• 한국농공학회논문집
• /
• 제53권4호
• /
• pp.11-19
• /
• 2011

PADDIMOD2 was deloped to estimate nonpoint source pollution from paddy rice fields. The PADDIMOD2 was enhanced to estimate runoff and pollutant load during non-growing as well as growing season and to be easily used for public by development of Excel based system. Nutrient concentration and hydrology were based on Dirac delta function and continuous source function, and tank model for growing season and Event Mean Concentrations (EMCs) and SCS-Curve Number method for non-growing season. The PADDIMOD2 consists of three main component (input data, parameters data, and output data) by including eight Excel spread sheets. As a result of model application, total precipitation and irrigation were 1,051.7 mm and 439.2 mm, respectivley and surface runoff and water loss including infiltration and evapotranspiration were 463.0 mm and 947.9 mm, respectively. Annual nutrient loadings of T-N and T-P from study area were 6.7 kg/$km^2$/day and 0.5 kg/$km^2$/day, respectively. Development of PADDIMOD2 was focused on minimizing input data and maximizing user friendly system and is expected to be useful tool to evaluate various non-structure BMPs and estimate unit load from paddy rice fields for application at Korean TMDL.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.378-383
• /
• 2013

Continuous fiber-reinforced ceramic matrix composites (CFCCs) have a complex distribution of porosity, consisting of interfiber micro pores and interbundle/interply macro pores. Owing to the complex geometry of the pores and fiber architecture, it is difficult to obtain representative microstructural features throughout the specimen volume with conventional, destructive ceramographic approaches. In this study, we introduce X-ray computed microtomography (X-ray ${\mu}CT$) to nondestructively analyze the microstructures of disk shaped and tubular $SiC_f$/SiC composites fabricated by the chemical vapor infiltration (CVI) method. The disk specimen made by stacking plain-woven SiC fabrics exhibited periodic, large fluctuation of porosity in the stacking direction but much less variation of porosity perpendicular to the fabric planes. The X-ray ${\mu}CT$ evaluation of the microstructure was also effectively utilized to improve the fabrication process of the triple-layered tubular SiC composite.

• Geomechanics and Engineering
• /
• 제9권1호
• /
• pp.101-113
• /
• 2015

Saturated soil hydraulic conductivity is a very important soil parameter in numerous practical engineering applications, especially rainfall infiltration and slope stability problems. This parameter is difficult to measure since it is very highly sensitive to various soil conditions. There have been many analytical and empirical formulas to predict saturated soil hydraulic conductivity based on experimental data. However, there have been few studies to investigate in-situ hydraulic conductivity of weathered granite soils, which constitute the majority of soil slopes in Korea. This paper introduces an estimation method to derive saturated hydraulic conductivity of Korean weathered granite soils using in-situ experimental data which were obtained from a variety of slope areas of South Korea. A robust regression analysis was performed using different physical soil properties and an empirical solution with an $R^2$ value of 0.9193 was suggested. Besides that this research validated the proposed model by conducting in-situ saturated soil hydraulic conductivity tests in two slope areas.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.160-165
• /
• 2016

To increase the capacitance of an Al electrolytic capacitor, the anodic oxide film, $Al_2O_3$, was partly replaced by an $Al_2O_3-ZrO_2$ (Al-Zr) composite film prepared by the vacuum infiltration method and anodization. The microstructure and composition of the prepared samples were investigated by scanning electron microscopy and transmission electron microscopy. The coated and anodized samples showed multi-layer structures, which consisted of an inner Al hydrate layer, a middle Al-Zr composite layer, and an outer $Al_2O_3$ layer. The thickness of the coating layer could go up to 220 nm when the etched Al foil was coated 8 times. The electrical properties of the samples, such as specific capacitance, leakage current, and withstanding voltages, were also characterized after anodization at 100 V and 600 V. The capacitances of samples with $ZrO_2$ coating were 36.3% and 27.5% higher than those of samples without $ZrO_2$ coating when anodized at 100 V and 600 V, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.111-111
• /
• 2010

최근 전자 소자의 집적기술은 기존의 2차원에서 System on package (SOP) 개념에 기반을 둔 3차원 집적 기술로 발전 되어가고 있다. 소자의 3차원 실장을 실현시키는 과정에서 세라믹의 여러 유용성이 언급되어져 왔지만, 취성이 매우 크다는 등의 단점이 있었다. 이러한 이유로 연성을 가지는 폴리머와 세라믹을 합성한 복합체 기판에 대하여 많은 연구가 되고 있다. 그러나 세라믹 제작을 위해서는 높은 공정온도가 요구되고 있고 이러한 높은 공정상에서의 온도는 3차원 실장에 있어서 문제점이 되고 있다. 이러한 문제점을 극복하기 위하여 상온에서 치밀한 세라믹 후막을 제작할 수 있는 공정인 Aerosol Deposition Method (ADM)방법으로 세라믹-폴리머 후막의 제조를 시도하였다. 일반적으로 ADM은 수백 나노의 출발 파우더를 사용하여 치밀한 세라믹 막을 형성하는데 사용된다. 본 연구에서는 ADM으로 100 nm미만의 나노 세라믹 파우더를 사용하여 다공성의 세라믹 후막을 제조한 후 resin을 함침시키는 방법으로 세라믹-폴리머 후막의 제조를 시도하였다. 그 결과 운송가스, aerosol 농도 등의 공정조건을 변화시켜 다공성의 $Al_2O_3$ 후막을 제조하였고, 이 다공성 후막은 반투명의 특성을 보이며 고충전율로 형성되었다. 이렇게 제조된 나노 다공성 $Al_2O_3$ 후막에 cyanate ester resin을 함침시키는 방법을 사용하여 $Al_2O_3$-cyanate ester 복합체 후막을 제조하였으며, 이의 비유전율 및 품질계수는 각각 1 MHz에서 6.7, 1000으로 우수한 유전특성을 보임이 확인되었다.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.391-396
• /
• 2009

2-dimensional silica-silica Continuous Fiber-reinforced Ceramic.matrix Composites (CFCCs) were fabricated by a sol-gel infilitration method that has a changing processing condition, such as the repetitions of infilitration. In order to investigate the relationship between the processing condition and the mechanical properties of composites, the mechanical properties of specimens were measured by means of a 4-point flexural strength test while the evidence of strength degradation were microstructurally characterized. There seemed to be a minimum density value that existed at which the delamination between the fabrics would not occur. In the case that the density of silica CFCCs exceeded 1.55 g/$cm^3$, the flexural strength also exceeded approximately 18 MPa at least. By applying the Minimum Solid Area (MSA) analysis of the porous structure, the correlation between the relative density and the mechanical properties of composites will be discussed.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2104-2113
• /
• 2002

A finite element model is developed for the process of squeeze casting of metal matrix composites (MMCs) in cylindrical molds. The fluid flow and the heat transit. are fundamental phenomena in squeeze casting. To describe heat transfer in the solidification of molten aluminum, the energy equation is written in terms of temperature and enthalpy are applied in an axisymmetric model which is similar to the experimental system. A one dimensional flow model simulates the transient metal flow. A direct iteration technique was used to solve the resulting nonlinear algebraic equations, using a computer program to calculate the enthalpy, temperature and fluid velocity. The cooling curves and temperature distribution during infiltration and solidification were calculated fer pure aluminum. Experimentally, the temperature was measured and recorded using thermocouple wire. The measured time-temperature data were compared with the calculated cooling curves. The resulting agreement shows that the finite element model can accurately estimate the solidification time and predict the cooling process.

• 생명과학회지
• /
• 제15권6호
• /
• pp.1034-1036
• /
• 2005

배추 종자 및 유묘에 대하여 GUS발현 또는 hepatitis B surface antigen (HBsAg)발현 벡터를 지니는 Agrobacterium tumefaciens LBA4404 세포를 이용하여 진공침윤(agroinfiltration)에 의한 형질전환을 시도하였다. 특히 ELISA를 이용한 HBsAg발현의 정량적 분석에서 agroinfiltration방법은 형질전환효율이 매우 저조하게 나타났다. 그러나 차아염소산나트륨 용액을 발아 전 또는 발아 중인 배추종자에 처리한 후 agroinfiltration을 실시한 경우 형질전환 효율이 $2\~5$배 증가하였다. 따라서 차아염소산나트륨 등의 화학연마제에 의한 종자의 상처발생이 Agrobacterium의 감염을 용이하게 함으로써 배추유묘에서의 일시유전자발현을 증대시키는 것으로 제안되고있다.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.218-226
• /
• 2015

The goal of this study is to investigate a metal cladding that contains SiC composites as a protective layer and analysis the characteristics of the specimens on high temperature oxidation To make SiC composites, the current process needs a high temperature (about $1100^{\circ}C$) for the infiltration of fixing materials such as SiC. To improve this situation, we need a low temperature process. In this study, we developed a low temperature process for making SiC composites on the metal layer, and we have made two kinds: cladding with protective SiC composites made by polycarbosilane(PCS), and a PCS filling method using supercritical carbon dioxide. A corrosion test at $1200^{\circ}C$ in a mixed steam and Ar atmosphere was performed on these specimens. The result show that the cladding with protective SiC composites have excellent oxidation suprression rates. This study can be said to have developed new metal cladding with enhanced durability by using SiC composite as protective films of metal cladding instead of simple coating film.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.31-44
• /
• 2019

The main objective of this research is to develop a hydroclimate drought index (HCDI) using the gridded climate data inputs in a Variable Infiltration Capacity (VIC) modeling platform. Typical drought indices, including, Standardized Precipitation Index (SPI), Standardized Precipitation Evapotranspiration Index (SPEI), and Self-calibrated Palmer Drought Severity Index (SC-PDSI) in South Korea are also used and compared. Inverse Distance Weighting (IDW) method is applied to create the gridded climate data from 56 ground weather stations using topographic information between weather stations and the respective grid cell ($12km{\times}12km$). R statistical software packages are used to visualize HCDI in Google Earth. Skill score (SS) are computed to evaluate the drought predictability based on water information derived from the observed reservoir storage and the ground weather stations. The study indicates that the proposed HCDI with the gridded climate data input is promising in the sense that it can help us to predict potential drought extents and to mitigate its impacts in a changing climate. The longer term drought prediction (e.g., 9 and 12 month) capability, in particular, shows higher SS so that it can be used for climate-driven future droughts.