• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1293-1300
• /
• 2018

For the disadvantages of multi-scale geometric analysis methods such as loss of definition and complex selection of rules in image fusion, an improved multi-focus image fusion method is proposed. First, the initial fused image is quickly obtained based on the lifting stationary wavelet transform, and a simple normalized cut is performed on the initial fused image to obtain different segmented regions. Then, the original image is subjected to NSCT transformation and the absolute value of the high frequency component coefficient in each segmented region is calculated. At last, the region with the largest absolute value is selected as the postfusion region, and the fused multi-focus image is obtained by traversing each segment region. Numerical experiments show that the proposed algorithm can not only simplify the selection of fusion rules, but also overcome loss of definition and has validity.

• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.475-502
• /
• 2016

Nanobeams are widely used as a structural element for nanodevices and nanomachines. The development of nano-sized machines depends on proper understanding of mechanical behavior of these nano-sized beam elements. Small length scales such as lattice spacing between atoms, surface properties, grain size etc. are need to be considered when applying any classical continuum model. In this study, Eringen's nonlocal elasticity theory is incorporated into classical beam model considering the effects of axial extension and the shear deformation to capture unique static behavior of the nanobeams under continuum mechanics theory. The governing differential equations are obtained for curved beams and solved exactly by using the initial value method. Circular uniform beam with concentrated loads are considered. The displacements, slopes and the stress resultants are obtained analytically. A detailed parametric study is conducted to examine the effect of the nonlocal parameter, mechanical loadings, opening angle, boundary conditions, and slenderness ratio on the static behavior of the nanobeam.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.15-21
• /
• 2011

This paper presents an analyzing method of the capacitance of the power transformer for initial voltage distribution and insulation design. When a high incoming surge voltage is accidently occurred in windings of transformer, it does not distribute equally in the windings. This phenomenon makes electric field concentration and the insulating material could be break. Initial voltage distribute mostly depends on capacitances between winding to winding or winding to core in the transformer. If the C network can be structuralized into the equivalent circuit model and be calculated each capacitance element value by circuit analysis and FEM(Finite Element Method) simulation program, the transformer designer could know the place where the structure is to be modified or the insulation to be reinforced. This method quickly provides the data of the voltage distribution in each winding to the designer.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.516-524
• /
• 2004

In this paper, the initial value problem in clustering using K-means or Fuzzy-c-means is considered to reduce the number of iterations. Conventionally the initial values in clustering using K-means or Fuzzy-c-means are chosen randomly, which sometimes brings the results that the process of clustering converges to undesired center points. The choice of intial value has been one of the well-known subjects to be solved. The system of clustering using K-means or Fuzzy-c-means is sensitive to the choice of intial values. As an approach to the problem, the uniform partitioning method is employed to extract the optimal initial point for each clustering of data. Experimental results are presented to demonstrate the superiority of the proposed method, which reduces the number of iterations for the central points of clustering groups.

• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.283-295
• /
• 2021

This paper proposes a method for generating dense depth map using information of color images and depth map generated based on lidar based on self-organizing map. The proposed depth map upsampling method consists of an initial depth prediction step for an area that has not been acquired from LiDAR and an initial depth filtering step. In the initial depth prediction step, stereo matching is performed on two color images to predict an initial depth value. In the depth map filtering step, in order to reduce the error of the predicted initial depth value, a self-organizing map technique is performed on the predicted depth pixel by using the measured depth pixel around the predicted depth pixel. In the process of self-organization map, a weight is determined according to a difference between a distance between a predicted depth pixel and an measured depth pixel and a color value corresponding to each pixel. In this paper, we compared the proposed method with the bilateral filter and k-nearest neighbor widely used as a depth map upsampling method for performance comparison. Compared to the bilateral filter and the k-nearest neighbor, the proposed method reduced by about 6.4% and 8.6% in terms of MAE, and about 10.8% and 14.3% in terms of RMSE.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.103-109
• /
• 2002

This research is aiming to specify the requirement of the investment such as initial cost, running cost earning rate to make effective investment considering the purpose of remodeling and economical value of store building enough to meet the initial purpose of remodeling. The review of earning rate for economical evaluation was performed by the on-site auditing on the structure and function of the building and applying the assessment simulation program, which is to find the possible business model to identify the requirement of building owner through case study. After the research, the following results are obtained. First, it is important that many aspects should be carefully analysis and the best method should be selected as characteristics of remodeling can be defer each other in their implementations. Second, though the remodeling of exist buildings to promote the functions has been applied. no suitable assessment tool has bee developed for deciding the level of remodeling in the view of economical efficiency so far. Third, the economical benefit was evaluated by analysing annual earning rate which is applied by investment items and recovery period for the investment. More specific data bate should be established to apply the suggested economic accession in business enough to forecast the future circumstances. More researches should be promoted on this area continuously as well as the integrated economic evaluation of remodeling on existing building.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.12
• /
• pp.629-637
• /
• 2005

This paper proposes a new anti-windup strategy to suppress integrator windup for PI speed controller and to be implemented on the existing system with minimal modification. When the speed control mode is changed from P controller to PI controller. an appropriate initial value for integrator is assigned. This value restricts overshoot and high settling time. Also, the proposed method guarantees the designed performance independent on operating conditions, i.e. different set-point change and load torque. Simulation and experimental results for PMSM speed controller have shown its superior performance compared with the conditional integration and tracking back calculation.

• Structural Engineering and Mechanics
• /
• v.46 no.1
• /
• pp.39-51
• /
• 2013

An extremum method is presented to predict the wrinkling characteristics of the inflated cone in bending. The wrinkling factor is firstly defined so as to obtain the wrinkling condition. The initial wrinkling location is then determined by searching the maximum of the wrinkling factor. The critical wrinkling load is finally obtained by determining the ratio of the wrinkling moment versus the initial wrinkling location. The extremum method is proposed based on the assumption of membrane material of beam wall, and it is extended to consider beam wall with thin-shell material in the end. The nondimensional analyses show that the initial wrinkling location is closely related to the taper ratio. When the taper ratio is higher than the critical value, the initial wrinkles will be initiated at a different location. The nondimensional critical wrinkling load nonlinearly increases as the taper ratio increases firstly, and then linearly increases after the critical taper ratio. The critical taper ratio reflects the highest load-carrying efficiency of the inflated cone in bending, and it can be regarded as a measure to optimize the geometry of the inflated cone. The comparative analysis shows fairly good agreement between analytical and numerical results. Over the whole range of the comparison, the mean differences are lower than 3%. This gives confidence to use extremum method for bending-wrinkling analysis of inflated conical cantilever beam.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.317-322
• /
• 2007

Seismic exploration is divided by reflection and refraction method greatly, and reflection method can analyze complicated underground structure in the basis high resolution image, and refraction method can grasp the velocity structure of underground accurately. This thesis confirmed application of mixed exploration techniques using advantages of reflection and refraction. Reflection data processing applied conventional technique, and inversion of refraction data applied travel time tomographic technique that using SIRT method. Also, could establish initial information in model variable and improved the result of inversion by restricting model parameter value and dimension of area. Confirmed efficient fact in sequence and velocity structure grasping by utilizing accurate initial velocity model made out on the basis of marine reflection data, and mixed exploration technique using reflection and refraction have propriety that can trust in field application.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.564-571
• /
• 2014

Rotor initial position is an important factor affecting the control performance of electrically excited synchronous motors. This study presents a novel method for estimating rotor initial position based on sliding discrete Fourier transform (sDFT). By injecting an ac excitation into the rotor winding, an induced voltage is generated in stator windings. Through this voltage, the stator flux can be obtained using a pure integral voltage model. Considering the influence from a dc bias and an integral initial value, we adopt the sDFT to extract the fundamental flux component. A quadrant identification model is designed to realize the accurate estimation of the rotor initial position. The sDFT and high-pass filter, DFT, are compared in detail, and the contrast between dc excitation and ac injection is determined. Simulation and experimental results verify that this type of novel method can eliminate the influence of dc bias and other adverse factors, as well as provide a basis for the control of motor drives.