• 터널과지하공간
• /
• 제14권5호
• /
• pp.339-344
• /
• 2004

침식에 따른 횡방성 암반의 초기응력비 변화를 수치해석적으로 구하여 등방성의 경우 및 이론해와 비교한 결과 횡등방성의 영향은 크지 않아 초기지응력비가 작고 침식심도가 깊을 때만 고려하는 것이 좋을 것으로 판단되었다. 수치해석에 의한 응력과 이론적인 값의 차이는 초기 지응력비가 클수록 또 침식되는 깊이가 증가할수록 증가하였다. 또 침식 후의 초기응력비는 심도가 깊어짐에 따라 초기 응력비로부터 발산하였다. 이를 감안하여 침식에 따른 초기응력비 산정식을 제안하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.136-145
• /
• 2011

준설매립후 연직배수공법을 적용하여 지반개량을 수행하는 대규모 국가산업단지 조성 프로젝트를 대상으로, 각 심도별 채취된 불교란 시료를 이용하여 물리즉 특성 및 압밀 특성 등을 분석하기 위한 실내시험을 실시하였으며, 수평 압밀계수 및 현장 초기 응력 산정을 위한 콘 관입 및 소산시험을 수행하였다. 지층을 구성하고 있는 하부의 원지반 점토층과 상부의 준설 매립층은 유사한 해성점토로 구성되어 있으나, 초기 간극비와 초기 함수비, 초기 응력상태, 방향별 투수성과 압축성 등의 압밀특성에 있어서는 시간경과에 따른 압밀거동에 있어 매우 큰 차이를 보이는 다층 지반의 특성을 띠고 있다. 압밀과 관련된 응력이력이 다른 두지층의 초기응력을 산정하기 위하여 콘 관입시험 및 소산시험시의 간극수압 측정결과를 분석하였으며, 이를 통해 압밀이 진행중인 하부 원지반 점토층에서의 매립하중과 상부 성토에 의한 각 심도별 과잉간극수압 분포 및 이를 통한 초기응력을 산정할 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.287-294
• /
• 1999

The tensegrity structure by prestressed cable, which may have large freedom in scale and form and therefore are received much attention from the view points of their light weight and aesthetics, is a very flexible and geometrically unstable structure because the cable material has little initial rigidity. For the stable self-equilibrated state of the usually very deformable structure, the method to find the optimal initial stress by the shape analysis is proposed in this paper. The proposed procedure is to derive the nonlinear finite element formula of cable and truss members considering geometric nonlinearity and used to modified load incremental method adding to Newton-Raphson method with the proposed condition for optimal initial stress. The result of the shape analysis for the tensegrity structure with the radius of 30m is shown the almost approximated shape to architectural shape and the changed procedure of initial stress

• Structural Engineering and Mechanics
• /
• 제37권4호
• /
• pp.367-383
• /
• 2011

In this paper, nonlinear partial differential equations of motion for a hybrid composite plate subjected to initial stresses on elastic foundations are established to investigate its nonlinear vibration behavior. Pasternak foundation and Winkler foundations are used to represent the plate-foundation interaction. The initial stress is taken to be a combination of pure bending stress plus an extensional stress in the example problems. The governing equations of motion are reduced to the time-dependent ordinary differential equations by the Galerkin's method. Then, the Runge-Kutta method is used to evaluate the nonlinear vibration frequency and frequency ratio of hybrid composite plates. The nonlinear vibration behavior is affected by foundation stiffness, initial stress, vibration amplitude and the thickness ratio of layer. The effects of various parameters on the nonlinear vibration of hybrid laminated plate are investigated and discussed.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.89-98
• /
• 2005

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. Therefore membrane structures arc unstable structures initially. These soft structures need to be introduced initial stresses first because of its initial unstable state, and it happens large deformation phenomenon. To find the structural shape after large deformation caused by initial stiffness introduced, we need the shape analysis considering geometric nonlinearity in structural design procedure. In this study, we investigate into the stress concentration at crack of membrane structures. Therefore, using the nonlinear analysis program that NASS (Nonlinear Analysis for Spatial Structures) perform nonlinear analysis, and stress distribution for creak length investigate for using linear elastic fracture mechanics.

• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.355-363
• /
• 2021

The present paper attempts to investigate the propagation of plane waves in an isotropic elastic medium under the effect of initial stress and temperature-dependent properties. The modulus of elasticity is taken as a linear function of the reference temperature. The formulation is applied under the thermoelasticity theory with dual-phase-lag; the normal mode analysis is used to obtain the expressions for the displacement components, the temperature, the stress, and the strain components. Numerical results for the field quantities are given in the physical domain and illustrated graphically. Comparisons are made with the results predicted by different theories (Lord-Shulman theory, the classical coupled theory of thermoelasticity and the dual-phase-lag model) in the absence and presence of the initial stress as well as the case where the modulus of elasticity is independent of temperature.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.341-349
• /
• 2005

Damage often occurs on the surface of railway wheel by wheel-rail contact fatigue. It should be removed before reaching wheel failure, because wheel failure can cause derailment with loss of life and property. The increase or decrease of the contact fatigue life by the metal removal of the contact surface were shown by many researchers, but it has not explained precisely why fatigue life increases or decreases. In this study, the effect of metal removal depth on the contact fatigue life for railway wheel has been evaluated by applying finite element analysis. It has been revealed that the residual stress and the plastic flow are the main factors determining the fatigue life. The railway wheel has the initial residual stress formed during the manufacturing process, and the residual stress is changed by thermal stress induced by braking. It has been found that the initial residual stress determines the amount of metal removal depth. Also, the effects of the initial residual stress and metal removal on the contact fatigue lift has been estimated, and an equation is proposed to decide the optimal metal removal depth for maximizing the contact fatigue life.

• Structural Engineering and Mechanics
• /
• 제56권6호
• /
• pp.1041-1061
• /
• 2015

The influence of hygrothermal effects on the vibration frequency and buckling load of a shear deformable composite plate with arbitrary initial stresses was investigated. The governing equations of the effects of humid, thermal and initial stresses are established using the variational method. The material properties of the composite plate are affected by both temperature and moisture. The initial stress is taken to be a combination of uniaxial load and pure bending in a hygrothermal environment. The influence of various parameters, such as the fiber volume fraction, temperature, moisture concentration, length/thickness ratios, initial stresses and bending stress ratio on the vibration and stability of the response of a laminated plate are studied in detail. The behavior of vibration and stability are sensitive to temperature, moisture concentration, fiber volume fraction and initial stresses.

• 한국터널지하공간학회 논문집
• /
• 제5권2호
• /
• pp.147-159
• /
• 2003

90년대 이후 지하 암반 구조물의 수요가 증가함에 따라 시공 전 설계 단계에서 요구되는 암반내 초기응력에 대한 정량적 정보를 얻기 위해 현장 초기 응력 측정이 광범위하게 수행되고 있다. 제안된 여러 측정법들 중 현장 적용성 면에서 큰 장점을 가진 수압파쇄법이 국내에서는 대표적으로 적용되고 있다. 본 논문에서는 평탄한 지형조건으로 이루어진 서울 중심부 편마암 지역내 저심도 구간의 11개 시추공을 대상으로 수압파쇄법에 의해 구해진 초기응력 측정자료와 수평응력의 크기, 방향성과 심도별 변화 그리고 측압계수 분포 등 과업구간 암반 내 초기응력장의 제반 분포 특성에 대해 논의하고자 한다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.608-619
• /
• 2017

In this paper, the effects of parameters related to the residual stress induced due to laser shock peening process to determine mitigation of the initial tensile residual stresses are discussed, such as the maximum pressure, pressure pulse duration, laser spot size and number of laser shots. In order to estimate the influence of the initial tensile residual stresses, which is generated by welding in 35CD4 50HRC steel alloy, the initial condition option was employed in the finite element code. It is found that $2{\times}HEL$ maximum pressure and a certain range of the pressure pulse duration time can produce maximum mitigation effects near the surface and depth, regardless of the magnitudes of tensile residual stess. But plastically affected depth increase with increasing maximum pressure and pressure pulse duration time. For the laser spot size, maximum compressive residual stresses have almost constant values. But LSP is more effective with increasing the magnitudes of tensile residual stress. For the multiple LSP, magnitudes of compressive residual stresses and plastically affected depths are found to increase with increasing number of laser shots, but the effect is less pronounced for more laser shots. And to conclude, even though the initial tensile residual stresses such as weld residual stress field are existed, LSP is enough to make the surface and depth reinforcement effects.