• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1053-1054
• /
• 2008

This paper presents the mobile robot initial velocity estimation using spatial/temporal information from passive RFID system. A mobile robot is traveling along a sequence of line segments, each at a constant velocity, and the number of passive tags sensed at every sampling instant is at most one. To simplify the problem, a mobile robot is commanded to traverse two passive tags with steering angle unchanged. The 6th order polynomial equation for the mobile robot initial velocity estimation is obtained, along with some discussion on resolving the multiplicity of solutions.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.127-131
• /
• 2003

This paper describes an initial pole position estimation method of a magnetic pole sensorless permanent magnet synchronous motor(PMSM) with an incremental encoder, The accurate initial pole position is estimated by using an efficient numerical method of Secant Method, which finds either of two zero torque/force positions and then the correct d-axis. It can be simply applicable to both rotary and linear PMSM because it only requires the tuned current controller and the relative position information. The experimental results show the validity of the proposed method with respect to highly accurate pole position estimation under the moderate moving distance and convergence time.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.578-580
• /
• 2005

This paper proposes the algorithm for the initial pole-position estimation of a surface PM-LSM, which is carried out under the pseudo-position control with-out a pole sensor and is insensitive to the motor parameters. This algorithm is based on the principle that the initial pole-position is calculated by the reverse trigonometric-function using the two reference currents, which are informed from the speed controller. The effectiveness of the proposed algorithm is confirmed by the arithmetical analysis and the experiment. IPP is well estimated within a satisfied moving-distance and a shorter estimation taken-time even if large disturbance such as cogging and friction are existed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.13-20
• /
• 2005

This paper has proposed an algorithm for the initial pole position estimation of a permanent magnet linear synchronous motor(PMLSM). The algorithm finds the initial pole position observing the maximum values of a position generated by the new proposed two reference frames for the same force input. So, the proposed algorithm does not utilize the motor parameters and is insensitive to them. Moreover, the proposed algorithm is easily realized because the proposed method is just using PI controller

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.328-330
• /
• 2007

This paper deals with the estimation method on the initial pole position of a z-axis permanent magnet linear synchronous motor(PMLSM) without magnetic pole sensors such as Hall sensors. The proposed method takes account of the z-axis conditions such as the gravitational force and also the load conditions. The algorithm consists of two steps. The first step is to estimate the initial q-axis approximately by monitoring the movements at predefined different test q-axes. The second step is to estimate the real q-axis as accurately as possible based on the results at three different test q-axes. Experimental results on the z-axis PMLSM show good estimation characteristics of the proposed method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.103-104
• /
• 2021

This study attempted to confirm the possibility of estimating condensation time and initial compressive strength with five types of estimation needles in the existing Durometer D type. In order to determine the surface finishing operation time and develop a method for estimating the initial age compression strength, an estimation needle capable of complexly measuring the estimation time and the initial age compression strength based on the Durometer D type was derived as 1.5, 2.0mm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.680-687
• /
• 2008

This paper presents map creation algorithm and initial attitude estimation method for the proposed optical head tracker system. The optical head tracker system consists of the IR stereo cameras and infrared LEDs as features on the helmet. In order for the stereo camera to track the luminous LEDs, it must take in to account the light radiation from the LEDs to determine the position of the center points. The proposed map creation algorithm makes map data about the position of features center points on the helmet frame. Also, initial attitude estimation method is proposed to estimate the initial attitude and position of a pilot head from the camera frame by the use of the feature pattern on the helmet. Therefore, the head motion can be expressed with respect to the body frame of a flight.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.213-223
• /
• 2015

The helicopter initial design model was established by using the latest weight estimation equations based on the Tishchenko's methodology through the study existing initial design tools. The sequential decomposition method is used to reduce analysis time in the sizing. Empirical parameters of the weight estimation equation were also extracted from numerical and regression analysis for a helicopter database. Design input and output values were compared with the RISPECT design tool. Finally, comparison of the re-design resulting for several existing helicopters was presented and showed the good agreement within less than 5% in the weight estimation and main rotor sizing. Established initial design model was proved to be effectively used as initial design tool.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.4
• /
• pp.350-360
• /
• 2018

Analysis of ship's manoeuverability in shallow water is an important task from the perspective of the vessels' navigational safety. Since the number of ships operated in restricted water has increased due to the enlargement of vessels and ships represent different characteristics of the manoeuverability when operated in shallow and deep water, it is significant to evaluate ship manoeuverability at initial design stage. At the initial stage of design, the estimation of manoeuverability is generally performed with hydrodynamic coefficients estimated based on empirical formula. However, the accuracy of estimating hydrodynamic coefficients by the empirical formula in shallow water is poor compared to that in deep water. Therefore, the error in the estimation of manoeuverability increases in shallow water. In this study, CFD is proposed to improve the accuracy of manoeuverability in shallow water at the initial design stage and hydrodynamic coefficients were obtained based on PMM test in shallow water. Furthermore, the ship manoeuverability was estimated both the proposed strategy and the empirical formula. At last, validity of the proposed strategy using CFD for the estimation of manoeuverability was confirmed by comparison with the manoeuverability estimation results from model test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2643-2648
• /
• 2012

In the RFID Sytem, When leaders recognize the tag, a anti-collision scheme is an important factor in the performance of the system. Probabilistic-based anti-collision scheme using the slot status is a technique to estimate the number of tags. the schemes to quickly and accurately estimate the number of tags has been a lot of research. However, A initial number tag are not considering in the number of tags unknown environment. In the paper, estimation scheme for the initial number of tag is proposed to solve the problems. we analyze the performance by the initial number of tag and the proposed scheme.