• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.483-490
• /
• 2015

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. It is shown that it is possible to do likelihood inference for software reliability models based on finite failure model and non-homogeneous Poisson Processes (NHPP). For someone making a decision about when to market software, the conditional failure rate is an important variables. The infinite failure model are used in a wide variety of practical situations. Their use in characterization problems, detection of outlier, linear estimation, study of system reliability, life-testing, survival analysis, data compression and many other fields can be seen from the many study. Statistical process control (SPC) can monitor the forecasting of software failure and thereby contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, proposed a control mechanism based on NHPP using mean value function of Musa-Okumo and Power law type property.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2070-2079
• /
• 1997

In this paper, we proposed the FNCAC (fuzzy neural call admission control) scheme of the ATM networks which used the benefits of fuzzy logic controller and the learning abilities of the neural network to solve the call admission control problems. The new call in ATM networks is connected if QoS(quality of service) of the current calls is not affected due to the connection of a new call. The neural network CAC(call admission control) system is predictable system because the neural network is able to learn by the input/output pattern. We applied the fuzzy inference on the learning rate and momentum constant for improving the learning speed of the fuzzy neural network. The excellence of the proposed algorithm was verified using measurement of learning numbers in the traditional neural network method and fuzzy neural network method by simulation. We found that the learning speed of the FNCAC based on the fuzzy learning rules is 5 times faster than that of the CAC method based on the traditional neural network theory.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.63-74
• /
• 1999

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration of large structures. Rule-base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the nonlinear control algorithms. Fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation. Non-linearity of the control rule makes the controller more effective than linear controllers. Design procedure based on the present fuzzy control is more convenient than those of the conventional algorithms based on complex mathematical analysis, such as linear quadratic regulator and sliding mode control(SMC). Robustness of presented controller is illustrated by examining the loop transfer function. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator-structure interaction, modeling error, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as $H_{mixed 2/{\infty}}$ optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is an efficient and attractive control method, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient.

• Journal of The Korean Association For Science Education
• /
• v.17 no.3
• /
• pp.323-332
• /
• 1997

In order to use analog more systematically in science class, an instructional model was designed on the basis of analogical reasoning processes (encoding, inference, mapping, application, and response) in the Sternberg's component process theory. The model has five phases (introducing target context, cue retrieval of analog context, mapping similarity and drawing target concept, application, and elaboration), and the instructional effects of using the model upon students' comprehension of science concepts and motivation level of learning were investigated. The treatment and control groups (1 class each) were selected from 8th-grade classes and taught about chemical change and chemical reaction for the period of 10 class hours. The treatment group was taught with the materials based on the model, while the control group was taught in traditional instruction without using analog. Before the instructions, modified versions of the Patterns of Adaptive Learning Survey and the Group Assessment of Logical Thinking were administered, and their scores were used as covariates for students' conceptions and motivational level of learning, respectively. Analogical reasoning ability test was also administered, and its score was used as a blocking variable. After the instructions, students' conceptions were measured by a researcher-made science conception test, and their motivational level of learning was measured by a modified version of the Instructional Materials Motivation Scale. The results indicated that the adjusted mean score of the conception test for the treatment group was significantly higher than that of the control group at .01 level of significance. No significant interaction between the instruction and the analogical reasoning ability was found. Although the motivational level of learning for the treatment group was higher than that for the control group, the difference was found to be statistically insignificant. Educational implications are discussed.

• The Korean Journal of Physiology
• /
• v.9 no.1
• /
• pp.57-61
• /
• 1975

A study was designed to clarify the influence of the hippocampus upon tolerance by electric shock. Forty-eight male rats were used, of which 14 rats had their hippocampal tissue on both sides removed through an opening in the parieto-occipital cortex (hippocampal group), 17 rats received damage to the parieto-occipital cortex only (cortical control group), and 17 rats served as normal control animals. After 24 hours' fasting with water ad libitum, each animal was restrained on a plate with added electric shock (4 mA A.C., 1.5 sec in a duration, and once per minute in average) to the tail for the last 24 hours without food and water. The mortality in each animal group and the mean survival time of the dead animal during the repitition of electric shock were calculated. Results obtained were as follows: 1. The mortality was lower significantly in the hippocampal group than in the two control groups. 2. The mean survival time of the dead animal was longer insignificantly in the hippocampal group than in the two control groups. The inference from the above results is that the hippocampus exerts a inhibitory influence upon tolerance by electric shock.

• YAKHAK HOEJI
• /
• v.53 no.5
• /
• pp.274-280
• /
• 2009

To survey the status of quality control of major ingredients of 'Ssanghwatang (Oriental medicine used for fatigue)', we analyzed 1,024 samples (9 kinds) of medical herbs to determine amounts of ashes, acid-insoluble ashes, loss on drying that are major elements to ensure basic quality of herbal drugstuffs. After ash analysis, Paeoniae Radix (from China) failed to meet the herbal standard criterion. After yielding Z-score(indicating the probability of exceeding its criterion) Zizyphi Fructus, Zingiberis Rhizoma, Paeoniae Radix, Rehmanniae Radix Preparata became objects of intense quality control (=IQC). Analysis on loss on drying shows Cinnamomi Cortex was unsuitable and was put under the IQC. In case of respective heavy metals, Angelicae Gigantis Radix, Cnidii Rhizoma, Cinnamomi Cortex exceeded the maximum permissible range for Cd. The 3 kinds of sub-standards were put to the IQC. Statistic figures showed a significant correlation (t-test, p<0.01) between country-of-origin and sub-quality rates. Compared to domestic one, imported medicinal herbs were less suitable in regard of acid-insoluble ash, loss on drying and Pb/Hg content. Meanwhile, amounts of Acid-insoluble ash showed positive relation with amounts of Pb (r=0.202) and As (r=0.243) among heavy metals leading to an inference that herbs of which root/rhizome is used for medical purposes attribute its high heavy metal content to the fine earth/sand being stuck to its root stalk.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.563-569
• /
• 2015

A chemical reaction occurring in CSTR (Continuous Stirred Tank Reactor) is significantly affected by the concentration, temperature, pressure, and reacting time of materials, and thus it has strong nonlinear and time-varying characteristics. Also, when an existing linear PID controller with fixed gain is used, the performance could deteriorate or could be unstable if the system parameters change due to the change in the operating point of CSTR. In this study, a technique for the design of a fuzzy PD plus I controller was proposed for the temperature control of a CSTR process. In the fuzzy PD plus I controller, a linear integral controller was added to a fuzzy PD controller in parallel, and the steady-state performance could be improved based on this. For the fuzzy membership function, a Gaussian type was used; for the fuzzy inference, the Max-Min method of Mamdani was used; and for the defuzzification, the center of gravity method was used. In addition, the saturation state of the actuator was also considered during controller design. The validity of the proposed method was examined by comparing the set-point tracking performance and the robustness to the parameter change with those of an adaptive controller and a nonlinear proportional-integral-differential controller.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.208-221
• /
• 2019

The inference for this research was concentrated on client's data protection in cloud computing i.e. data storages protection problems and how to limit unauthenticated access to info by developing access control model then accessible preparations were introduce after that an access control model was recommend. Cloud computing might refer as technology base on internet, having share, adaptable authority that might be utilized as organization by clients. Compositely cloud computing is software's and hardware's are conveying by internet as a service. It is a remarkable technology get well known because of minimal efforts, adaptability and versatility according to client's necessity. Regardless its prevalence large administration, propositions are reluctant to proceed onward cloud computing because of protection problems, particularly client's info protection. Management have communicated worries overs info protection as their classified and delicate info should be put away by specialist management at any areas all around. Several access models were accessible, yet those models do not satisfy the protection obligations as per services producers and cloud is always under assaults of hackers and data integrity, accessibility and protection were traded off. This research presented a model keep in aspect the requirement of services producers that upgrading the info protection in items of integrity, accessibility and security. The developed model helped the reluctant clients to effectively choosing to move on cloud while considerate the uncertainty related with cloud computing.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1231-1238
• /
• 2004

By virtue of the advanced Internet technology, there are lots of research works for e-Logistics which means virtual business activities or service architecture based on the Internet among the logistics companies. Because e-Logistics environment requires more dynamic and global service area, conventional vehicle monitoring and control technologies innate many problems in terms of Integrating, storing and sharing the location data. It needs the development of the moving object technology in order to resolve efficiently the limitations. In this paper, we propose the whole components of the moving object management system which supports the advanced sharing the location information as well as the integration of location data. We are sure the suggested system can be adopted to construct the next generation-logistics vehicle monitoring and control system by reducing the overall cost and time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.305-309
• /
• 2006

The important field of research on ship operation is related to the high efficiency of transportation, the convenience of maneuvering ships and the safety of navigation. For these purposes, many intelligent technologies for ship automation have been required and studied. As a way of practical application for a smart ship based on network system, this paper proposes the intelligent control system for ship steering gear based on TCP/IP and desires to testify the validity of the proposal by applying the fuzzy control model to the steering gear system. As study method, the fuzzy inference was adopted to build the maneuvering models of steersman and then the network system was implemented using the TCP/IP Socket programming. Lastly, the miniature steering control system was designed to testify for its effectiveness.