• Animal Bioscience
• /
• 제34권1호
• /
• pp.85-92
• /
• 2021

Objective: The objectives of this study were to determine the in situ degradation parameters and appropriate feeding level of pineapple cannery by-products (PCB) based on the growth performance and blood parameters of growing Hanwoo (Bos taurus coreanae) steers fed various levels of PCB. Methods: Two ruminally cannulated Holstein cows were used for in situ disappearance rate measurements. Nylon bags (5×10 cm, 45 ㎛ pore size) filled with 5 g of PCB in triplicate were inserted into the ventral sac of the two cannulated Holsteins cows and incubated for 0, 2, 4, 8, 16, 24, and 48 h. A total of 16 castrated growing Hanwoo steers (12.5±0.5 months old, 302.9±25.7 kg of initial body weight [BW]) were used for the experiment. Animals were stratified by initial BW and then randomly assigned to one of four experimental diets (0%, 1.5%, 3.0%, or 6.0% of PCB, on the dry matter [DM] basis) fed for 91-d, including 30-d of adaptation. Results: Soluble fraction a of DM and crude protein (CP) was 61.9% and 86.0%, fraction b of DM and CP was 32.7% and 11.2%, and indigestible fraction c of DM and CP was 5.4% and 2.8%. The 6.0% PCB feeding group showed lower productivity compared to animals in the other treatments. Increasing the dietary level of PCB did not alter DM intake, but it was numerically lowest in the 6.0% feeding group. The gain to feed ratio was linearly decreased by increasing of PCB. The quadratic broken-line test estimated that 2.5% (DM basis) was the maximum feeding level of PCB in growing Hanwoo steers (y = 0.103 - 0.001×[1.245-x]2, R2 = 0.18). Conclusion: Diets containing up to 2.5% PCB can be fed to growing Hanwoo steers without adverse effects on growth performance.

• Animal Bioscience
• /
• 제34권2호
• /
• pp.233-242
• /
• 2021

Objective: The aim of this study was to determine the effect of pineapple cannery by-product (PCB) level on the growth performance and carcass characteristics of finishing Hanwoo steers. Methods: The feeding stage was divided into early and late finishing stages. A total of 60 castrated Hanwoo steers (13.9±0.8 months old, 418.8±36.5 kg initial body weight [BW]) were blocked by initial BW and then randomly allotted into 12 pens (five head/pen). The pens were randomly assigned to control (CONT), low PCB (LPCB), or high PCB (HPCB) treatments. These diets contained 0%, 1.5%, or 3.0% of PCB (on a dry matter [DM] basis; as-fed basis was 0%, 10.6%, or 21.2%), respectively. Results: For the early finishing stage, body weight gain (BWG) and average daily gain (ADG) of the CONT and LPCB feeding groups were greater (p<0.05) than those of the HPCB feeding group. In addition, there were linear and quadratic effects on BWG and ADG with increasing dietary PCB level (p<0.05). The gain to feed (G:F) ratio tends to quadratically decrease with an increasing PCB level in the early finishing stage (p = 0.076). Growth performances of late finishing stage were not affected by PCB level. The marbling score of the LPCB feeding group was similar to that of the CONT feeding group. However, there was a linear decrease (p< 0.05) in marbling score and quality grade among treatments as PCB was increased in the diet. In the longissimus muscle free amino acid profile, histidine composition increased linearly (p<0.05) with an increasing level of PCB. Conclusion: The level of PCB 1.5% DM in diet can be used for finishing steers without any adverse effects on growth and carcass performances. However, there were some negative effects on growth and carcass performance in the HPCB feeding group.

• Animal Bioscience
• /
• 제35권3호
• /
• pp.410-421
• /
• 2022

Objective: Two series of experiments were conducted to determine how the incremental levels of sodium metabisulfite (SMB)-treated fruit and vegetable discards (FVD) in diet of Hanwoo heifers and cows affect their performance and health. Methods: In Exp. 1, 36 Hanwoo heifers were stratified by age (13.3±0.83 mo) and initial body weight (305±19.7 kg), and divided randomly to one of three diets containing 0%, 10%, or 20% SMB-treated FVD (as-fed basis). The experiment lasted 110 d, including 20 d of adaptation. In Exp. 2, 24 multiparous Hanwoo cows were divided into three groups based on age (48.2±2.81 mo) and initial body condition score (2.64±0.33). Cows in each block were assigned randomly to one of three diets containing 0%, 11%, or 22% SMB-treated FVD (as-fed basis). The experiment lasted 80 d, including a 20-d adaptation period. In both experiments, SMB-treated FVD was used as a replacement for wet brewers grain in total mixed ration (TMR). Results: Growing heifers exhibited no differences in their daily feed intake (6.58±0.61 kg/d dry matter [DM]), average daily gain (0.60±0.07 kg/d), and body condition score when they consumed the incremental levels of SMB-treated FVD. Although most blood metabolites were unaffected by treatments, blood urea-N and β-hydroxybutyrate levels decreased linearly as the SMB-treated FVD level increased in TMR. Similar to Exp. 1, minor differences were found in daily feed intake (8.27±0.72 kg DM/d) and body condition score of Hanwoo cows. Most blood metabolites remained unaffected by treatments, but blood urea-N decreased as the SMB-treated FVD level in TMR increased. Conclusion: Our findings suggest that SMB-treated FVD could be safely incorporated into the diet of Hanwoo heifers and cows, potentially improving N-use efficiency in the body while not impairing performance or health.

• Journal of Periodontal and Implant Science
• /
• 제47권2호
• /
• pp.106-115
• /
• 2017

Purpose: The possibility of immediate or early loading has become popular in implant dentistry. A prerequisite for the immediate or early loading of an implant prosthesis is the achievement of initial stability in the implant. Moreover, in response to clinicians' interest in verifying clinical stability to determine the optimal time point for functional loading, a non-invasive method to assess implant stability has been developed on the basis of resonance frequency analysis (RFA). The primary objective of this study was to monitor the stability of sandblasted, large-grit, and acid-etched (SLA) implants with different diameters during the early phases of healing by RFA. The secondary objective was to evaluate how the initial stability of implants varied depending on different surface modifications and other contributing factors. Methods: Thirty-five implants (25 SLA implants and 10 resorbable blasting media [RBM] implants) placed in 20 subjects were included. To measure implant stability, RFA was performed at baseline and at 1, 2, 3, 4, 6, and 10 weeks after surgery. Results: The longitudinal changes in the implant stability quotient (ISQ) values were similar for the SLA implants with different diameters and for the RBM implants. During the initial healing period, the ISQ decreased after installation and reached its lowest values at 1 week and 2 weeks, respectively. The mean ISQ values in the SLA implants were significantly higher in ${\varnothing}5.0mm$ implants than in ${\varnothing}4.0mm$ implants. Men showed a higher ISQ than women. Mandibular sites showed a higher ISQ than maxillary sites. Conclusions: All implants used in this study are suitable for immediate or early loading under appropriate indications. A wider diameter and SLA surface treatment of implants could improve the stability, if the implant is fixed with at least 30 Ncm of insertion torque.

• 한국지진공학회논문집
• /
• 제13권2호
• /
• pp.1-14
• /
• 2009

교각의 합리적이고 경제적인 내진설계를 위해서는 연성도에 기반한 내진설계가 필요하며 이를 위해서는 신뢰성 있는 전단평가가 필수적이다. RC 기둥의 전단거동은 휨거동과 달리 부재의 단면크기, 형상비, 축력, 연성도 등 다양한 요인에 의하여 영향을 받아 거동이 매우 복잡하다.따라서,이들 요인을 고려한 많은 설계식 및 경험식이 제안되고 있으나 부재의 초기전단강도와 연성도에 따른 전단강도 저하를 평가하는데 상당한 차이를 보이고 있다. 본 연구에서는 형상비,단면의 중공비, 복부면적, 하중패턴을 변수로 하는 실험적 연구를 수행하여 중공단면 기둥의 초기 전단강도 특성을 살펴보았다. 실험결과는 기존의 다양한 전단평가식과 비교.검토하여 특성을 분석하였으며, 역학적 특성과 실험결과에 기초하여 보다 합리적인 초기 전단평가식을 제안하고 타당성을 검토하였다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제19권3호
• /
• pp.186-192
• /
• 2016

Purpose: To evaluate the correlation between colon transit time (CTT) test value and initial maintenance dose of polyethylene glycol (PEG) 4000 or lactulose. Methods: Of 415 children with chronic functional constipation, 190 were enrolled based on exclusion criteria using the CTT test, defecation diary, and clinical chart. The CTT test was performed with prior disimpaction. The laxative dose for maintenance was determined on the basis of the defecation diary and clinical chart. The Shapiro-Wilk test and Pearson's and Spearman's correlations were used for statistical analysis. Results: The overall group median value and interquartile range of the CTT test was 43.8 (31.8) hours. The average PEG 4000 dose for maintenance in the overall group was $0.68{\pm}0.18g/kg/d$; according to age, the dose was $0.73{\pm}0.16g/kg/d$ (<8 years), $0.53{\pm}0.12g/kg/d$ (8 to <12 years), and $0.36{\pm}0.05g/kg/d$ (12 to 15 years). The dose of lactulose was $1.99{\pm}0.43mL/kg/d$ (<8 years) or $1.26{\pm}0.25mL/kg/d$ (8 to <12 years). There was no significant correlation between CTT test value and initial dose of laxative, irrespective of the subgroup (encopresis, abnormal CTT test subtype) for either laxative. Even in the largest group (overall, n=109, younger than 8 years and on PEG 4000), the correlation was weak (Pearson's correlation coefficient [R]=0.268, p=0.005). Within the abnormal transit group, subgroup (n=73, younger than 8 years and on PEG 4000) correlation was weak (R=0.267, p=0.022). Conclusion: CTT test value cannot predict the initial maintenance dose of PEG 4000 or lactulose with linear correlation.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.186-195
• /
• 2016

The finite element modeling of a ship for hull structural analysis on the basis of new harmonized common structural rules (CSR-H) is to be extended to the cargo holds in fore and after body of a ship. Unlike the parallel middle-body where the external and internal features of hull are equal along to the longitudinal direction of a ship, in fore and after body, the external and internal features of hull vary linearly or even irregularly in forms of a surface or a curve along to the longitudinal direction of a ship. Thus, it needs lots of design man-hours for the modeling for structural analysis. In order to save man-hours in initial structural design phase of a ship, the specified 3D CAD system has been adopted in shipbuilding industry. Through the interface between CAD and CAE (rule scantling and direct strength assessment), design man-hour in initial design phase can be saved even under the environment of CSR-H.

• Membrane and Water Treatment
• /
• 제1권4호
• /
• pp.297-316
• /
• 2010

Membrane fouling is one of the major operational concerns of membrane processes which results in loss of productivity. This paper investigates the ultrafiltration (UF) results of synthetic oil-in-water (o/w) emulsion using flat sheets of polysulfone (PSf) membrane synthesized with four different compositions. The aim is to identify the mechanisms responsible for the observed permeate flux reduction with time for different PSf membranes. The experiments were carried out at four transmembrane pressures i.e., 68.9 kPa, 103.4 kPa, 137.9 kPa and 172.4 kPa. Three initial oil concentrations i.e., 75 $mgL^{-1}$, 100 $mgL^{-1}$ and 200 $mgL^{-1}$ were considered. The resistance-in-series (RIS) model was applied to interpret the data and on that basis, the individual resistances were evaluated. The significances of these resistances were studied in relation to parameters, namely, transmembrane pressure and initial oil concentration. The total resistance to permeate flow is found to increase with increase in both transmembrane pressure and initial oil concentration while for higher oil concentration, resistance due to concentration polarization is found to be the prevailing resistance. The applicability of the constant pressure filtration models to the experimental data was also tested to explain the blocking process. The study shows that intermediate pore blocking is the dominant mechanism at the initial period of UF while in the later period, the fouling process is found to approach cake filtration like mechanism. However, the duration of pore blocking mechanism is different for different membranes depending on their morphological and permeation properties.

• 한국콘텐츠학회논문지
• /
• 제19권8호
• /
• pp.194-204
• /
• 2019

본 연구의 목적은 디지털콘텐츠 산업과 블록체인 기술의 융합 생태계가 활성화 될 수 있도록 산업 이해관계자들이 상호 활용 가능한 ICO의 핵심요인과 관련된 선행연구를 정리하고, 요인별 중요도를 산출하는 데 있다. 이에 선행연구에서 도출된 핵심요인을 바탕으로 계층구조모델을 구조화하고 AHP 방법론을 활용하여 각 요인의 가중치를 도출하였다. 상위요인에서는 사업(0.422) > 기술(0.172) > 콘텐츠(0.144) > 인력(0.104) > 제도(0.099) > 토큰(0.059) 순으로 중요하게 나타났다. 하위요인에서는 가중치 내림차순으로 실현가능성(0.162) > 법률규제(0.071) > 시장성장성(0.063) 등으로 나타나 각각의 시사점을 기술하였다. 본 연구의 결과는 ICO 발기자뿐만 아니라 투자자 입장에서도 활용될 수 있을 것이며, 산업적 초기 단계에 속하는 블록체인 융합생태계의 학문적 토대를 제공할 수 있을 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.636-645
• /
• 2012

This study introduces an information granular-based fuzzy radial basis function neural networks (FRBFNN) based on multiobjective optimization and weighted least square (WLS). An improved multiobjective space search algorithm (IMSSA) is proposed to optimize the FRBFNN. In the design of FRBFNN, the premise part of the rules is constructed with the aid of Fuzzy C-Means (FCM) clustering while the consequent part of the fuzzy rules is developed by using four types of polynomials, namely constant, linear, quadratic, and modified quadratic. Information granulation realized with C-Means clustering helps determine the initial values of the apex parameters of the membership function of the fuzzy neural network. To enhance the flexibility of neural network, we use the WLS learning to estimate the coefficients of the polynomials. In comparison with ordinary least square commonly used in the design of fuzzy radial basis function neural networks, WLS could come with a different type of the local model in each rule when dealing with the FRBFNN. Since the performance of the FRBFNN model is directly affected by some parameters such as e.g., the fuzzification coefficient used in the FCM, the number of rules and the orders of the polynomials present in the consequent parts of the rules, we carry out both structural as well as parametric optimization of the network. The proposed IMSSA that aims at the simultaneous minimization of complexity and the maximization of accuracy is exploited here to optimize the parameters of the model. Experimental results illustrate that the proposed neural network leads to better performance in comparison with some existing neurofuzzy models encountered in the literature.