• The korean journal of orthodontics
• /
• v.41 no.3
• /
• pp.211-218
• /
• 2011

Objective: This case report describes orthodontic treatment of contracted mandibular arch using a trombone appliance. Methods: A 14-year-old girl with Class II division 2 malocclusion, retroclined maxillary incisors, and buccally displaced maxillary canines required dental expansion in 3 spatial directions to correct the contracted maxillary and mandibular arches. In the initial phase of treatment, the maxillary arch was expanded and distalized using a quad-helix appliance and cervical headgear. Following the expansion and leveling of the maxillary arch, a trombone appliance was used to expand the mandibular arch. On correction of the mandibular arch and provision of sufficient space to level the mandibular teeth, fixed orthodontic treatment phase was initiated. Results: A trombone appliance proved effective in correcting the contracted mandibular arch. Because of labiolingual and transversal expansion, the mandibular dental arch perimeter was increased by 7.4 mm; the misalignment of the mandibular teeth was corrected successfully. Conclusions: A trombone appliance may serve as an appropriate clinical alternative for treating moderate mandibular arch crowding caused by the contraction of the dental arch.

• Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.177-183
• /
• 2008

Ex-situ reductive dechlorination of carbon tetrachloride (CT) by iron sulfide in a batch reactor was characterized in this study. Reactor scaled-up by 3.5 L was used to investigate the effect of reductant concentration on removal efficiency and process optimization for ex-situ degradation. The experiment was conducted by using both liquid-phase and gas-phase volume at pH 8.5 in anaerobic condition. For 1 mM of initial CT concentration, the removal of the target compound was 98.9% at 6.0 g/L iron sulfide. Process optimization for ex-situ treatment was performed by checking the effect of transition metal and mixing time on synthesizing iron sulfide solution, and by determining of the regeneration time. The effect of Co(II) as transition metal was shown that the reaction rate was slightly improved but the improvement was not that outstanding. The result of determination on the regeneration time indicated that regenerating reductant capacity after $1^{st}$ treatment of target compound was needed. Due to the high removal rates of CT, ex-situ reductive dechlorination in batch reactor can be used for basic treatment for the chlorinated compounds.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.539-545
• /
• 2009

A feasibility of a pilot scale two-phase anaerobic digestion with ultra filtration system treating garbage leachate were evaluated. The treatment system consisted of a thermophilic acidogenic reactor, a mesophilic methanogenic reactor, and an UF membrane. The average COD removal efficiency of the treatment system was 95% up to the OLR of 3.1 g COD/L/d. The higher COD removal efficiency with membrane unit resulted from the removal of some portion of soluble organics by membrane as well as particulate materials. When the membrane unit was in operation, bulk liquid in acidogenic and methanogenic reactors was partially interchanged, which maintained the acidogenic reactor pH over 5.0 without external chemical addition. Also, with the production of methane in the acidogenic reactor, the organic loading rate of the methanogenic reactor reduced. The initial flux of the membrane unit was $50{\sim}60L/m^2/hr$, but decreased to $5 L/m^2/hr$ after 95 days of operation due to clogging caused by particulate materials such as fibrous materials in garbage leachate. To prevent clogging caused by particulate materials, a pretreatment system such as screening is required. With the improvement with membrane unit operation, the two-phase anaerobic digestion with ultra filtration system is expected to have the possibility of treating garbage leachate.

• Journal of Animal Science and Technology
• /
• v.62 no.3
• /
• pp.365-373
• /
• 2020

This study was designed to evaluate the influence of dietary supplementation of Tenebrio molitor larvae (TM) as an alternative source of protein to fish meal on growth response, retention of nutrient, hematological factors, immune system, and intestinal integrity in weaned pigs. A total of 180 weanling pigs (initial bodyweight of 6.27 ± 0.15 kg; 21 d) were distributed based on the bodyweight between 3 treatments with 6 replicates in each treatment including 10 piglets per replicate. The diets corresponding to treatments consisted of a fish meal diet (CON), a fish meal-dried mealworm diet (TM1, 50% replacement of fish meal with TM meal), and a dried mealworm diet (TM2, 100% replacement of fish meal with TM meal). This study was performed in two phases as phase 1 (d 0 to 14) and phase 2 (d 15 to 28). The pigs in the TM2 treatment showed a greater gain to feed ratio compared with the TM1 pigs in phase 1. Throughout the experimental period, the average daily gain (ADG) of the TM1 pigs was significantly greater than that of the TM2 treatment. The IgG concentration was increased in the TM1 and TM2 treatments compared with the CON pigs in phase 1. In conclusion, the supplementation of TM meal (50% replacement of fish meal) did not show any adverse effects in the performance of weanling pigs, however, 100% replacement of fish meal with TM meal is not recommended.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.200-206
• /
• 2016

This study was carried out to investigate the effect of W substitution on the precipitation behavior of ${\chi}$ and ${\sigma}$ phases in super duplex stainless steel. The ${\chi}$ phase was precipitated at the interface of ferrite / austenite phases and inside the ferrite phase at the initial stage of aging. With an increase in the aging time, the volume fraction of the ${\chi}$ phase increased, and then decreased with the transformation from the ${\chi}$ phase to the ${\sigma}$ phase. The ${\sigma}$ phase was precipitated later than the ${\chi}$ phase, and the volume fraction of x phase increased with the increase in the aging time. The ferrite phase was decomposed into the new austenite (${\gamma}2$) and ${\sigma}$ phases by aging treatment. The decomposition of the ferrite phase into the ${\gamma}2$ and ${\sigma}$ phases was retarded by W substitution for Mo. The volume fraction of the ${\chi}$ phase increased and that of the ${\sigma}$ phase decreased due to W substitution. The ${\chi}$ and ${\sigma}$ phases were intermetallic compounds, which had lower nickel concentration, and higher chromium, molybdenum, and tungsten concentrations. The ${\chi}$ phase has higher molybdenum and tungsten concentrations than those of the ${\sigma}$ phase. The amounts of chromium and nickel in the ${\chi}$ and ${\sigma}$ phases did not change, but these phases have higher concentrations of molybdenum and tungsten due to W substitution for Mo.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.1
• /
• pp.57-66
• /
• 2003

TiO$_2$ sol was prepared by sol-gel method, and this sol was coated in ceramic and glass bead by dip-coating method. The coated catalyst was applied to degrade benzene in the gas phase by exposing to UV -lamp (365 nm) in a batch reactor. The removal efficiency of the benzene was compared by changing various conditions such as the kind of chemical additives, the coating beads (ceramic and glass), solution pH, the initial concentration of TiO$_2$ sol, UV intensity, and benzene concentration. The physical structure of TiO$_2$ sol used in this study was found to be pu-rely anatase type from XRD analysis. The results showed that ceramic bead was effective as the coating agent rath-er than glass bead. The significant change in the benzene removal efficiency of benzene did not occur with chang-ing coating frequency and the initial concentration of TiO$_2$ sol. The removal efficiency of benzene increased with increasing UV intensity, and with acidic treatment of TiO$_2$-coated ceramic bead.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.6
• /
• pp.409-416
• /
• 1997

Leuconostoc sp. LAB145-3A isolated from kimchi produced a bacteriocin which was active against food pathogens, such as Listeria monocytogenes, Enterococcus faecalis, and E. faecium. Bacteriocin production occurred during the early exponential phase of growth and was stable upto the late stationary phase of growth. Optimum conditions for bacteriocin production were $37^{\circ}C$ with an initial pH of 7.0. The bacteriocin of LAB145-3A was sensitive to proteases, but stable for solvents, pH change and heat treatment. It was stable even at autoclaving temperature for 15 min. The bacteriocin exhibited a bactericidal mode of action against Lactobacillus curvatus LAB170-12. The bacteriocin produced by Leuconostoc sp. LAB145-3A was purified by CM-cellulose cation exchange column chromatography and Sephadex G-50 gel filtration. The purification resulted in an approximate 10,000-fold increase in the specific activity. Approximately 4% of the initial activity was recovered. Purified bacteriocin exhibited a single band on the SDS-PAGE with an apparent molecular weight of 4,400 daltons. This bacteriocin was named leucocin K. Leuconostoc sp. LAB145-3A had two residential plasmids with molecular sizes of 23 kb and 48 kb. A comparison of plasmid profiles between LAB145-3A and its mutants revealed that the 23 kb plasmid (pCA23) was responsible for bacteriocin production and immunity to the bacteriocin in Leuconostoc sp. LAB145-3A.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.27-41
• /
• 2006

The physical property and phase transformation in a commercial dental casting high gold alloy was investigated as a function of ageing temperature and time using microvickers hardness tester, X-ray diffraction, optical and electron microscopy and EPMA analyser. 1. With increasing ageing time, the hardness of solution-treated gold alloys increased slowly at the initial stage of ageing treatment at an ageing temperature of $300{\sim}400^{\circ}C$, and it reached a maximum value of hardness at the medium stage. Finally, it decreased gradually during further ageing. The maximum value of hardness at was similar with that of the conventional materials and suitable for using as the crown & bridge. 2. During isothermal ageing at a temperature range of $300{\sim}400^{\circ}C$, three phases consisting of the Au-rich ${\alpha}_1$phase with a face-centered cubic structure, the Pt3Zn ${\alpha}_2$phase with an ordered AuCu3(L12) type(f.c.c.) and the Pt-rich ${\alpha}_3$phase with face-centered cubic structure in solution-treated gold alloys were transformed into different three phases consisting of the ${\alpha}_1$phase, the ${\alpha}_3$phase and the PtZn $\beta$phase with an ordered AuCu I(L10) type. 3. The hardening of gold alloys was attributed to the lattice strains of the matrix resulting from the transformation of the ${\alpha}_2$phase to the $\beta$phase. 4. The softening of gold alloys during over-ageing was attributed to the coarsening of the nodules consisting of the $\beta$phase and ${\alpha}_1$matrix.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.4
• /
• pp.161-164
• /
• 2020

A peroneal dislocation is a rare disease that is often misdiagnosed as a simple sprain and can be treated inadequately in the acute phase. For this reason, it is important to have an appropriate diagnosis in the early stages because it can progress to chronic and recurrent conditions. Surgical treatment is considered mainly when progressing to chronic recurrent dislocation. Recently, patients with an acute peroneal dislocation tend to prefer surgical treatment, so accurate initial diagnosis and management are very important. This paper reports a case of chronic recurrent peroneal tendon dislocation in both ankle joints, which was treated by a superior peroneal retinaculum reconstruction and a groove deepening procedure.

• Biomolecules & Therapeutics
• /
• v.32 no.3
• /
• pp.291-300
• /
• 2024

Autosomal dominant polycystic kidney disease (ADPKD), a congenital genetic disorder, is a notable contributor to the prevalence of chronic kidney disease worldwide. Despite the absence of a complete cure, ongoing research aims for early diagnosis and treatment. Although agents such as tolvaptan and mTOR inhibitors have been utilized, their effectiveness in managing the disease during its initial phase has certain limitations. This review aimed to explore new targets for the early diagnosis and treatment of ADPKD, considering ongoing developments. We particularly focus on cell polarity, which is a key factor that influences the process and pace of cyst formation. In addition, we aimed to identify agents or treatments that can prevent or impede the progression of renal fibrosis, ultimately slowing its trajectory toward end-stage renal disease. Recent advances in slowing ADPKD progression have been examined, and potential therapeutic approaches targeting multiple pathways have been introduced. This comprehensive review discusses innovative strategies to address the challenges of ADPKD and provides valuable insights into potential avenues for its prevention and treatment.