• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.66-70
• /
• 2001

The partial discharge testing is widely used in diagnostic measuring technology because it gives low stress to power equipment which is undertaken tests. Therefore it is very useful method compare to previous destructive methods and effective diagnosis method in power system that requires on-line/on-site diagnosis. But partial discharges have very complex characteristics of discharge pattern, so it is required continuous research to development of precise analysis method. In recent, the study of partial discharge is carrying out discover of initial defect of power equipment through condition diagnosis and system development of degradation diagnosis using HFPD(High Frequency Partial Discharge) detection. In this study, simulated system is manufactured and HFPD occurred from those simulator is measured with broad-band antenna in real time, the degradation grade of system is analyzed through produced patterns in simulated target according to the AI/statistics processing.

• Journal of Korean Neurosurgical Society
• /
• 제50권6호
• /
• pp.532-534
• /
• 2011

Temple trauma that appears initially localized to the skin might possess intracranial complications. Early diagnosis and management of such complications are important, to avoid neurologic sequelae. Non-penetrating head injuries with intracranial hemorrhage caused by a driven bone fragment are extremely rare. A 53-year-old male was referred to our hospital because of intracerebral hemorrhage. He was a mechanic and one day before admission to a local clinic, tip of metallic rod hit his right temple while cutting the rod. Initial brain computed tomography (CT) and magnetic resonance imaging demonstrated scanty subdural hematoma at right temporal lobe and left falx and intracerebral hematoma at both frontal lobes. Facial CT with 3-D reconstruction images showed a small bony defect at the right sphenoid bone's greater wing and a small bone fragment at the left frontal lobe, crossing the falx. We present the unusual case of a temple trauma patient in whom a sphenoid bone fragment migrated from its origin upward, to the contralateral frontal lobe, producing hematoma along its trajectory.

• 시스템엔지니어링학술지
• /
• 제8권2호
• /
• pp.19-25
• /
• 2012

As modern weapon systems have evolved into embedded software systems, the capability to develop, install, and maintain high-quality software products is becoming increasingly valuable in today's competitive aerospace and defense industry. It is desirable, especially for government-contracted projects whose end-users are military personnel, that specific types of software quality elements are assured early during product development; namely, functionality and usability. Motivated by this need to approach improving software quality from a user's perspective, this paper presents a case study that analyzes system-level software integration testing results for a weapon system indigenously developed in the Republic of Korea. Quantitative data, such as software defect ratios and configuration change rates, are computed to observe meaningful trends with respect to functionality - represented by tests designed to verify the system's electrical signal interfaces - and usability, which is evaluated in terms of how often the initial human-computer interface had to be re-designed. Insights gained from these exercises are subsequently presented as a set of "lessons learned" to take into account when developing new software items for complex weapon systems.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.75-78
• /
• 2001

Recently, the HFPD measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Also HFPD testing is able to offer the judgement standard of degradation level of HV machine and can detect discharge signals in live-line. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires live-line diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In recent, the study of partial discharge is carrying out discover of initial defect of power equipment through condition diagnosis and system development of degradation diagnosis using HFPD(High Frequency Partial Discharge) detection. In this study, simulated transformer is manufactured and HFPD occurred from transformer is measured with broad band antenna in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages.

• 소성∙가공
• /
• 제27권5호
• /
• pp.289-295
• /
• 2018

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.421-424
• /
• 2000

Cartilage injuries are frequent nowadays. The previous surgical treatment of cartilage defect was limited. Another approach in the treatment of cartilage injuries is the use of reconstitute cartilage consisting of chondrocytes cultured in suitable biodegradable scaffolds. Current studies have demonstrated the compatibility of chondrocytes with different biomaterials and the chondrogenesis in various types of porous scaffolds. The cell ingrowth into the porous scaffolds is modulated by initial cell loading efficiency. Therefore, well-interconnected pore structure and even pore distribution of the scaffolds are essential for efficient cell seeding. According to our previous work, well-interconnected macroporous scaffolds can be prepared by gas-foaming/salt-leaching method using ammonium bicarbonate salt as porogen additives. In this work, primary chondrocytes were cultured in PLGA 65/35 scaffolds fabricated by using our method. Cells seeded in the scaffolds showed well distribution by agitated seeding method. Histochemical staining of proteoglycans present in the scaffolds was used to visualize the chondrocyte ingrowth in the scaffolds. At 3 weeks, the population of chondrocytes was increased for the most part of the scaffolds, and extra cellular matrix (ECM) secretion was increased as culture periods progressed.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제18권3호
• /
• pp.202-208
• /
• 2015

Progressive familial intrahepatic cholestasis type 3 (PFIC3) is an autosomal recessive disorder of cholestasis of hepatocellular origin, typically seen in infancy or childhood caused by a defect in the ABCB4 located on chromosome 7. Here we report on an older patient, aged 15, who presented with biochemical testing that led to an initial consideration of a diagnosis of Wilson disease (WD) resulting in a delayed diagnosis of PFIC3. Diagnosis of PFIC3 was later confirmed by molecular studies that identified novel mutations in the ABCB4 gene. Cholestasis due to PFIC3 can cause elevated hepatic copper and increased urine copper excretion that overlap with current diagnostic criteria for WD. Molecular diagnostics are very useful for establishing the diagnosis of PFIC3. Ursodeoxycholic acid ameliorates cholestasis in PFIC3, and may help mediate a reduction in hepatic copper content in response to treatment.

• 대한화학회지
• /
• 제40권10호
• /
• pp.656-662
• /
• 1996

저온상압법에 의해 Si/Al의 비가 100정도되는 ZSM-5를 합성하였으며 시간 경과에 따른 결정화과정을 $^{27}Al$ 및 $^{29}Si$ MAS NMR spectea 및 FT-IR로 고찰하였다. 저온상압 하에서 합성한 결과 초기 반응물질 및 성분비에 따라 화학적 이동은 기종의 연구와는 다른 경향을 보였으나 반응이 진행됨에 따라 최종 생성물의 화학적 이동은 전형적이 ZSM-5 영역에서 나타나고 있음을 확인하였다. 그리고 국부결함은 소성에 의해 제거되었으며 최종생성물의 XRD 및 SEM의 결과에서도 합성된 물질이 ZSM-5임을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.63-71
• /
• 2016

Installed PV module in field is affected by shading caused by various field environmental factors. Bypass diodes are installed in PV module for preventing a power loss and degradation of PV module by shading. But, Bypass diode is easily damaged by surge voltage and has often initial a defect. This paper propose the electric characteristic variation and the power prediction of PV module with damaged bypass diode. Firstly, the resistance for normal bypass diode and damaged bypass diode of resistance was measured by changing the current. When the current increases, the resistance of normal bypass diode is almost constant but the resistance of damaged bypass diode increases. Next, To estimate power of PV module by damaged bypass diode, the equation for the current is derived using solar cell equivalent circuit. Finally, the derived equation was simulated by using MatLab tools, was verified by comparing experimental data.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.53-60
• /
• 2005

Fusing press m/c is used for heating and pressing the specimens that are fed into between the two moving belts. Therefore the belt movement, belt temperature, and the pressure between belts must be kept constant. Especially, the belts should move in a limited operation range. When the belts run far out of the operation point, the machine has to be stopped, which results in a product defect because the fusing conditions, e.g., temperature and pressure, change during the transient process time period. It is important to avoid the belt stopping by maintaining the belt movement in a limited range. This study reports about the movement of the endless fusing belt in a long-span roller fusing m/c. The belt position changes as the 1st-order system does; if the roller axes are slanting each other with a certain angle, the belt running around the two rolls shows a dynamic behavior with the time that deviates fastly at the beginning from the initial condion and slows down. Then it reaches at a final position. The skewer the axes, the greater the position change. The inital change rate of the belt becomes large as the skewness of the axes between the two rollers increases.