• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.1-5
• /
• 2020

By adapting black body leadflame and thin film type Green A filter, we successfully demonstrated night vision imaging system (NVIS) Green A compatible LED. Fabricated NVIS compatible LEDs show small form factor compared to that of commercialized NVIS compatible LED. Especially, NVIS radiance and chromaticity of MIL-STD-3009 specification can be satisfied simultaneously and easily by controlling the color temperature of the white LED as well as the concentration of the Green A dye and the thickness of the Green A filter. The optimal dye concentration of the NVIS Green A filter is expected to be about 1 wt%. The results of this study are expected to contribute to miniaturization, weight reduction and localization of avionic display and lighting devices.

• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.

• 센서학회지
• /
• 제12권1호
• /
• pp.44-50
• /
• 2003

외부 침입자가 있을 시 적외선 센서에서 외부 침입자를 감지하고, 외부인이 출입하기 위해서는 비밀번호를 사용하여야만 출입할 수 있는 보안시스템을 제작하였다. 구현된 시스템의 제어회로는 VHDL을 이용하여 실현하였다. 제작된 시스템은 여러조건아래에서 실험을 한 결과, 안정된 동작상태를 나타내었고, 출력은 LCD, LED, buzzer를 통하여 나타내었다. 기존의 다른 보안시스템에 비해 유지보수가 간단하고 기능 추가가 용이하도록 설계하였다.

• 한국통신학회논문지
• /
• 제38C권8호
• /
• pp.700-705
• /
• 2013

LED 조명을 홈네트워킹에 적용하기 위해서는 홈게이트웨이와 LED 조명 사이에서 신호를 전송하는 전력선통신이 필요하며, 양방향 전송을 위한 적절한 통신방식이 요구된다. 또한 한 개의 LED 조명을 이용해서 여러 가입자를 서비스하기 위해서는 LED의 특성에 맞는 적절한 다중화방식이 요구된다. 본 논문에서는 전력선통신과 가시광통신을 결합함으로써 빌딩 내부 넓은 범위를 서비스할 수 있는 홈네트워킹 시스템을 제안하고 테스트베드를 이용하여 성능을 시험하였다. 이때 가시광통신의 다중화에는 LED 비선형성을 극복하기에 적절한 Binary CDMA 방식을 이용하였으며, 역방향 전송에는 적외선을 이용하였다.

• 산업기술연구
• /
• 제30권A호
• /
• pp.25-29
• /
• 2010

In this paper, we implement a multi-touch system using FIDR. The implementation consists of hardware manufacture and development of image processing system. In the hardware system, touch screen, infrared LED placements and infrared camera are made. The image processing procedure is to extract each pointer's coordinates from image data and includes binary-coding, noise-elimination, labeling and calculation of mass center. From the implementation, we are able to make a multi-touch system with considerably lower cost than the existing ones.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.273-279
• /
• 2004

최근에 소개된 single high-intensity LED 중합기는 이전의 LED 중합기에 비해 높은 광도를 가지며 짧은 중합시간에 적절한 물성을 가질 수 있다고 한다. 본 연구는 single high-intensity LED 중합기의 중합성능을 평가하기 위하여 거리에 따른 중합도를 조사하였다. Mylar strip사이에 복합레진(Filtek Z250)을 넣고 압접시켜 만든 얇은 필름형 시편을 LED 중합기(Elipar Freelight 2, 10초), 플라스마 중합기(Flipo, 6초)와 할로겐 중합기 (XL3000, 20초)를 사용해 0mm, 2mm, 4mm, 6mm에서 광도를 측정하고 중합시켰다. 중합된 시편을 Fourier Transform Infrared Spectrometer(FTIR)를 이용해 중합도를 측정한 후 다음과 같은 결론을 얻었다. 1. 모든 중합기에서 거리가 증가할수록 유의하게 광도가 감소하였으며 LED중합기의 경우 6mm에서 다른 중합기에 비해 가장 많은 광도 감소율을 보였다(p<0.05). 2. 모든 중합기에서 거리가 증가함에 따라 4mm까지는 중합도가 감소하였지만 유의한 차이는 보이지 않았다(p>0.05). 하지만 4mm와 6mm사이에서는 모든 중합기에서 유의하게 감소하였다(p<0.05). 3. 각 거리에 따른 중합기간의 중합도 차이는 0mm, 2mm, 4 mm에서 LED중합기가 다른 중합기보다 유의하게 높은 중합도를 보였으며 (p<0.05) 플라스마 중합기와 할로겐 중합기 사이에서는 유의한 차이가 없었다. 하지만 6 mm에서는 모든 중합기 사이에 유의한 차이를 보이지 않았다(p>0.05).

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.23-29
• /
• 2014

In this study, cooling and heat-transfer tests are performed to compare and evaluate the thermal conductivity in a prepared CNT TIM (thermal interface material). A polymerized CNT heat-transfer resin and commercial thermal grease (Shinetsu G-747) were applied for a comparison test in both cases. Cooling experiments with an aluminum foil specimen were performed in order to measure the temperature distribution using an infrared camera, and in heat radiation experiments, performance testing of the thermal conductivity was conducted using high-power LEDs. Carbon resin with the polymerization of graphite and carbon black, and CNT-polymerized CNT resin with graphite and carbon black were tested and compared with using G-747. It was found that the cooling performance and the heat transfer ability in both the carbon resin and the CNT-polymerized CNT resin were greater than those of G-747 because the temperature by 5. $0^{\circ}C$ in both cases appeared lower than that of the G-747.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.284-288
• /
• 2015

The color temperature flexibility-typed Lighting Emitting Diode(LED) lighting control system proposed in this thesis employs Pulse Width Modulation(PWM) technique to control the brightness of LED lighting. The LED lighting used as a light source has 20W downlight composed of two types of LED chips: one is Warm White and the other is Cool white. One multi-sensor module consisting an infrared sensor, an illumination sensor, and a temperature sensor was made, to which Bluetooth wireless communication technique was applied to enable a smartphone application to control lighting brightness and identify the information collected from the sensor. CS-1000, a spectroradiometer, was used to measure LED dimming control and the changing values of a color temperature in eight steps. According to a test, it was found that it was possible to change a color temperature from 3187K of Warm White LED to 5600K of Cool White LED.

• 한국멀티미디어학회논문지
• /
• 제21권12호
• /
• pp.1379-1386
• /
• 2018

In this paper, we proposed eyeglass type periorbital wrinkle treatment device for reducing and improving periorbital wrinkles using near infrared LED of 850nm wavelength and galvanic current. The proposed periorbital wrinkle treatment device is equipped with a control system based on F-PCB. It consists of eight near-infrared LEDs and four indicator LEDs for treatment of right and left periorbital wrinkles. The eyeglass frame is coated with conductive material, so galvanic current can flow to the skin of periorbital wrinkle contacted to it. One male adult in the mid-40s was allowed to use the device for 10 minutes every day for 4 weeks. After 4 weeks, image analysis using optical equipment for measuring wrinkles indicated that wrinkle indexes were reduced.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1081-1081
• /
• 2001

The constant need for quality improvement and production rationalization in the chemical and related industries has led to the increasing replacement of conservative control procedures by more specific and environmentally compatible analytical techniques. In this respect, vibrational spectroscopy has developed over the last yews - in combination with new instrumental accessories and statistical evaluation procedures - to one of the most important analytical tools for industrial chemical quality control and process monitoring in a wide field of applications. In the present communication this potential is demonstrated in order to further support the implementation of mid-infrared (MIR), near-infrared (NIR) and Raman spectroscopy Primarily as industrial on-line tools. To this end the data of selected feasibility studies will be discussed in terms of the individual strengths of the different techniques for the respective application.