• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.970-976
• /
• 2010

Platform convergence originated from the convergence of broadcast and telecommunication is making rapid progress including IT and not-IT fields in order to provide a variety of converged services, S/W eco-system construction, and so on. With the advent of convergence environment, IEEE 802.15.4-based RF4CE technology is rising because of creating momentum for the market using converged connectivity between home and office devices as well as all around located devices. In this paper, we present enhanced RF4CE key seed distribution approach in order to provide efficient connection and control between devices. The proposed approach consists of device mutual authentication, initial vector assignment, and two-phase key seed distribution. Moreover, we make a development real RF4CE test board and its key agreement simulator to verify the proposed approach.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.299-305
• /
• 2010

A half-sib family of two 4-year-old seedlings of Pinus $\times$ rigitaeda was inoculated with each of 20 Pinus thunbergii isolates of Fusarium circinatum (syn. Fusarium subglutinans f. sp. pini) from two pitch canker damaged sites in Jeju Island, South Korea. Initial symptoms of needle damages were visible on most of the seedlings at 18 days after inoculation. The 20 tested isolates were not significantly different in virulence, based on lesion lengths at the site of inoculation (P = 0.217). The most virulent isolate FT-7 showed the longest lesion length. Some seedlings began to die 46 days after inoculation. All seedlings were dead by 68 days after inoculation except two seedlings inoculated with each of isolates FS-2 and FS-13, respectively. Using the FT-7, 38-year-old 11 P. $\times$ rigitaeda trees, which were survived from a seed orchard severely damaged by pitch canker, were inoculated on branches in the seed orchard in Jeju Island to assess differences in susceptibility to pitch canker. The 11 trees differed significantly (P < 0.001) in susceptibility to F. circinatum based on average lesion lengths measured 56 days after inoculation. It is possible that induced resistance contributed to their capacity to limit lesion development. The susceptibility of natural selection P. $\times$ rigitaeda trees are more likely affected by interaction with F. circinatum rather than environmental conditions.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.233-239
• /
• 2010

Supercritical carbondioxide is very effective in removing oils from a variety of seed matrices, devoid of any appreciable amount of phospholipid content. However, the limited solubility of phosphalipids in supercritical carbondioxide leaves behind a potentially valuable by-product in spent seed matrix. Any phospholipid extraction process from the spent matrix must maintain the structure and the quality of phospholipids and must be compatible with the end use of the seed protein meal an animal feed or for human consumption. An initial supercritical carbondioxide extraction of soybean flakes was performed at 32 MPa and $80^{\circ}C$ to extract the oils, leaving the phospholipids in the deflatted soybean flakes, A second step was performed on the defatted soybean flake using $X_{eth}$=0.10, Varying the pressure from 175 MPa to 70.6 MPa and temperature from $60^{\circ}C$ to $80^{\circ}C$. For all supercritical carbon dioxide/ethanol mixture extractions, a fraction rich in phospholipids was obtained. The fractions extracted from defatted soybean flakes were dried and them redissolved in chloroform before HPLC-ELSD analysis. Quantitative and qualitative analysis of phospholipids on soybean seeds, defatted soybean flake, and different extracted phospholipid fractions was carried out, to ascertain the effect of extraction pressure and temperature.

• Journal of Forest and Environmental Science
• /
• v.38 no.1
• /
• pp.38-47
• /
• 2022

Hymenodictyon orixensis (Roxb.) Mabberley (locally known as Bhutum in Bangladesh) is both an ecologically and economically valuable multipurpose tree species for afforestation and reforestation programs in Bangladesh. Seed germination and seedling development study of H. orixense were conducted to find out the response to different growing medium, e.g., polybag (15×10 cm (T₀) and 20×15 cm (T₁)), sand medium in propagator house (T₂), conventional nursery bed (T₃), and root trainer (T₄) in the Nursery. Consequently, germination behavior and seedling morphological parameters of H. orixense were assessed. The results revealed that the sand medium of the propagator house (T₂) provided the highest germination % (58.57±22.30) and the highest germination energy (11.43±2.43) followed by seedlings growing in 20×15 cm polybags (T1) containing forest topsoil and cow-dung at a ratio of 3:1. Except for germination energy, germination values, and germination capacity, other seed biology parameters, particularly imbibition, germination period, germination rate, and plant survival percent in T₁, T₂, T₃, and T₄ were significantly (p<0.05) different from T₀. Each phenotypic parameter of seedlings and dry matter of shoot and root significantly differed from control except root length (p<0.992). Based on this study, Polybags of 20×15 cm size are regarded as the best medium for quality seedling development of H. orixense. The nursery bed (T₃) had the lowest germination performance and developed more inferior quality seedlings. Thereby, 20×15 cm size of polybags with conventional soil and cow-dung media is recommended for maximum germination and to grow the quality seedlings of H. orixense in the Nursery.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.539-547
• /
• 2019

Recently, the international community signed a climate change agreement to prevent global warming. Yet currently, the fossil fuels have been widely used in to supply building energy for cooling and heating. The Green Building certification (G-SEED), an energy efficiency rating for new or existing buildings requires that buildings meet certain conditions. Insulation is used as a building material to reduce the energy supply to buildings and to improve the thermal insulation, and it accounts for more than 90% of the total heat resistance provided by the building surface components that meet the energy-saving design standards of new buildings. In this investigation, a performance evaluation study was conducted through an experimental study by directly extracting the foam polystyrene insulation on-site during the remodeling of a building that was in the range of 22~38 years old. Through tests, it was found that the thermal conductivity of the extrusion method insulation (XPS) was reduced by 48% and the compressive strength of XPS decreased by 36% compared to KS M 3808, which is the initial quality standard. For bead method insulation (EPS) with a thickness of 50mm, the thermal conductivity, the compressive strength, and flexural failure load were similar to the initial quality standard. Therefore, in the calculation of the primary energy requirement per unit area per year, the performance of bead method insulation can be estimated simply by considering the thickness of the insulation, while a correction factor that considers its performance deterioration should be applied when extrusion method insulation is used.

• Journal of Animal Science and Technology
• /
• v.62 no.4
• /
• pp.495-503
• /
• 2020

The purpose of this study was to evaluate effects of replacing soybean meal with perilla seed meal (PSM) on growth performance, proximate composition of meat, meat quality, and fatty acids composition of meat in broilers. A total of 60 one-day-old chicks of ROSS 308 (initial body weight of 44.8 ± 0.4 g) were randomly allotted to four treatment groups (15 replicate cages with 1 broilers per cage) in a period of 5 weeks. Dietary treatments included control (CON) basal diet (corn-soybean meal-based diets) and test diets in which PSM was included at 0.5% (T1), 1% (T2), or 2% (T3) to gradually replace soybean meal. At the end of experiment, all broilers were slaughtered for collecting breast and thigh meat. At 5 weeks, T2 and T3 treatment groups had higher (p < 0.05) body weights than CON and T1 treatment groups. Weight gain was increased (p < 0.05) in T2 and T3 treatment groups. Feed intake was decreased (p < 0.05) in T3 treatment group. Broilers in T2 treatment group had lower (p < 0.05) feed conversion ratio than those in other treatment groups. In proximate composition of breast meat, there was no significant (p > 0.05) difference in moisture and ash. Fat composition of breast meat was significantly (p < 0.05) increased in T2 and T3 treatment groups. Regarding meat quality, broilers fed T3 diet had higher (p < 0.05) water holding capacity than those fed other diets. Regarding fatty acids composition of thigh meat, broilers fed T3 diet had higher (p < 0.05) linolenic acid than those fed other diets. In conclusion, soybean meal replaced by 2% perilla seed meal in broiler diet can improve growth performance, meat quality, and fatty acids composition of thigh meat in broilers. Perilla seed meal can be a lot of potential alternatives feedstuff for soybean meal in this study.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.199-205
• /
• 2010

This study was conducted to investigate the phytotoxic effects of 19 essential oils on seed germination and initial growth of rapeseed (Brassica napus L.). We found that anise, cinnamon, citronella, clove, geranium, lemongrass, mustard and pine oils completely inhibited germination of rapeseed at $100{\times}$ dilute solution. Based on the inhibition rates of rapeseed emergence and initial growth, three essential oils (cinnamon, clove, and geranium) were selected as potential bio-herbicides. Under pre-emergence applications of cinnamon, clove, and geranium oils at 90 kg ai $ha^{-1}$, rates of rapeseed emergence were 7.1, 25.0, and 3.6% and its initial growth were 22.0, 9.9 and 11.0%, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.3
• /
• pp.51-62
• /
• 1991

A comprehensive laboratory investigation of the liquefaction characteristics of Jumunjin standard sand. Seoul sand and Hongsung sand was peformed by the undrained cyclic triaxial compression test under different relative densities, confining pressures and cyclic deviator stresses. The results obtained are as follows ; 1. Liquefaction potential was dominated by the stress ratio at a given number of cycle. That is, the number of cycle required to cause initial liquefaction became samller as the stress ratio increased. 2. Liquefaction potential of a sand was infliuenced by initial relative density or void ratio. Under a given relative density. liquefaction potential of Jumunjin standard sand and Seoul sand was smaller than that of Hongsung sand. 3. The pore pressure ratio of Hongsung sand was the smallest three under a given relative density and stress ratio, and it showed higher value when the cyclic stress and the shear strain were high. 4. An excessive pore pressure ratio not found when initial shear was smaller than 0.01%, and the pore pressure ratio started to increase when initial shear became greater than 0.01%. 5. Soil texture is an important factor to cause liquefaction, and liquefaction potential decreased a the mean grain size decreased. however the sand having fine grain such as Hongsung sand showed somewhat higher liquefaction potential. 6. Based on the analysis of the specimens whose number of the cycles to cause liquefaction was 8~12, it was found that the relationship between density and stress ratio was linear. The curves for Hongsung sand was steeper than the other. 7. From the above results and the method suggested by Seed-Idriss, it may be considered that the damages by Hongsung earthquake was not directly caused by liquefaction.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.274-282
• /
• 1984

In order to study the effect of seed-fertilizer vertical distance with soil moisture and fertilizer levels on the emergence and initial growth, barley cv. Olbori was seeded in the pots filled with sandy loam or loamy sand soils which were adjusted to 80-100% (higher soil moisture) or 50-60% (lower soil moisture) of soil moisture retention percent at 1/10 atmosphere tension. Prior to seeding of barley seed-fertilizer distance was appropriately controlled by adding soils after dressing fertilizer at three levels-normal application ($N:P_2O_5:K_2O=6-9-7kg/10a$), 50% increase of normal dose and double application. In addition, germination experiment was conducted in the various concentrations of fertilizer solutions under room temperature. The results are summarized as follows; 1. Seed-fertilizer vertical distance must be more than three centimeters to avoid from the decrease and retardation of emergence and poor initial growth of bareley by fertilizer application. 2. Emergence of barley more decreased and retarded in sandy soils than loamy soils and was decelerated with increase of application rate in fertilizer and decrease of soil moisture content. 3. Germination rate remarkably decrease from 0.4 percent of nitrogen solution and 0.5 percent of potassium solution and reached zero at 2.3 and 2.4 percent of nitrogen and potassium solutions, respectively. 4. Germination of seeds affected by concentrated fertilizer solutions was remarkably recovered with dilution degree of fertilizer solution.

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.160-168
• /
• 2020

The current density in copper electroplating is directly related with the productivity; then, to increase the productivity, an increase in current density is required. This study is based on an analysis of changes in surface characteristics and mechanical properties by applying the addition of Alcian Blue (AB, C₅₆H₆₈Cl₄CuN₁₆S₄). The amount of Alcian Blue in the electrolytes is changed from 0 to 100 ppm. When Alcian Blue is added at 20 ppm, a seed layer is formed homogeneously on the surface at the initial stage of nucleation. However, crystals electroplated in electrolytes with more than 40 ppm of Alcian Blue are observed to have growth in the vertical direction on the surface and the shapes are like pyramids. This tendency of initial nucleation formation causes protrusions when the thickness of copper foil is 12 ㎛. Thereafter, a lot of extrusions are observed on the group of 100 ppm Alcian Blue. Tensile strength of groups with added Alcian Blue increased by more than 140% compare to no-addition group, but elongation is reduced. These results are due to the decrease of crystal size and changes of prior crystal growth plane from (111) and (200) to (220) due to Alcian Blue.