• 제목/요약/키워드: inflammable

검색결과 76건 처리시간 0.023초

자동차 실내 인화성물질과 전기과부하에 의한 화재관련 사례 연구 (A Study for Examples of Fire including with Combustible Substance and electrical overload in Automotive Inside Room)

  • 한재오;함성훈;임하영;이일권
    • 한국가스학회지
    • /
    • 제18권3호
    • /
    • pp.38-43
    • /
    • 2014
  • 이 논문은 자동차 실내의 인화성 물질과 전기적인 접촉 불량에 의한 화재사례를 분석하고 연구하는 것이다. 첫 번째 사례는 운전자가 에어컨 냄새 탈취제인 방향제를 사용 후 실내의 크래쉬 패드에 두고 내린 것이 외부의 복사열에 의해 폭발하면서 화재가 발생된 것으로 확인되었다. 두 번째 사례는 운전자가 자동차 실내에 전자기기 등을 사용하면서 전기적인 과부하가 걸려 단락현상에 의해 화재가 발생된 것으로 확인되었다. 세 번째 사례는 자동차 내부의 시트를 따뜻하게 하기 위해 열선을 설치하였다. 초기에 설치하였을 때는 화재의 위험성이 약했으나 5,000km를 운행하면서 이 열선의 내구성이 떨어지면서 순간적으로 전기적인 과부하가 발생되었고, 이 열이 시트에 옮겨 붙으면서 자동차 화재가 발생된 것으로 확인되었다. 네 번째 사례는 뒷좌석에 있던 승객이 담배를 피우던 중 완전히 소화하지 않은 상태로 둔 것이 가연성 종이에 옮겨 붙어 자동차가 전소된 것으로 확인되었다. 따라서, 실내의 인화성 물질이나 전기적인 시스템을 추가로 사용할 때는 화재가능성을 최대한 고려하고 이에 대한 세심한 대책을 강구하여야 한다.

합판(合板)의 내화처리(耐火處理)에 관(關)한 연구(硏究) - III. 제1인산(第一燐酸)암모늄처리합판(處理合板)의 내화도(耐火度) (Studies on Plywood Treated Fire-Retardant - III. The Fire-Retardant Degree of Monoammonium Phosphate Treated Plywood)

  • 김종만
    • Journal of the Korean Wood Science and Technology
    • /
    • 제14권4호
    • /
    • pp.21-28
    • /
    • 1986
  • Plywood used for construction as a decorative inner material is inflammable and can fire accident, causing destruction of human life and property. In this study, 3.5mm Kapur plywoods were soaked in the 23% monoammonium phosphate solutions by cold soaking method 3, 6, 9hrs and hot-cold bath method for 3/3hrs, and redrying was carried out by press-drying at the platen temperature of 110, 130, 160, 180$^{\circ}C$, and then fire test was carried out to investigate burning point, flame exhausted length, frame spread length, back side carbonized area and weight loss. The results are as follows; 1. In cold soaking method for 3, 6, 9hrs. retentions of monoammonium phosphate were 0.377, 0.448, 0.498kg/(30cm)$^3$ respectively, and in hot-cold bath method for 3/3hrs, the retention was 1.331kg(30cm)$^3$ that exceeded the minimum retention 1.124kg/(30cm)$^3$. 2. Correlation coefficients among the variable were shown in table 2. From the table, it could be recognized that there were close negative correlations between the treatment and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, and there was negative correlation between treating time and back side carbonized area, but there was positive correlation between platen temperature and burning point. 3. From table 3, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carhonized area, weight loss between treatments. And in 2-way interactions, there were also highly significant for burning point, flame spread length, flame exhausted time, weight loss between time x treatment. 4. It was observed that burning point, flame exhausted time, flame spread length, back side carbonized area, and weight loss in fire-retardant treated plywood were the best effects in fire-retardant treated plywood, water treated plywood and nontreated plywood. In conclusion, I can estimate that absorbed chemical contents by hot-cold bath method for 3/3hrs, have a lot of effects on fire-retardant factors such as burning point, flame spread length, flame exhausted time, backside carbonized area and weight loss, but platen temperatures have a little effects on the fire factors.

  • PDF

벤진의 유해 위험성과 작업환경 노출기준 연구 (A Study on the Hazardousness and the TLV in Working Environments of Benzine)

  • 김현영;이성배;한정희;신재훈
    • 한국산업보건학회지
    • /
    • 제16권3호
    • /
    • pp.233-244
    • /
    • 2006
  • Of many volatile organic detergents for metals, benzine(CAS No. 8030-30-6), of which the toxicity has not yet been proven, has been used as an alternative of the halide compounds in the consideration of toxic effects, global warming and the destruction of ozone layer. In order to evaluate the effects of the benzine on human body by investigating the subchronic inhalation toxicity, to obtain the basic data for establishing the criteria of exposure in working environments and to classify the hazardousness in compliance with the Industrial Safety and Health Act by evaluating the hazardousness, repeated inhalation exposure test was carried with SD rats. The rats were grouped by 10 females and males each. The repetitive inhalation exposures were carried out at 4 levels of concentration of 0 ppm, 60 ppm, 300 ppm, and 1,500 ppm, for 6 hours a day, 5 days a week, for 13 weeks. The results are described hereunder. 1. No death of the animals of the exposed and controlled groups in the test period. Not any specific clinical symptoms, change in feed intake quantity, abnormality in eye test, or change in activity were observed. 2. In the 300 ppm and 1,500 ppm groups, weight reduction in the female groups and weight increase of liver and kidney in the male groups compared with control group were observed with statistical significance(p<0.05). 3. In the blood test, the HCT increased in the male 300 ppm group and the number of hematocyte increased, MCV and MCH decreased in the male 1,500 ppm group. In the female 1,500 ppm group, the HB decreased and the distribution width of the hematocyte particle size increased. In the blood biochemistry test, the TP in the male 1,500 ppm group and the LDH in the female 1,500 ppm group were increased with statistical significance(p<0.05). 4. Under the test conditions of the present study with SD rats, the NOEL was evaluated to be from 60 ppm to 300 ppm for both male and female groups. By extrapolation, the NOEL for human who work 8 hours a day was evaluated to be from 128 ppm to 640 ppm 5. Since the NOEL evaluated in this study do not exceed 60ppm(0.184 mg/L) the test material does not belong to the classification of the hazardous substance "NOEL${\leq}$0.5mg/L/6hr/90day(rat), for continuous inhalation of 6hours a day for 90 days" nor to the basic hazardous chemical substance class 1(0.2 mg/L/6hr/90day(rat) defined by the GHS which is a criteria of classification and identification of chemical compounds. However, considering the boiling point($30-204^{\circ}C$), flashing point($-40^{\circ}C$), vapor pressure(40 mmHg), and the inflammable range(1.0 - 6.0 %), sufficient care should be taken for handling in the safety aspects including fire or explosion.

森林內 落葉層의 含水量과 담뱃불에 의한 可燃性 (Moisture Content of Litter Layer and Its Combustibility by Cigarette Light in Forests)

  • 김관수;장인수;김수정
    • The Korean Journal of Ecology
    • /
    • 제17권1호
    • /
    • pp.1-9
    • /
    • 1994
  • 본 연구는 산불의 근원이 된다고 하는 담배불에 의한 연소형태의 특징을 구명하고 그 현상을 해명하여 산불 방지대책의 연구자료로 기여하자는데 있다. 국산 담배 종류별 흡연자를 조사한 결과 흡연량은 개당 30mm였고, 흡연하고 버려지는 담배의 길이는 30mm정도여서 꽁초의 자연연소시간은 약 10분이 소요된다. 삼림내 퇴적층은 평균 58.2mm였고, 퇴적물량은 인간간섭이 적은 선치산이 고우언화된 계룡산에 비하여 29.6%가 더 많다. 임내 지상 가연물량은 Pinus rigida, Quercus acutissmia, Larix leptolepis등은 수세가 왕성한 15년생과 20년생 조림지에서 가연물량이 평균 2.43kg과 2.55kg으로 다소 많았다. 가연물의 착화 및 발염상태는 함수량 2~6%의 시료(C)의 Zoysia japonica와 Populus X tomentiglandulosa는 5분 이내에 발염되고, 침엽수종인 Pinus rigida와 Larix leptolepis는 착화되어 불씨는 만들어지나 자체발염은 되지 않았으며, Zoysia Japonica와 Populus X tomentiglandulosark 함유되는 혼합고엽의 시료에서는 모두 발염되어 담배둘에 의한 산불은 Zoysia japonica와 같은 건초가 가장 위험한 화원이 되겠다.

  • PDF

옥외저장탱크 누출, 폭발 및 화재사고 대응방안에 관한 고찰 (The Study on the Countermeasure Plans about Leakage, Explosion and Fire Accidents of Atmospheric Storage Tank)

  • 이갑규
    • 한국화재소방학회논문지
    • /
    • 제30권6호
    • /
    • pp.48-56
    • /
    • 2016
  • 지난 2014.4.4.(금)14:50, 울산소재 대형 옥외저장탱크에 원유 충전 중 누출사고가 발생하여 사고현장에 긴급구조통제단이 가동됐다. 사고업체, 소방기관 및 유관기관이 지휘소에 모여 대응과 수습방안을 논의한 뒤 전원차단 및 시설작동금지, 가스농도 측정, 유증기 발생 억제, 누출 원유를 타탱크와 공정과정으로 이송, 해양오염 방지조치 등의 협업체계를 구축하여 수습하였다. 이 수습과정에서 유증기 발생방지와 점화원 차단을 가장 중시하여 조치함으로써 사고업체와 소방기관이 가장 우려했던 폭발과 화재사고는 발생하지 않았다. 이에 본 연구는 일반적인 재난의 긴급구조통제단과는 달리 운영해야 할 옥외탱크의 유류 누출, 폭발 및 화재 시의 긴급구조통제단 운영체계개선을 제시하고, 옥외탱크 유류 누출로 인한 폭발과 화재사고로 전이했을 경우를 가정한 방유제 바닥 종류에 따른 화염 확산속도와 연소시간을 실험 비교하였다. 또한, 소방차 포 노즐의 방사각도와 펌프압력에 따른 방사거리와 포의 도포면적을 실험 분석하여, 이후 옥외저장탱크의 유류 누출로 인한 폭발과 화재 시를 대비한 효과적인 현장대응과 수습방안을 제시하는 데 중점을 두었다.

제2인산(第2燐酸)암모늄 처리합판(處理合板)의 약제흡수(藥劑吸收) 및 열판건조(熱板乾燥)에 관(關)한 연구(硏究) (Studies on the Press Drying and the Chemical Absorption of the Plywood Treated with Diammonium Phosphate)

  • 김종만
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권4호
    • /
    • pp.39-45
    • /
    • 1995
  • The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

  • PDF

실물화재실험을 통한 공동주택의 화재안전성 연구 (The Real Scale Fire Test for Fire Safety in Apartment Housing)

  • 유용호;권오상;김흥열
    • 한국화재소방학회논문지
    • /
    • 제23권5호
    • /
    • pp.57-65
    • /
    • 2009
  • 본 연구에서는 화재 시 많은 인명피해가 예상되는 공동 주택을 대상으로 단위공간별 화재 성상을 예측하기 위한 실물화재실험을 실시하였다. 실험 모델 주택을 구성하고 있는 내부 가연물을 선정한 후 각 단위 품목에 대한 화재특성 실험을 실시하였으며, 주방, 거실, 침실, 공부방 등 4종류의 단위 공간으로 구분하여 각각 실물화재실험을 실시하였다. 실험결과 침실의 경우 점화 후 약 5분이 경과되었을 때 플래쉬오버 상태에 이르게 되어 매우 급격한 성장을 보였으며, 최대 열방출율 약 7,433.3kW, 최대 CO 578.6ppm, 최대 $CO_2$ 1.25%, 내부 최대온도 $1,350^{\circ}C$로 측정되었다. 특히, 화재 발생 초기에 가연 공간에서 화재의 진화가 이루어지지 않으면 약 3분 내에 인체에 급격한 피해를 줄 수 있는 한계온도 이상으로 화재가 성장하기 때문에 신속한 초기 대응이 필요함을 확인하였으며, 장롱, 침구류 등 비교적 화재가 급속히 전이 될 수 있는 가연물량이 다수 배치되어 있는 침실에서 용도별 가연 공간 중 가장 위험도가 높은 것으로 측정되었다. 단위 가연물에서 발생되는 유독가스가 임계수준 이상으로 발생되어 이로 인해 인체에 심각한 피해를 줄 수 있을 것으로 판단된다. 이러한 실물화재실험에서 얻어낸 결과는 향후 화재확대 예측 시뮬레이션 결과와 비교함으로써 각 용도별 공간에서의 화재 확산 예측에 적용될 수 있을 것이다.

Ecological Green Roofs in Germany

  • Kohler, Manfred
    • 한국환경복원기술학회지
    • /
    • 제7권4호
    • /
    • pp.8-16
    • /
    • 2004
  • The industrialization of central Europe more than 100 ago marked the beginning of densely concentrated buildings in quickly growing cities. A cheap type of roofing material of that time was tar. But it was dangerous because it was high inflammable. Then some roofer had a splendid idea. They used sandy material as a final layer atop the impermeable tar layer. These roofs were much more fire resistant than the typical roofs. In this sandy layer some plant species began to grow spontaneously. This was the beginning of the green roof history of modern Europe. A number of these green roofs survived both world wars. In the early 80's in Berlin alone, 50 such buildings existed and they continued to be waterproof until the present day. Since the 1992 Earth Summit of 1992 in Rio de Janeiro(http://www.johannesburgsummit.org/html/basic_info/unced.html) the term "sustainable development" became of central interest of urban designers. In city regions green roofs had become synonymous with this term. With a small investment, long-lasting roofs can be created. Further back in history, more exciting examples of green roofs can be found. The hanging gardens of antiquity are well-known. There are also green roofs built as insulation against cold and heat all over the world. For over 20 years, roof greening in central Europe has been closely examined for various reasons. Roof greening touches several different disciplines. Of primary interest is the durability of the roofs. But ecologists are also interested in green roofs, for instance in biodiversity research. The beneficial effect of greening on water proofing was also proven. For some time, the issue of fire protection was investigated. According to tests, green roofs received a harsh careful rating. Their fire protective property is considered similar to that of tile roofs. Another recent impulse for the green roof movement in Germany has come from the evident improvement of storm water retention and the reduced burden on the sewer system. The question of whether and how much energy green roofs can save has become an urgent question. The state of the research and also various open questions from a central European point of view will be discussed in the context of international collaboration. Apart from academic considerations, those who involve themselves in this issue take a predominantly positive view of the numerous existing green roofs in Germany. In some cities, green roofs are the typical construction technique for new buildings. A few outstanding examples will conclude this review. In Germany, about 20 companies, some of which operate internationally, specialize in green roof consulting. Learning from each other in an open-ended way with respect to different construction techniques and applications in various climatic regions can only be accomplished through such international collaboration as is taking place here.

$3.2\;{\mu}m$ 중적외선 센서를 이용한 메탄가스누출검지기의 개발 (Development of Methane Gas Leak Detector Using Mid-infrared Ray Sensors with $3.2\;{\mu}m$)

  • 박규태;유근준;한상인;오정석;김지윤;안상국;윤명섭;권정락
    • 한국가스학회지
    • /
    • 제12권2호
    • /
    • pp.48-52
    • /
    • 2008
  • 산업의 성장으로 가스사용량이 증가함에 따라 가스설비, 화학플랜트 등 시설 또한 점차로 증가하고 있으나, 가스에 대한 안전관리는 여전히 미흡한 실정이다. 공장과 가정에서 많이 사용되고 있는 메탄은 천연가스의 주성분으로 가연성이면서 폭발성가스이어서 그에 대한 안전관리도 매우 중요하다. 그 한 가지 방안으로 $3.2\;{\mu}m$ 중적외선 영역의 LED 및 PD를 이용하여 메탄가스누출검지시스템을 개발하고자 한다. 이 파장대역의 센서로 레이저를 이용할 경우 고열이 발생하여 초저온 냉각장치가 필요하나 LED는 상온에서 동작함으로 냉각장치가 필요 없다. 그래서 초소형이나 휴대용으로 구현이 가능하다. $3.2\;{\mu}m$ 부근의 파장대역은 $1.67\;{\mu}m$에 비하여 메탄흡수강도가 강하여서 극미량의 가스탐지가 가능하고 응답성 또한 빠르다. 본 연구에서는 이를 상용화하여 매설 및 노출배관 등 가스설비의 가스누출을 보다 정확하고 신속히 검지함으로써 사고를 미연에 방지하고 그 피해를 최소화하고자 한다.

  • PDF

교육시설 화재위험성 평가를 위한 기초조사에 관한 연구 (A Study on the Basic Investigation for the Fire Risk Assessment of Education Facilities)

  • 이성일;함은구
    • 한국재난정보학회 논문집
    • /
    • 제17권2호
    • /
    • pp.351-364
    • /
    • 2021
  • 연구목적: 교육시설 화재위험성 평가를 위한 기초 데이터 확보를 위하여 화재하중 분석하였다. 사전조사로 화재하중을 산정하기 위해 학교시설의 화재하중과 관련된 기초자료를 수집하였다. 연구방법: 기초자료는 화재하중의 정의 및 종류, 화재하중 산정을 위한 연소열 데이터 화재하중에 대한 선행연구를 통하여 진행하였고 화재하중 산출시 구획실에 존재하는 가연물 중량에 해당 연소열을 곱하여 산정하였다. 연구결과: A 초등학교의 고정가연물은 교실, 음악실, 교무실은 정서나 안전을 고려하여 바닥이 주로 목재로 이루어져 있었으며, 나머지 구획실은 석재로 이루어졌다. 천장과 벽은 석고보드, 콘크리트로 되어있어 가연물에 속하지 않았다. 각 실별로 대표적인 적재가연물은 교실은 책상, 의자, 사물함 등으로 나타났으며 과학실은 실험기구함, 실험도구함이 주를 이루어었으며 도서실은 책과 서가, 열람기구 등이 큰 비중을 차지하였다. 결론: A 초등학교의 적재가연물에 따른 적재화재하중은 도서실, 컴퓨터실, 영어학습실, 교무실, 일반교실, 과학관, 음악실의 순으로 나타났다.