• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.147-157
• /
• 2006

To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.6
• /
• pp.448-453
• /
• 2004

Transformed roots of Schisandra chinensis were obtained following co-cultivation of in vitro cultivated plantlet segments with Agrobaterium rhizogens ATCC15834. This root was examined for its growth and gomisin J contents under various culture conditions. Among the six basal culture media tested, WPM (Lloyd & McCown, 1980) medium supplemented with 5% sucrose was the best roots growth 6.2 (g D.W/flask) and gomisin J accumulation 1.56 $(X10^{-3}\;ug/g\;D.W)$. Initial inoculum size correlated with the yield of biomass while gomisin J contents was not affect. Gomisin J production was influenced by the initial sucrose concentration and the highest production yield was achieved at the concentration of 7%. The optimal shaking speeds for roots growth and gomisin J production was 120 and 140 rpm, respectively.

• Lingua Humanitatis
• /
• v.2 no.1
• /
• pp.303-314
• /
• 2002

The main purpose of this paper is to show how Jespersen analyzed the date of English compound related with reduplication. Especially dealing with the compound words he classified the examples related with reduplication as a separate part and attempted to account for the patters based on the structure of the first syllable constituting the initial part of the second element in a compound word. 1 tried to explain the peculiar shape of the reduplicational pattern in English based on the Optimality Theory, especially the method of 'melodic overwriting' of McCarthy(1997). According to the analysis the initial part of the second element of a compound has to be stipulated before reduplication occurs. When the reduplicant has to be decided at the first syllable of the second element, the form which is stipulated to take the position comes to appear at the post instead of repeating the morphemic shape of the first syllable at the first element of the word.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.34-47
• /
• 1996

Veneers of two nominal thicknesses, 1.5 and 2.5mm, were rotary peeled from Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata) bolts unheated and heated in the water vat temperature of $66^{\circ}C$ by rising a final temperature at 10cm core of $60^{\circ}C$ to remain core diameter of 11.4cm. 1.5 and 2.5mm thick veneer cut from the heated Japanese larch were significantly thinner than those of the unheated bolt and 2.5mm thick veneer cut from the heated Dahurian larch were significantly thicker than that of the unheated bolt. 1.5mm thick Dahurian larch veneer and 1.5 and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts, respectively. Check distance on the loose side of 1.5mm thick veneer cut from the heated Radiata pine was significantly wider than that of the unheated bolt. However check distances on the loose side of 1.5 and 2.5mm thick Japanese larch and Dahurian larch veneers and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts. Also the depth of check on the loose side of three species showed insignificantly difference between the unheated and heated bolts. Arithmatic mean deviation($R_a$) and maximum height($R_{max}$) of the profile on the loose side of dried veneer by preheating the bolt compared with unheated bolts were different among apecies and between veneer thickness. The preheating treatment slightly affected qualities of these thin veneers such as 1.5 and 2.5mm. The yield of 2.5mm thick veneer from the heated radiata pine was significantly higher than that of the unheated bolt. However the yield of 2.5mm thick veneer for other two species and 1.5mm thick veneer for three species showed insignificant difference between the unheated and heated bolts. The yield of 2.5mm thick veneer for three species were higher than those of 1.5mm thick veneer. The average yields of green veneer of Japanese larch. Dahurian larch and Radiata pine were 57.1, 55.1 and 54.0 percent, respectively. Variables such as initial MC. drying time and veneer thickness had strong effect for Japanese larch veneer, less effect for Radiata pine veneer and nuch less effect on final MC for Dahurian larch veneer in jet drying. Correlation between the current MC and the drying time of Dahurian larch with low variation of initial MC was higher than those of Japanese larch and Radiata pine veneer with high variation of initial MC in high temperature drying. Thickness shrinkages of 2.5mm thick veneer for Japanese larch and Radiata pine were higher than those of 1.5mm thick veneers, but shrinkages of Dahurian larch veneer were similar between two nominal veneer thicknesses.

• Phonetics and Speech Sciences
• /
• v.2 no.3
• /
• pp.115-124
• /
• 2010

The current study investigated the role of acoustic correlates of domain-initial strengthening in lexical segmentation of a non-native language. In a series of cross-modal identity-priming experiments, native Korean listeners heard English auditory stimuli and made lexical decision to visual targets (i.e., written words). The auditory stimuli contained critical two word sequences which created temporal lexical ambiguity (e.g., 'mill#company', with the competitor 'milk'). There was either an IP boundary or a word boundary between the two words in the critical sequences. The initial CV of the second word (e.g., [$k_{\Lambda}$] in 'company') was spliced from another token of the sequence in IP- or Wd-initial positions. The prime words were postboundary words (e.g., company) in Experiment 1, and preboundary words (e.g., mill) in Experiment 2. In both experiments, Korean listeners showed priming effects only in IP contexts, indicating that they can make use of IP boundary cues of English in lexical segmentation of English. The acoustic correlates of domain-initial strengthening were also exploited by Korean listeners, but significant effects were found only for the segmentation of postboundary words. The results therefore indicate that L2 listeners can make use of prosodically driven phonetic detail in lexical segmentation of L2, as long as the direction of those cues are similar in their L1 and L2. The exact use of the cues by Korean listeners was, however, different from that found with native English listeners in Cho, McQueen, and Cox (2007). The differential use of the prosodically driven phonetic cues by the native and non-native listeners are thus discussed.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.514-518
• /
• 2008

After overproduction of a recombinant $\beta$-galactosidase of Bifidobacterium infantis in Pichia pastoris, a synthesis of galacto-oligosaccharides (GOS) from 36% lactose using the enzyme (170.74 U/mg) was investigated. The transgalactosylation ratio reached up to 25.2% with 83.1% conversion of initial lactose and the maximum yield of GOS was 40.6%. The GOS syrup was composed of a 13.43% galacto-oligosaccharides, 5.06% lactose, and 8.76% monosaccharides. The prebiotic effect of GOS on the growth of bifidobacteria and lactobacilli strains was investigated in vitro. The maximum growth rate of Bifidobacterium breve and Lactobacillus acidophillus in GOS syrup (5%, v/v) media were 0.49 and 0.96/hr that are higher than those in 1%(w/v) galactose and 1%(w/v) lactose containing media. However, there was no significant difference between the specific growth rates of L. acidophillus in 1%(w/v) glucose and 5%(v/v) GOS syrup. Our data showed that GOS definitely promoted the growth of B. breve ATCC $15700^T$ and L. acidophilus ATCC 33323.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.449-452
• /
• 2009

The absence of Fe, Se, and Mo in a minimal medium prevented the production of hydrogen from the anaerobic culture of Escherichia coli MC4100. Fe, Se, and Mo are known to be cofactors of formate dehydrogenase ($FDH_{II}$) of both E. coli and Enterobacter aerogenes. Hence when these trace elements are absent in the minimal medium, hydrogen production through formate dehydrogenation would be inhibited not only in E. coli but also in E. aerogenes. Hydrogen production by E. aerogenes 413 was delayed when lacking these trace elements. Therefore, it is believed that hydrogen production of E. aerogenes is initiated not by the reoxidation of nicotinamide adenine dinucleotide (NADH) but by formate decarboxylation.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.154-160
• /
• 2001

For major structural components periodic inspections and integrity assessments are needed for the safety. However, many flaws are undetectable because sampling inspection is carried out during in-service inspection. Probabilistic integrity assessment is applied to take into consideration of uncertainty and variance of input parameters arise due to material properties and undetectable cracks. This paper describes a Probabilistic Fracture Mechanics(PFM) analysis based on the Monte Carlo(MC) algorithms. Taking a number of sampling data of probabilistic variables such as fracture toughness value, crack depth and aspect ratio of an initial surface crack, a MC simulation of failure judgement of samples is performed. for the verification of this analysis, a comparison study of the PFM analysis using a commercial code, mathematical method is carried out and a good agreement was observed between those results.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.74.1-74.1
• /
• 2016

미국 텍사스 주 맥도날드 천문대에 위치한 2.1m 망원경에 부착된 SQUEAN (SED Camera for QUasars in EArly uNiverse)은 2010년부터 운용되고 있는 CQUEAN을 바탕으로 개발된 적외선 영역 광학기기이다. 20개의 필터 장착이 가능한 필터 휠 제어 시스템을 가지고 있는 SQUEAN 시스템은 SMOP (SQUEAN Main Observation software package), KFC82 (KHU Filter wheel Control software package for McDonald 82 inch Telescope), KAP82 (KHU Auto-guiding software Package for McDonald 82 inch Telescope) 등으로 구성되어 있다. 그러나 대형 필터 휠을 제어하는 모터의 토크부족과 감속기의 백래시(Backlash)의 영향으로 오프셋의 오차가 커서 초기위치의 재설정 없이 하룻밤 이상 관측을 지속하는데 어려움이 있었다. 토크가 크고 인코더가 장착된 모터 교체와 제어 프로그램 등을 변경하고, 백래시의 영향을 최소화할 수 있도록 소프트웨어로 보정하였다. 또한, SMOP로부터 네트워크 통신을 통해 초기화용 필터 마스크(Initial Filter Mask:IFM)를 제작하여 돔 플랫 이미지에서 정확한 필터의 위치를 측정하는 기능을 도입하였다. 이 발표에서는, 개선된 하드웨어 및 소프트웨어의 내용과 테스트한 결과에 대해 보여준다.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.33-46
• /
• 2006

This study was carried out to investigate a radio-frequency/vacuum (RF/V) drying ability and physical properties of the green boards and the pre-kiln dried boards with 40 mm thickness, and the 70 mm-thick green board of Iroko (Milicia excelsa). The major results were summarized as follows; The drying time from initial moisture content (MC) of 110% to approximate 6% MC for a 40mm-thick green board was 192 hours, and about 200 hours for the 70 mm-thick green board, respectively and so the RF/V drying times were dramatically shortened compared to conventional kiln drying time. The case hardenings at the RF/V drying completion stage test were very negligible, thus represented almost no existence of the residual stress. The checks were very slightly formed on all of the boards during the RF/V drying test, but crook appeared quite severely. During the accelerating test, the water-resistant treated specimens had not experienced any signs of checking occurred, whereas the control boards had encountered very frequent occurrences of end checking and slight surface checking. There were no observations of warping and discoloring regardless of the treatment.