도출하였다. 본 분석에 사용된 통계 소프트웨어는 SPSS(Version10.0)을 이용하였다. 분석결과 물리적 토질정수 사이의 선형및 비선형 회귀분석결과 함수비와 초기간극비의 상관성이 가장 큰 것으로 나타났으며 선형 및 누승형 회귀분석에서 동일한 결정계수를 나타내 주고 있다. 기타 다른 정수사이의 상관성은 누승식 및 지수승식 형태의 비선형 회귀분석이 선형회귀분석보다 양호한 상관성을 보여주고 있다.

• 한국지반환경공학회 논문집
• /
• 제9권4호
• /
• pp.37-45
• /
• 2008

우리나라 서, 남해안은 정규압밀 또는 약간 과압밀된 연약 점성토층이 널리 분포하고 있다. 이러한 연약지반의 효율적이고 경제적인 설계와 시공을 위해서는 사전에 공학적 특성을 상세히 파악하는 것이 중요하다. 본 연구에서는 한반도 남해안 해성점토에 대하여 자연함수비, 비중, 전체단위중량, 초기간극비, 액성한계, 소성한계, 활성도의 물리적 특성을 파악하고 토질정수간의 상관성을 규명하였다. 분석을 위하여 비교적 신뢰성이 크다고 볼 수 있는 대형 항만공사용 최근자료를 수집하여 이용하였다. 상관관계분석에서 선형회귀분석과 비선형회귀분석을 통하여 최적의 값을 도출하였다. 본 분석에 사용된 통계 소프트웨어는 SPSS(Version10.0)을 이용하였다. 분석결과 토질정수 사이의 선형및 비선형 회귀분석결과 함수비와 초기간극비의 상관성이 가장 큰 것으로 나타났으며 선형 및 누승형 회귀분석에서 동일한 결정계수를 나타내 주고 있다. 기타 다른 정수사이의 상관성은 누승식 및 지수승식 형태의 비선형 회귀분석이 선형회귀분석보다 양호한 상관성을 보여주고 있다.

• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.537-546
• /
• 2020

Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.17-24
• /
• 2002

본 연구에서는 초음파실험을 통하여 카올린 점토 시료의 초음파 전파 속도와 감쇠특성을 조사하였다. 슬러리 압밀 방법을 이용하여 이산구조와 면모구조를 갖는 두 종류의 카올린 점토를 인공적으로 제작하였다. 초음파를 이용하여 각 구조를 가진 점토의 압축파 속도 및 감쇠 거동을 측정하였다. 측정시 가진 주파수, 시료 길이, 측정 방향 등을 변화시키며 그에 대한 영향을 조사하였다. 실험 결과 전파속도는 같은 압축 응력 조건에서 제작된 본 시료의 경우 미세구조의 영향이 크지 않았으나 감쇠 특성은 미세구조의 영향이 큰 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.207-224
• /
• 2016

Granulated coal ash (GCA), a mixture of the by-product from milling processes with a small amount of cement added, has recently come to be used as a new form of geomaterial. The shear strength and deformation behaviours of GCA are greatly determined by its relative density or void ratio. A series of drained triaxial compression tests were performed on cylindrical specimens of GCA at confining pressures of between 50 kPa and 400 kPa at initial relative densities of 50%, 70% and 80%. Experimental results show that a rise in relative density increases the peak shear strength and intensifies the dilation behaviour. The initial tangent modulus and secant modulus of the stress-strain curve increase with increasing initial relative density, whereas the axial and volumetric strains at failure decrease with level of initial relative density. The stress-dilatancy relationships of GCA at different relative densities and confining pressures display similar tendency. The dilatancy behaviour of GCA is modelled by the Nova rule and the material property N in Nova rule of GCA is much larger than that of natural sand.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.149-158
• /
• 2024

Considering that different boundary conditions can have an important impact on structural vibration characteristics. In this paper, the nonlinear forced vibration behavior of functionally graded material (FGM) doubly curved shells with initial geometric imperfections under different boundary conditions is studied. Considering initial geometric imperfections and von Karman geometric nonlinearity, the nonlinear governing equations of FGM doubly curved shells are derived using Reissner's first order shear deformation (FOSD) theory. Three different boundary conditions of four edges simply supported (SSSS), four edges clamped (CCCC), clamped-clamped-simply-simply (CCSS) were studied, and a system of nonlinear ordinary differential equations was obtained with the help of Galerkin principle. The nonlinear forced vibration response of the FGM doubly curved shell is obtained by using the modified Lindstedt Poincare (MLP) method. The accuracy of this method was verified by comparing it with published literature. Finally, the effects of curvature ratio, power law index, void coefficient, prestress, and initial geometric imperfections on the resonance of FGM doubly curved shells under different boundary conditions are fully discussed. The relevant research results can provide certain guidance for the design and application of doubly curved shell.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.111-122
• /
• 2009

지반에 포함된 입자의 용해작용은 흙의 강도를 저하시키고, 지하구조물의 침하를 발생시킨다. 본 논문에서는 입자용해시 혼합재의 물리적 특성 변화를 조사하고자 하였다. 침하량 측정과 전단파 측정과 같은 거시적 반응을 평가하기 위해, 소금과 모래로 구성된 혼합재를 사용하였다. 또한, 광탄성(photoelastic) 디스크와 얼음 디스크 혼합재를 이용하여 힘 연결고리(force chain), 간극, 접촉점수(coordination number), 그리고 수평력 변화와 같은 미시적 거동을 분석하였다. 소금-모래 혼합재에서 전단파는 압밀셀에 설치된 다단의 벤더 엘리먼트로 측정되었고, 광탄성 디스크-얼음 디스크 혼합재의 역학적 거동은 로드셀과 디지털 이미지를 이용하여 분석되었다. 실험결과, 소금의 용해시 전단파 속도는 초기에는 감소한 후에 증가한 후 일정한 값으로 수렴하였다. 용해가능 입자의 크기가 커질수록 그리고 입자패킹이 불규칙해질수록 입자용해시 수평력의 변화가 더 커지는 것을 알 수 있었다. 용해 후, 간극비는 증가했고, 접촉점수는 감소하였다. 본 연구에서는 힘 연결고리, 간극비, 접촉점수와 같은 입자의 거동변화가 전단파 속도와 전체시스템의 수평력 변화 같은 전체적인 거동에 영향을 주는 것으로 나타났다.

• 농업과학연구
• /
• 제37권1호
• /
• pp.87-96
• /
• 2010

This study was performed to evaluate the planting properties of herbaceous plant and cool-season grass in porous polymer blocks that were manufactured by using recycled coarse aggregates and unsaturated polyester resin to develop environmentally friendly planting blocks. Unsaturated polyester resin, natural and recycled coarse aggregates and $CaCO_3$ were used. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes(5-10 and 5-20mm). Tests for the void ratio and compressive strength of porous polymer concrete were performed at curing age 7 days. Also, porous polymer block using recycled coarse aggregates were applied to kinds of plants such as tall fescue, Perennial ryegrass, Lesedeza and Alfalfa. After seed, initial germination, germination ratio, cover view and growth length for planting blocks were estimated by various methods.