• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1633-1638
• /
• 2003

In case that in-leakage through the valve disk occurs, a numerical study is performed to estimate on thermal stratification phenomenon in the Safety Injection piping connected with the Reactor Coolant System piping of Nuclear Power Plant. As the leakage flow rate increases, the temperature difference between top and bottom of horizontal piping has the inflection point. In the connection point of valve and piping, the maximum temperature difference between top and bottom was 185K and occurred in the condition of 10 times of standard leakage flow rate. In the connection point of elbow and horizontal piping, the maximum temperature difference was 145K and occurred in the condition of 15 times of standard leakage flow rate. In the vertical piping of Safety Injection piping, the near of connection point between elbow and vertical piping showed the outstanding thermal stratification phenomenon in comparison with another region because of turbulent penetration from Reactor Coolant System piping. In order to prevent damage of piping due to the thermal stratification when in-leakage through the valve disk occurs, the connection points between valve and piping, and the connection points between elbow and piping need to be inspected continually.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.77-80
• /
• 1997

The torsion tests in the range of 900~110$0^{\circ}C$, 5.0$\times$10-2~5.0$\times$100/sec were performed to study the recry stallization behavior of 304 stainless steel in the high temperature multistage deformation. The no-recrystallization temperature(Tnr) and fractional softening(FS) were determined by the change of flow curves. The inflection points of stress slope were moved to lower temperature area as the strain rate and the interrupt time were increased. From the multipass flow curve, the intersection between pass stress and FS curve was corresponding to the pass which the FS dropped abruptly and it was shown that the recrystallization area could be determined by the FS measurement in multipass deformation.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.445-449
• /
• 2010

The purpose of this study is to improve recycling rate of the waste glasses by investigating bloating mechanism. In this study, we use waste glass(W/G) and hard clay(H/C) as raw materials. The artificial lightweight aggregates were formed by plastic forming($\phi$=10 mm) and sintered by fast firing method at different temperatures(between 700 and $1250^{\circ}C$). The physical properties of the aggregates such as bulk specific gravity, adsorption and microstructure of surface and cross-section are investigated with the sintering temperature and rate of W/G-H/C contents. As the result of the bulk specific gravity graphs, we can found out the inflection point at content of W/G 60 wt%. From the microstructure images, we considered the artificial lightweight aggregates content of W/ G over 60wt% are distributed numerous micro-pores by organic oxidation without Black Core and the artificial lightweight aggregates of W/G below 60 wt% are distributed macro-pores with Black Core.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.35-42
• /
• 2010

The increasing regular medical check up rate for early diagnosis in disease has increasing sleep endoscopy rate because of reduction with discomfort. The purpose of this study was to determine the number of recovery bed as increasing sleep endoscopy rate using check up time, waiting time & recovery time at a general hospital in Seoul. This study was analyzed using ARENA 10.0 program. At present and as increasing of sleep endoscopy rate 10%, 20% was increased recovery time, waiting time & the rate of bed inflection. So at present, the number of recovery bed has to increase for client's safety and as increasing of sleep endoscopy rate 10%, 20% has to increase 3 and then waiting time decreased in 2 minutes.

• Parasites, Hosts and Diseases
• /
• v.28 no.1
• /
• pp.63-67
• /
• 1990

This study was performed to evaluate the status of intestinal parasitic infections among the inhabitants in two islands (Chu-do and Doomi-do) of Tongyeong.gun, Kyeongsangnam-do (Province), from August to September, 1989. A total of 189 stool specimens was collected from the inhabitants of 3 villages and examined by Kato's cellophane thick smear and formalin.ether sedimentation techniques. Stoll's dilution egg counting technique was done for the quantitative examination of helminth eggs. The overall Positive rate of intestinal Parasites was 30.2%. The egg Positive rate of Ascaris lumbricoides was 2.1%, that of Trichuris trichiura 24.3%, hookworm 2.1%, Trichostrongylus orientazis 0.5%, Czonorchis sinensis 1.1%, heterophyid 1.6%, and Taenia species 2.6%. The cyst positive rate of Giardia lamblia was 1.6% and that of Entamoeba soli 0.5%. In T. trichiura infection, the egg Positive rate of females (29.9%) was much higher than that of males (17.2%). Among the age groups, 10~19 year group showed the highest inflection rate, 32.4%. It was revealed that the prevalence of intestinal parasitic infections among the inhabitants of remote islands should be still high in comparison with ever-reported ones in urban or rural areas.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.52-57
• /
• 1992

Using the new type auxiliary(K-1), dyeing experiment was done at the various dyeing conditions and the effects of auxiliary on the dyeing properties of acid milling dye for the silk fiber were dicussed. The results obtained were as follows; 1. The exhaust rate of acid milling dye was increased according to the auxiliary concentration at dyebath pH 7, But the increasing tendency of exhaust rate was decreased above auxiliary concentration 3% o. w. f.. 2. It was the same tendency of exhaust rate at dyebath pH 5, but the diffusion was more powerful at dyebath pH 7 than pH 5. 3. The decreasing ratio of exhaust rate according to dye concentration increasing was lower at auxiliary addition than auxiliary non-addition. 4. The exhaust rate curve according to increasing dyeing temperature showed the inflection point at auxiliary non-addition, but it was not observed in auxiliary addition. Consequently, it seems to be avoid that the occurrence of uneven dyeing at auxiliary addition.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.9
• /
• pp.630-635
• /
• 2011

As this study was estimation of factors of rapid OUR (Oxygen Uptake Rate) monitoring method. Experiment for estimating factors of optimal microorganism activity was carried out in this study. In addition to comparison and estimation of SCOD variation by OUR variation using real wastewaters. In consequence OUR value was highest when F/M ratio, pH and temperature were 0.03~0.05, 6.0~8.5 and $20{\sim}30^{\circ}C$ respectively. Oxygen consumption by nitrification was incomplete. OUR variation of SCOD was recognizable difference of degradable rate at before and after of inflection point OUR. This study used an experimental method for real time prediction of the influent of the sewage treatment plant for optimal operation is expected to be able to do.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.400-406
• /
• 2012

To improve the hydrogen yield from biological fermentation of organic wastewater, a co-culture system of dark- and photo-fermentation bacteria was investigated. In a pure-culture system of the dark-fermentation bacterium Clostridium butyricum, a pH of 6.25 was found to be optimal, resulting in a hydrogen production rate of 18.7 ml-$H_2/l/h$. On the other hand, the photosynthetic bacterium Rhodobacter sphaeroides could produce the most hydrogen at 1.81mol-$H_2/mol$-glucose at pH 7.0. The maximum specific growth rate of R. sphaeroides was determined to be 2.93 $h^{-1}$ when acetic acid was used as the carbon source, a result that was significantly higher than that obtained using either glucose or a mixture of volatile fatty acids (VFAs). Acetic acid best supported R. sphaeroides cell growth but not hydrogen production. In the co-culture system with glucose, hydrogen could be steadily produced without any lag phase. There were distinguishable inflection points in a plot of accumulated hydrogen over time, resulting from the dynamic production or consumption of VFAs by the interaction between the dark- and photo-fermentation bacteria. Lastly, the hydrogen production rate of a repeated fed-batch run was 15.9 ml-$H_2/l/h$, which was achievable in a sustainable manner.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.1
• /
• pp.31-43
• /
• 1968

1. Shell height frequencies of the fresh-water cockle, Corbicula elatior, sampled in the period of 1960 to 1963, are analyzed to assess the age composition and average growth pattern. Cumulative frequencies in a sample are traced on a probability scale, and the points of inflection on a probability graph are assumed to dissect age groups. 2. Seasonal growth of Corbicula elatior in the Naktong River ill as follows: Young cockles settle down on river-bed by June and grow rapidly during the summer season, reaching 14mm in shell height by October. From October to April the growth is very slow. The rapid growth in the second year starts around in May. 3. Survival rate per year for Corbicula elatior in the Naktong River is estimated to be $5\~10\%$ by age composition.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.384-386
• /
• 2003

Striking in change that present our country is much by electricity industry reform and the Korea Electric Power Corporation is deciding power distribution system reliability indices every year but power distribution system for reliability evaluation and establishment of investment program are consisting punily. If consider efficient inflection of resources and hereafter power distribution division that is limited for target achievement of schedule level service evaluation and reliability side in operation of the power distribution system, can expect efficient practical use of the power distribution property if gains in electrical side about these change and most suitable investment way consist because there is necessity of electric power plan establishment of area electric power distribution place of business unit. This paper consider proper reliability level and maximum effect through quantitative analysis to gain electrical gains of the power distribution system in reliability side depending on trend DB(Data Base) of data of electric power system composition appliance in this treatise and apply data administration and reliability rate analysis that serve to decide most suitable investment precedence to supply of electric power property to power distribution system present investment algorithm.