• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.959-962
• /
• 2003

This study is the effect of lithium Lithium Complex as an electron injection layer(EIL) on the performance of organic light emitting devices (OLEDs) and optimized the device efficiency by varying thickness of EIL layer. The device with 2nm GDI 101 layer showed significant enhancement of the device performance and device lifetime. We also compared GDI 109 and GDI 117 with GDI 101 as an electron injection layer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.3414-3434
• /
• 2016

Classical key generation is complicated to update and key distribution generally requires fixed infrastructures. In order to eliminate these restrictions researchers have focused much attention on physical-layer (PHY-layer) based key generation methods. In this paper, we present a PHY-layer fingerprints based fuzzy key generation scheme, which works to prevent primary user emulation (PUE) attacks and spectrum sensing data falsification (SSDF) attacks, with multi-node collaborative defense strategies. We also propose two algorithms, the EA algorithm and the TA algorithm, to defend against eavesdropping attacks and tampering attacks in mobile cognitive radio networks (CRNs). We give security analyses of these algorithms in both the spatial and temporal domains, and prove the upper bound of the entropy loss in theory. We present a simulation result based on a MIMO-OFDM communication system which shows that the channel response characteristics received by legitimates tend to be consistent and phase characteristics are much more robust for key generation in mobile CRNs. In addition, NIST statistical tests show that the generated key in our proposed approach is secure and reliable.

• Journal of information and communication convergence engineering
• /
• 제4권4호
• /
• pp.158-161
• /
• 2006

[ $Bi_2Sr_2Ca_nCu_{n+1}O_y(n{\geq}0)$ ] thin film is fabricatedvia two different processes using an ion beam sputtering method i.e. co-deposition and layer-by-layer deposition. A single phase of Bi2212 can be fabricated via the co-deposition process. While it cannot be obtained by the layer-by-layer process. Ultra-low growth rate in our ion beam sputtering system brings out the difference in Bi element adsorption between the two processes and results in only 30% adsorption against total incident Bi amount by layer-by-layer deposition, in contrast to enough Bi adsorption by co-deposition.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.17-22
• /
• 2007

[ $TiO_2$ ] nanoparticles are added into UV curable resin to increase the refractive index of the cover-layer which is laminated on the media for cover-layer incident NFR. High refractive index is required for the cover-layer operating for the solid immersion lens optics with high effective numerical aperture. The eyepattern could be achieved from the cover-layer coated 20 GB ROM disc in which the refractive index of the cover-layer was 1.75, but the gap servo was unstable due to the rough surface of the cover-layer. Even though the light loss due to the nanoparticles is not serious, the rough microstructure is developed by adding the nanoparticles in the organic binder material. To achieve smooth surface for the stable gap servo, some special techniques should be added, for example the solubility of the nanoparticles should be enhanced by the optimization of the surface of the nanoparticles.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.28-30
• /
• 2009

We have studied organic layer-thickness dependent electrical and optical properties of bottom- and top-emission devices. Bottom-emission device was made in a structure of ITO(170 nm)/TPD(x nm)/$Alq_3$(y nm)/LiF(0.5 nm)/Al(100 nm), and a top-emission device in a structure of glass/Al(100 nm)/TPD(x nm)/$Alq_3$(y nm)/LiF(0.5 nm)/Al(25 nm). A hole-transport layer of TPD (N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine) was thermally deposited in a range of 35 nm and 65 nm, and an emissive layer of $Alq_3$ (tris-(8-hydroxyquinoline) aluminum) was successively deposited in a range of 50 nm and 100 nm. Thickness ratio between the hole-transport layer and the emissive layer was maintained to be 2:3, and a whole layer thickness was made to be in a range of 85 and 165 nm. From the current density-luminance-voltage characteristics of the bottom-emission devices, a proper thickness of the organic layer (55 nm thick TPD and 85 nm thick $Alq_3$ layer) was able to be determined. From the view-angle dependent emission spectrum of the bottom-emission device, the peak wavelength of the spectrum does not shift as the view angle increases. However, for the top-emission device, there is a blue shift in peak wavelength as the view angle increases when the total layer thickness is thicker than 140 nm. This blue shift is thought to be due to a microcavity effect in organic light-emitting diodes.

• 한국통신학회논문지
• /
• 제19권8호
• /
• pp.1612-1627
• /
• 1994

기존 OSI 세션계층 동기기능은 문자 위주의 단일 미디어 동기만을 다루고 있기 때문에 audio, video, graphic 등의 멀티미디어 정보통신 서비스를 위해서는 새로운 동기 방식과 프로토콜이 필요하다. 본 논문은 이러한 멀티미디어 동기 서비스를 위해서 개념적인 동기층 환경을 설정하고 이 계층에서 사용하는 '멀티채널, 기준미디어 동기' 기법의 동기층 프리미티브와 동기층 프로토콜을 설계, 제안 하였다. 본 멀티미디어 동기층(MS layer)은 상대편 동기층과의 연결을 설정한 후 미디어별로 별도의 채널을 관리하여 미디어별 특성을 효과적으로 이용할 수 있게 하고, 미디어 프레임 번호를 time stamp처럼 이용함으로써 특정 동기점의 삽입 없이도 손쉽게 동기점을 찾아내고 동기 서비스를 제공한다.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1330-1334
• /
• 2012

잠수함이 가장 취약한 시기는 잠수함이 스노클이나 잠망경 운용을 위하여 잠망경 심도로 항해할 경우이며, 이때에는 비음향 탐지센서인 레이더와 광학, 사람에 의한 시각에 탐지될 확률이 매우 높다. 따라서 본 논문에서는 이러한 상황에서 탐지되는 취약성을 극복하고자 잠수함 마스트 및 잠망경 부분에 비음향 스텔스를 적용하고자 한다. 먼저 비음향 탐지센서에 대해서 조사하고, 그에 따른 스텔스 기법을 분야별 분석하여 최적화한 결과 다층형 구조로 선체표면부터 RAM layer, IR layer, Camouflage layer 구조로 각각 RAM layer는 자성재료인 페라이트계열로 3~5 mm, IR layer는 Ceramic 또는 Nickel 계열로 1~2 mm, Camouflage layer는 군청색 계열 페인팅을 제시하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권4호
• /
• pp.154-158
• /
• 2005

Organic molecules have many properties that make them attractive for electronic applications. We have been examining the progress of memory cell by using molecular-scale switch to give an example of the application using both nano scale components and Si-technology. In this study, molecular electronic devices were fabricated with amino style derivatives as redox-active component. This molecule is amphiphilic to allow monolayer formation by the Langmuir-Blodgett (LB) method and then this LB monolayer is inserted between two metal electrodes. According to the current-voltage (I-V) characteristics, it was found that the devices show remarkable hysteresis behavior and can be used as memory devices at ambient conditions, when aluminum oxide layer was existed on bottom electrode. The diode-like characteristics were measured only, when Pt layer was existed as bottom electrode. It was also found that this metal layer interacts with organic molecules and acts as a protecting layer, when thin Ti layer was inserted between the organic molecular layer and Al top electrode. These electrical properties of the devices may be applicable to active components for the memory and/or logic gates in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.187-188
• /
• 2005

In this paper, big free standing metal structures for electrostatic MEMS switches are easily fabricated using photoresist sacrificial layer. The entire process sequence, through the removal of the sacrificial layer, is kept below 150 $^{\circ}C$ to avoid curing problem of photoresist sacrificial layer. Metal structure is fabricated by thermal evaporator and a self test electrode is fabricated underlying metal suspended structure for testing by electrostatic force. The new wet release process is considered using methanol rinse, general wet release process cause stiction problem by capillary force during drying, and the yield is dramatically improved than previous wet release process using DI water rinse. The fabrication becomes much simpler and cheaper with use of a photoresist sacrificial layer.