• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.42.1-42.9
• /
• 2020

Objective: This study aimed to examine the physical properties (pH and flow) of 2 novel bioceramic sealers. Materials and Methods: The tested sealers were a calcium hydroxide sealer (Sealapex) and 2 bioceramic sealers (BioRoot RCS and TotalFill BC Sealer). Flow measurements were conducted according to ISO 6876/2012, with a press method of 0.05 mL of sealer. The pH of fresh samples was tested immediately after manipulation, while set samples were stored for 3 times the recommended setting time. The predetermined time intervals ranged from 3 minutes to 24 hours for fresh samples and from 10 minutes to 7 days and 4 weeks for the set samples. Analysis of variance was performed, with p = 0.05 considered indicating significance. Results: The mean flow values were 26.99 mm for BioRoot, 28.19 for Sealapex, and 30.8 mm for TotalFill BC Sealer, satisfying the ISO standard. In the set samples, BioRoot RCS had higher pH values at 24 hours to 1 week after immersion in distilled water. At 2 weeks, both bioceramic sealers had similar pH values, greater than that of Sealapex. In the fresh samples, the bioceramic sealers had significantly higher initial pH values than Sealapex (p < 0.05). At 24 hours post-immersion, all sealers showed an alkaline pH, with the highest pH observed for TotalFill. Conclusions: The TotalFill BC Sealer demonstrated the highest flow. The bioceramic sealers initially presented higher alkaline activity than the polymeric calcium hydroxide sealer. However, at 3 and 4 weeks post-immersion, all sealers had similar pH values.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.31-40
• /
• 2009

The rheologic properties of elastic impression materials is a very important role as taking high accuracy impression. But, the studies that are focused on the rheologic properties of Korean elastic impression materials are not sufficient. The purpose of this study is to help clinical high accuracy impression taking by testing rheologic properties of elastic impression material that is made by Korea and other countries. Six type III elastic impression materials are tested. Subjects are 2 Korean polyvinylsiloxane(PVS), 2 imported PVS, 1 polyether, and 1 polysulfide. HAAKE RheoStress $1^{(R)}$(Thermo Electron Co. Germany)is used in measuring. HAAKE RheoStress $1^{(R)}$ is plate to plate type rheometer. All subjects is tested 3 times and measuring time is 900 seconds. We measured G′ and loss tangent after mixing. All elastic impression materials had a sigmoid shape on increasing G′ by time and decreasing loss tangent after setting, maximum G' is appeared highest in polyether, and lowest in polysulfide. Initial loss tangent is highest in polyether, and is lowest in Koreans PVS. Significant difference is showed in initial loss tangent between Korean PVS and imported PVS.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.549-554
• /
• 2022

Life table-related studies in insect ecology have been an interesting topic for insect researchers. Two calculation methods are commonly applied to estimate the intrinsic rate of natural increase (r_m) in the life table statistics. The first method is to estimate an approximate r_m by dividing the natural logarithm of the net reproductive rate (R₀) by mean generation time (T) (namely mean generation time-based method). Another approach is to apply the Lotka-Euler equation derived from the population growth equation of Lotka-Volterra to estimate accurate r_m using the maximum likelihood method (Lotka-Euler equation-based method). In the latter case, there is a difference in the estimated r_m value when the initial age class of the target cohort was set to "0" or "1", which confused the application. In this short review, a brief history of the calculation process of the life table was reviewed. It was again confirmed in the Lotka-Euler equation-based method that the form of $\sum\limits_{x=1}^{w}e^{-rx}l_xm_x=1$ should be applied to estimate r_m when the first age class was set to zero, while the form of $\sum\limits_{x=0}^{w}e^{-r(x+1)}l_xm_x=1$ when set to one.

• Journal of Digital Convergence
• /
• v.18 no.9
• /
• pp.191-198
• /
• 2020

In this study, in order to propose an improvement plan for fire simulation training to improve fire response capability, fire simulation training is conducted for three business facilities, and changes according to whether training materials are used and whether the response time for each response stage is reflected in the training evaluation. The response posture and response ability of the training participants were observed and analyzed. As a result of the analysis, it was analyzed that most of the training participants improved their participation in training, response posture, and response ability when the use of training textbooks and response time for each response stage were reflected in the training evaluation. In the event of a fire simulation training, a number of training materials that can similarly implement the fire situation are used to improve and maintain the fire response capabilities (fire notification and fire report, initial extinguishing, and evacuation) of the training participants, and the target time for each response step. The result was that it can be used as a useful index for improving fire response capability and improving fire simulation training in the future and feedback only when quantitative training evaluation is conducted based on this setting.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.1
• /
• pp.84-92
• /
• 1995

Background: Nasal applied continuous positive airway pressure(CPAP) is a highly effective method of treatment for obstructive sleep apnea syndrome. More than a decade of accumulated experience with this treatment modality confirmed that it is unquestionably the medical treatment of choice for patients with obstructive sleep apnea syndrome. However it takes long time to reach optimal CPAP pressure. To save the time to reach optimal pressure, it is necessary to clarify the time to reach optimal pressure for treatment of obstructive sleep apnea syndrome. Method: CPAP pressure is titrated during an overnight study according to a standardized protocol. Just before the presleep bio-calibration procedures, the technician applies the nasal mask and switches on the clinical CPAP unit. Initial positive for pressure is typically 3.0 centimeters of water pressure. After sleep onset, the technician gradually increases the pressure until sleep-disordered breathing events disappear or become minimal. The pressure must maintain maximal airway patency during both NREM and REM sleep to be considered effective. Before recommending a final pressure setting, sleep recording and oximetry data are reviewed by an American Board of Sleep Medicine certified Sleep Specialist and a Registrered Polysomnographic Technologist. Results: We examined the time required to reach optimal pressure during routine CPAP titration in 127 consecutively evaluated individuals diagnosed with sleep-disordered breathing. Results indicate that 33% of patients required more than four hours to attain satisfactory titration. This indicates that a four-hour session is marginally enough time, at best, to determine a proper CPAP pressure setting. Moreover, 60 of 127 patients required further adjustment after optimal pressure was reached. These additional pressure trials were needed to confirm that higher pressures were not superior for eliminating sleep-disordered breathing events. Conclusions: The data presented underscore the logistical difficulty of titrating CPAP during split-night studies without modifying the titration procedure. Futhermore, the time needed to reach optimal pressure makes it improbable that proper CPAP titration can be performed during a 2-3 hour nap study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.443-450
• /
• 2019

We studied to find the optimal manufacturing conditions of coffee grounds sludge RDF with oil drying method. We expanded the lab scale to pilot scale to compare the efficiency of the oil-drying equipment and The selection of the ratio of coffee grounds and oil, the setting temperature, and the temperature change and water content with time were measured. In order to analyze the characteristics of the research results, characteristics of solid fuels produced(Coffee grounds of oil-dried) by calorimeter, TGA, combustion equipment, and combustion gas measuring instrument were analyzed. As a result, the ratio of oil to coffee grounds was 4: 1, and when the setting temperature was set to $300^{\circ}C$, the water content reached 10wt.% or less within 20 minutes. ln addition, it showed high calorific value of 6,273kcal/kg. However, coffee grounds had a similar composition to wood and showed high luminance and produced a lot of CO in combustion gas. As a result, it is considered to be unsuitable for thermoelectric power plant and camping fuel, but the initial ignition speed is high and the heat generation is high, so it is considered that it can replace the fuels for current use.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.1
• /
• pp.48-60
• /
• 1996

This paper present a new technique for doing realistic computer animation. The method is based on forward dynamic simulation and nonlinear problem solving (parameter optimization) technique. Objects are modelled physically and simulated faithfully while satisfying kinematic and geometric constraints. This forward dynamic simulation gives us very realistic motions especially for non-voluntary motions. Then we extend simulation technique to do animation using parameter optimization. The basic idea is to add motion control over the entire animation. The motion control is finding optimal solutions while satisfying user's animation goals. We provide two different animation technique; one is for rigid body without joint actuators and the other is for rigid body with linear joint actuators. To achieve motion control, we convert single simulation to single nonliner function evaluation while either setting initial conditions as variables for the function or allocating control variables in terms of time. This method is presented with two animation examples: dice-magic and human stand-up.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.383-390
• /
• 2004

This study has focused on the possibility for recycling tailings from the Sangdong tungsten mine as admixture for concrete. The XRD(X-ray diffraction analysis) and PSA(Particle size analysis) were performed to find mineralogical characteristics. As a result of XRD analysis, the tailings from the Sangdong tungsten fine were composed of quartz, chlorite, anorthite and cordierite etc. As a result of KSLT for cement mortar mixed with tailings from the Sangdong tungsten mine, most of heavy metals were determined as below the guide line for waste material. In addition, the setting time and compressive strength of cement mortar mixed with tailings from the Sangdong tungsten mine were investigated. It was indicated that the initial and final set were retarded according to increasing replacement of tailings from the Sangdong tungsten mine. The compressive strength of mortar was decreased with increasing replacement of failings from the Sangdong tungsten mine.

• Journal of Korea Multimedia Society
• /
• v.3 no.3
• /
• pp.253-262
• /
• 2000

This paper proposes a new RBF neural network that determines the number and the center of hidden neurons based on the adaptive feature extraction for the input data. The principal component analysis is applied for extracting adaptively the features by reducing the dimension of the given input data. It can simultaneously achieve a superior property of both the principal component analysis by mapping input data into set of statistically independent features and the RBF neural networks. The proposed neural networks has been applied to classify the 200 breast cancer databases by 2-class. The simulation results shows that the proposed neural networks has better performances of the learning time and the classification for test data, in comparison with those using the k-means clustering algorithm. And it is affected less than the k-means clustering algorithm by the initial weight setting and the scope of the smoothing factor.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1998

The distinction between isolated and combined injuries is crucial both for treatment and prognosis. For most combined injuries, surgical treatment continues to be favored over nonoperative treatment. It is generally agreed that isolatel PCL injuries do well without surgery. There has been an interest by many authors to fix the graft directly to the posterior aspect of the tibia(tibial inlay). With this procedure, tibial graft fixation will be more direct and theoretically reduce the bending effects of the graft with a fixation site far away from the tibial insertion. Modified tibial inlay technique, which is the posterior approach does not require the patient to be in the prone or lateral decubitus position during the operation. Use of a double-bundle reconstructive technique is attractive and has been performed by some surgeons. At this time, this procedure is still being investigated and should not be routinely used in the clinical setting until studies have indicated an advantage over current single-bundle techniques. However theologically, double-bundle reconstructive technique is more useful in severe posterior unstable knee. Recent advances have increased our knowledge of the anatomy and mechanical characteristics of the PCL. Basic science research has further increased our awareness of the interaction of the posterolateral structures with the PCL. To achieve restoration of normal posterior laxity, it is critical to address the posterior as well as the postero-lateral structures. Surgical treatment is often complex and requires a wide range of surgical techniques and skills to treat associated injuries. When the PCL is reconstructed, most surgeons choose to reconstruct the anterolateral component using a graft of sufficient size and strength. The initial postoperative rehabilitation should be addressed cautiously in an effort to avoid excessive forces on delicate repairs and reconstructions in these complex injuries. Further research is necessary to evaluate new surgical approaches such as double-bundle reconstructions and tibial inlay techniques as well as improved techniques for capsular and collateral ligament injuries.