• 제목/요약/키워드: inflection

검색결과 341건 처리시간 0.027초

S$m_2O_3-ZrO_2$계의 전기전도성 (Electrical Conductivity of S$m_2O_3-ZrO_2$ Systems)

  • 조정환;장금휘;김규홍;김용배;최재시
    • 대한화학회지
    • /
    • 제29권6호
    • /
    • pp.608-614
    • /
    • 1985
  • $ZrO_2$가 10, 20, 30, 40, 그리고 50 mol% 포함된 $ZrO_2-Sm_2O_3$계의 전기전도도를 500 ~ 1000$^{\circ}C$$10^{-5}~10^{-1}Po_2$ atm에서 측정하였다. 전기전도도를 온도의 함수로 도시한 결과 650$^{\circ}C$ 근처에서 온도의존성이 큰 고온영역과 적은 저온영역으로 구분되었으며 두 개의 각기 다른 결함구조를 보여 주었다. 전기전도도가 산소분압의 증가에 따라 증가하므로 P형의 전자성 반도체이며 고온영역에서 산소압력의존성은 ${\sigma}{\propto}Po_2^{1/5.3}$, 저온영역에서 ${\sigma}{\propto}Po_2^{1/6}$에 가까운 값을 나타냈다. ${\sigma}{\propto}Po_2^{1/5.3}$인 영역에서의 defect는 Oi"이며 ${\sigma}{\propto}Po_2^{1/6}$인 영역에서의 defect는 $Vs_m$"'이다. 고온영역에서 carrier type은 electron hole이며 저온영역에서는 이온성의 기여도가 있다. 이러한 이온성의 기여는 dopant의 양이 증가할 수록 커진다. 60mol% 가 포함된 $ZrO_2-Sm_2O_3$계에서는 전기전도도는 산소압력이 감소함에 따라 증가하였다.

  • PDF

방사선 치료 선량 계산을 위한 신경회로망의 적용 타당성 (A Feasibility Study on Using Neural Network for Dose Calculation in Radiation Treatment)

  • 이상경;김용남;김수곤
    • Journal of Radiation Protection and Research
    • /
    • 제40권1호
    • /
    • pp.55-64
    • /
    • 2015
  • 방사선치료계획장치의 핵심기술인 선량분포 계산은 빠르고 정확함을 요구한다. 기존 상용화된 치료계획장치의 선량 계산 방법은 빠르지만 정확성이 부족하고, 몬테칼로 방법은 시뮬레이션 시간과다 문제가 있다. 관심영역의 일부만 몬테칼로 방법이 계산하고 나머지 영역은 비선형함수사상 능력이 뛰어난 신경회로망이 계산하는 시스템은 상대적으로 빠르고 정확한 선량분포를 계산해낼 수 있다. 비균질 매질의 선량분포에 나타나는 불연속점과 변곡점의 특성을 신경회로망이 학습가능 하다는 것을 사전 작업을 통해 확인하였다. 이때 사용된 신경회로망은 Feedforward Multi-Layer Perceptron에 Scaled Conjugated Gradient 알고리즘과 Levenberg-Marquardt 알고리즘으로 각각 학습하여 성능비교를 하였고, 은닉층의 뉴런 개수에 따른 성능비교도 하였다. 마지막으로 균질매질의 팬텀에 대해 상용 치료계획장치의 선량계산 알고리즘으로 계산한 선량분포를 사전작업을 통해 확인된 신경회로망에 학습하여 깊이선량율의 평균제곱오차가 0.00214인 결과를 보여주었다. 균질 및 비균질 매질의 팬텀에 대한 3차원 선량분포를 계산하는 신경회로망 모델 개발 연구가 추가로 진행될 것이다.

Growth curve estimates for wither height, hip height, and body length of Hanwoo steers (Bos taurus coreanae)

  • Park, Hu-Rak;Eum, Seung-Hoon;Roh, Seung-Hee;Sun, Du-Won;Seo, Jakyeom;Cho, Seong-Keun;Lee, Jung-Gyu;Kim, Byeong-Woo
    • 농업과학연구
    • /
    • 제44권3호
    • /
    • pp.384-391
    • /
    • 2017
  • Growth curves in Hanwoo steers were estimated by Gompertz, Von Bertalanffy, Logistic, and Brody nonlinear models using growth data collected by the Hanwoo Improvement Center from a total of 6,973 Hanwoo (Bos taurus coreanae) steers 6 to 24 months old that were born between 1996 and 2015. The data included three parameters: A, mature size of body measurement; b, growth ratio; and, k, intrinsic growth rate. Nonlinear regression equations for wither height according to Gompertz, Von Bertalanffy, Logistic, and Brody models were $Y_t=144.7e^{-0.5869e^{-0.00301t}}$, $Y_t=145.3(1-0.1816e^{-0.00284t})^3$, $Y_t=143.1(1+0.7356e^{-0.00352t})^{-1}$, and $Y_t=146.8(1+0.4700e^{-0.00249t})^1$, respectively, while those for hip height were $Y_t=144.5e^{-0.5549e^{-0.00312t}}$, $Y_t=145.0(1-0.1724e^{-0.00295t})^3$, $Y_t=143.1(1+0.6863e^{-0.00360t})^{-1}$, and $Y_t=146.2(1+0.4501e^{-0.00263t})^1$, respectively. Equations for body length $Y_t=174.1e^{-0.8342e^{-0.00289t}}$, $Y_t=175.8(1-0.2500e^{-0.00265t})^3$, $Y_t=170.0(1+1.1548e^{-0.00363t})^{-1}$, and $Y_t=180.3(1+0.6077e^{-0.00215t})^1$, respectively, for the same models. Among the four models, the Brody model resulted in the lowest mean square error, with mean square errors of 31.79, 30.57, and 42.13, respectively, for wither height, hip height, and body length. Also, an estimated birth wither height, birth hip height, and birth body length (77.98, 80.57, and 70.97 cm, respectively) were lower in the Brody model than in other models. An inflection point was not observed during the growth phase of Hanwoo steer according to the growth curves calculated using Gompertz, Von Bertalanffy, and Logistic models. Based on the results, we concluded that the regression equation using the Brody model was the most appropriate among the four growth models. To obtain more accurate parameters, however, using data from a wider production period (from birth to shipping) would be required, and the development of a suitable model for body conformation traits would be needed.

하중증가율(荷重增加率)이 이차압밀(二次壓密)에 미치는 영향(影響) (The Influence of Load Increment Ratio on the Secondary Consolidation)

  • 지인택;강예묵
    • 농업과학연구
    • /
    • 제10권1호
    • /
    • pp.110-117
    • /
    • 1983
  • 본(本) 연구(硏究)는 쌍곡선법(雙曲線法)을 이용(利用)해서 하중(荷重) 증가율(增加率)이 이차압밀(二次壓密)에 마치는 영향(影響)을 구명(究明)하기 위하여, 아산만(牙山灣)의 해성점토(海成粘土)에 대(對)하여 시험(試驗)한 것으로 그의 결과(結果)를 요약(要略)하면 다음과 같다. 1. 쌍곡선법(雙曲線法)에 의(依)한 이차압밀량산정(二次壓密量算定) 값은 Casagrande의 log t 법(法)에 의(依)한 값보다 약간 작았으나, 그 차이(差異)는 미소(微小)하였고 쌍곡선법(雙曲線法)으로는 하중(荷重) 증가율(增加率)이 작을 때에도 쉽게 이차압밀량(二次壓密量)을 산정(算定)할 수 있었다. 2. 하중증가율(荷重增加率)이 작을수록 이차압밀비(二次壓密比)는 크게 나타났으며 하중증가율(荷重增加率)이 작을때 일어나는 심하곡선(沈下曲線)의 creep 현상(現象)은 이차압밀(二次壓密)에 기인(起因)한 것이라 생각된다. 3. 일차압밀중(一次壓密中)에 생기는 이차압밀(二次壓密)는 과압밀영역(過壓密領域)에서는 불규칙(不規則)했으나, 과압밀영역(過壓密領域)에서는 하중증가율(荷重增加率)이 작을수록 증가현상(增加現象)을 보였다. 4. 이차압밀계수(二次壓密係數)는 하중(荷重)의 증가(增加)에 따라 점차 증가(增加)하여 선행하중근처(先行荷重近處)에서 변곡점(變曲点)을 이루었고 하중(荷重)이 $2kg/cm^2$부터는 감소현상(減少現象)을 나타냈으며 이차압밀계수(二次壓密係數)는 하중증가율(荷重增加率)과 무관(無關)함을 보였다. 5. 이차압밀계수(二次壓密係數)와 압축지수(壓縮指數)는 비례관계(比例關係)를 나타냈다.

  • PDF

액화석유 가스 (L. P. G) 와 산소 혼합물의 폭발특성 및 점화조건에 관한 연구 (Detonation Characteristics of L. P. G /$O_2$Gas Mixture and the Self-Ignition Condition for the Formation of Detonative Wave)

  • 최성락;심규선;김은식;윤석승;김웅
    • 대한화학회지
    • /
    • 제30권4호
    • /
    • pp.394-402
    • /
    • 1986
  • 충격관을 사용하여 L.P.G./$O_2$혼합기체의 폭발반응에 대해 L.P.G. 농도 3~45 부피 % 범위에 걸쳐 조사하였다. 본실험조건하에서 폭발가능한 하한농도조건은 L.P.G.농도 3.4%, 상한농도조건은 40.0%로 측정되였다. L.P.G.농도가 증가함에 따라 폭발파속도는 증가하였으나 당량비조건(${\phi}$=1, L.P.G. 농도 17.2%)에서 변곡점을 나타내었으며 최대속도는 당량비보다 1.57배 큰 농도조건(${\phi}$=1.57)에서 2.65km/sec를 나타낸 후 다시 감소하는 경향을 나타내었다. 당량비근처에서 변곡점이 나타난 것은 L.P.G. 농도가 당량비보다 적은 조건과 당량비보다 큰 조건하에서 폭발반응메카니즘이 다른데에 기인하는 것으로 믿어진다. 또한 충격가열 방식을 사용하여 L.P.G./$O_2$ 조성비에 따른 자동점화 온도를 측정하였다. 폭발파를 형성시킬 수 있은 자동점화온도는 당량비조건에서 $742{\pm}3{\circ}K$의 최저값을 나타냈으며 당량비로 부터 벗어남에 따라 급격히 증가하는 경향을 나타냈다.

  • PDF

Converting Panax ginseng DNA and chemical fingerprints into two-dimensional barcode

  • Cai, Yong;Li, Peng;Li, Xi-Wen;Zhao, Jing;Chen, Hai;Yang, Qing;Hu, Hao
    • Journal of Ginseng Research
    • /
    • 제41권3호
    • /
    • pp.339-346
    • /
    • 2017
  • Background: In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. Methods: HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Results: Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. Conclusion: P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical basis for the development of a quality traceability system of traditional Chinese medicine based on a two-dimensional code.

경상분지 백악기 화산암류에 대한 암석화학적 고찰: 이원성 마그마의 가능성 (Petrochemical Study on the Cretaceous Volcanic Rocks in Kyeongsang Basin, Korea: Possibility of Magma Heterogeneity)

  • 성종규;김진섭;이준동
    • 자원환경지질
    • /
    • 제31권3호
    • /
    • pp.249-264
    • /
    • 1998
  • The Creataceous volcanic rocks distributed in the southeastern part (Kyeongsang basin) of Korea peninsula are composed of basalt, basaltic andesite, andesite, dacite and rhyolite. The variation of major elements show that contents of MgO, CaO, $FeO^T$, $Al_2O_3$, $TiO_2$ and $P_2O_5$ decrease with increasing of $SiO_2$, but $K_2O$ contents are increased slightly, $Na_2O$ widely dispersed. We can show slightly inflection point and low frequency of dacites in range between 63-65 wt.% $SiO_2$, while continuous trend exit in variation diagram. Variation trends in Harker diagrams for the major, minor, trace and REEs suggest that the BAV (basaltic to andesitic volcanics) and DRV (dacitic to rhyolitic volcanics) are not related to a simple crystal fractionation process. In the regime of under 65 wt. % in silica content, fractionation of olivine and clinopyroxene is predominant, while that of plagioclase happens strongly higher than 65 wt.% (e.g., $SiO_2$, vs. Eu and Sr, MgO vs. $Al_2O_3$ and CaO). The latter means low-pressure fractional crystallization for DRV. On the discriminant diagram, DRV are located in more mature environment than BAV. The $(Ce/Sm)_N$ vs. CeN digram shows that these two classes cannot be related to crystal fractionation. If they had been produced by fractionation, although they plotted in a slightly elongate cluster along the same horizontal trend, DRV should lie to the right of these primitive compositions. These diagrams clearly rule out a simple fractionation throughout from BAV to DRV. BAV had been influenced greatly subductiong slab as shown by K/Yb vs. Ta/Yb. We suggest that BAV primitive magma generated higher degree of partial melting than DRV primitive magma. LILE (K, Ba, $Rb{\pm}Th$) enriched characteristics as shown in BAV are inherited from subducting slab fluids and/or higher degree of partial melting of mantle material. However, lower degree of partial melting of mantle relative to BA V and contamination at high-level magma reservoir caused LILE enrichment to DRV.

  • PDF

[4-{4'-(니트로페닐아조)펜옥시카보닐}]알카노화 셀룰로오스들의 열방성 액정 거동 (Thermotropic Liquid Crystalline Behavior of [4-{4'-(Nitrophenylazo)phenoxycarbonyl}]alkanoated Celluloses)

  • 정승용;마영대
    • 폴리머
    • /
    • 제33권1호
    • /
    • pp.58-66
    • /
    • 2009
  • 셀룰로오스 트리[4-{4'-(니트로페닐아조)펜옥시카보닐}]알카노에이트들(NACEn, n=2$\sim$8,10, 유연격자 중의 메틸렌 단위들의 수)의 동족체들의 열방성 액정 특성을 검토하였다. 모든 동족체들은 단방성 네마틱 상들을 형성하였다. 액체 상에서 네마틱 상으로의 전이온도($T_{iN}$)는 n이 증가함에 따라 낮아지나 n이 7이상에서 거의 일정하게 되었다. $T_{iN}$에서의 엔트로피 변화와 n의 관계를 나타낸 그림 상에는 n=7에서 급격한 엔트로피의 감소가 관찰되었다. n=7에서 급격한 변화는 곁사슬 그룹의 배열의 차이에 의해 초래되는 것으로 생각된다. 용융온도($T_m$)와 $T_m$에서의 엔트로피 변화는 $T_{iN}$$T_{iN}$에서의 엔트로피 변화와 판이하게 뚜렷한 홀수-짝수 효과를 나타냈다. 이러한 사실은 네마틱 상과 결정 상에서의 곁사슬 그룹들의 평균적인 형태가 판이함을 시사한다. NACEn에서 관찰되는 네미틱상의 열적 안정성과 질서도는 아조벤젠 혹은 바이페닐 단위들을 곁사슬로 지닌 곁사슬형 그리고 복합형 액정 고분자 동족체들에 대해 보고된 결과들과 현저히 달랐다. 이들의 결과를 주사슬의 화학구조와 유연성, 주사슬과 곁사슬 그룹의 결합양식 그리고 반복단위당의 mesogenic 단위들의 수의 차이들의 견지에서 검토하였다.

생물학적 수소 발효를 통한 수처리 시스템 (Fermentative Water Purification based on Bio-hydrogen)

  • 이정열;진설교;민경석
    • 한국물환경학회지
    • /
    • 제27권6호
    • /
    • pp.926-931
    • /
    • 2011
  • 유기성폐수의 혐기발효 공정은 빠른 수소생성속도를 나타내며, 동시에 수중의 유기물을 처리한다. 반면, 수소생성 수율이 낮고 처리 수 내 혐기발효 산물인 복합 유기산이 다량 존재하게 된다. 따라서, 본 실험에서는 수소생성 수율을 높이고 처리수의 수질 제고를 위해 광발효미생물을 이용하였다. 광발효미생물의 기질에 따른 수소생산 속도 및 미생물 성장율을 조사하기 위해 아세트산, 복합 유기산 (인공) 및 글루코스 대상 혐기발효 상등액을 각각 기질로 이용하는 회분식 실험을 실시하였다. 아세트산을 이용한 R. sphaeroides의 최대 비증식속도는 2.93 h로서 복합유기산을 이용할 때보다 높았다. 아세트산은 미생물 증식에 유리한 기질인 반면, 수소생산속도 면에서는 복합유기산보다 느리게 나타났다. 글루코스 혐기 발효액 상등액을 기질로 이용한 광발효에서 전단의 혐기발효를 통한 수소생산량의 약 50%가 추가로 발생하였다. 혐기 및 광발효미생물의 혼합발효 연속시스템을 통해 $15.9mL-H_2/L$의 안정적인 수소를 생산하였다.

폴리비닐피롤리돈 첨가제를 이용한 폴리설폰막의 제조 및 특성 분석 (Preparation and Characterization of Polysulfone Membranes Using PVP as an Additive)

  • 이진영;이근우;한명진;박소진
    • 공업화학
    • /
    • 제22권3호
    • /
    • pp.277-285
    • /
    • 2011
  • 상전환법을 이용하여 폴리설폰, n-메틸피롤리돈과 폴리비닐피롤리돈으로 이루어진 제막용액으로부터 고분자 분리막이 제조되었다. 폴리비닐피롤리돈은 폴리설폰에 대한 고분자 첨가제로서 제막용액에 첨가되었으며, 침지용 비용매로는 물이 사용되었다. 첨가된 폴리비닐피롤리돈은 제막용액의 열역학적 상분리를 촉진하는 역할을 할 수 있음을 보였으며, 유동성을 급격히 감소시키는 특성을 보였다. 제조된 막들은 전형적인 비대칭성 구조를 보이며, 첨가제 없는 경우와 비교하였을 때 폴리비닐피롤리돈 함량이 5 wt%가 첨가된 경우 모두 손가락 기공이 약간 더 크게 나타났으며, 10 wt% 이상에서 손가락 기공의 크기가 줄고 표면 고분자 알갱이층의 두께가 뚜렷하게 증가하는 것으로 나타났다. 동일한 폴리비닐피롤리돈 함량에서는 폴리설폰의 함량이 높을수록 손가락 기공의 형성이 시작되는 곳이 표면으로부터 멀리 떨어지는 것으로 나타났다. 표면기공도는 고분자 첨가제를 포함하지 않고 제조된 막의 경우 폴리설폰 함량이 낮을수록 기공도가 크게 나타났다. 폴리설폰 함량이 같을 때 물투과도는 폴리비닐피롤리돈의 함량 증가에 따라 선형으로 변하지 않고 변곡특성을 보였다. 폴리설폰 함량 12 wt%에서 최대 물투과도는 폴리비닐피롤리돈 5 wt%이었을 때 나타났으나, 폴리설폰 함량이 18 wt%이었을 때 최대 투과도는 폴리비닐피롤리돈 함량이 15 wt%일 때 나타났다.