• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.745-752
• /
• 2007

In this study, the effects of flexible bodies in vehicle suspension components were investigated to enhance the accuracy of multibody dynamic simulation results. Front and rear suspension components were investigated. Subframes, a stabilizer bar, a tie rod, a front lower control arm, a front knuckle, and front struts were selected. Reverse engineering techniques were used to construct a virtual vehicle model. Hard points and inertia data of the components were measured with surface scanning equipment. The mechanical characteristics of bushings and dampers were obtained from experiments. Reaction forces calculated from the multibody dynamics simulations were compared with test results at the ball joint of the lower control arm in both time-history and range-pair counting plots. Simulation results showed that the flexibility of the strut component had considerable influence on the lateral reaction force. Among the suspension components, the flexibility of the sub-frame, steering knuckle and upper strut resulted in better correlations with test results while the other flexible bodies could be neglected.

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.461-476
• /
• 2015

Rankine's theory of earth pressure cannot be directly employed to c-${\phi}$ soils backfill with a sloping ground subjected to complex loadings. In this paper, an analytical solution for active earth pressures on retaining structures of cohesive backfill with an inclined surface subjected to surcharge, pore water pressure and seismic loadings, are derived on the basis of the lower-bound theorem of limit analysis combined with Rankine's earth pressure theory and the Mohr-Coulomb yield criterion. The generalized active earth pressure coefficients (dimensionless total active thrusts) are presented for use in comprehensive design charts which eliminate the need for tedious and cumbersome graphical diagram process. Charts are developed for rigid earth retaining structures under complex environmental loadings such as the surcharge, pore water pressure and seismic inertia force. An example is presented to illustrate the practical application for the proposed coefficient charts.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.457-469
• /
• 2016

Steep rock slope with water-filled tension crack will happen to overturn around the toe of the slope under seismic loading. This failure type is completely different from the common toppling failure occurring in anti-dipping layered rock mass slopes with steeply dipping discontinuities. This paper presents an analytical approach to determine the seismic factor of safety against overturning for an intact rock mass slope with water-filled tension crack considering horizontal and vertical seismic coefficients. This solution is a generalized explicit expression and is derived using the moment equilibrium approach. A numerical program based on discontinuous deformation analysis (DDA) is adopted to validate the analytical results. The parametric study is carried out to adequately investigate the effect of horizontal and vertical seismic coefficients on the overall stability against overturning for a saturated rock slope under two water pressure modes. The analytical results show that vertically upward seismic inertia force or/and second water pressure distribution mode will remarkably decrease the slope stability against overturning. Finally, several representative design charts of slopes also are presented for the practical application.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.37-46
• /
• 2017

This paper is concerned with the numerical study on the resonance response of a rigid spar-type floating platform in coupled heave and pitch motion. Spar-type floating platforms, widely used for supporting the offshore structures, offer an economic advantage but those exhibit the dynamically high sensitivity to external excitations due to their shape at the same time. Hence, the investigation of their dynamic responses, particularly at resonance, is prerequisite for the design of spar-type floating platforms which secure the dynamic stability. Spar-type floating platform in 2-D surface wave is assumed to be a rigid body having 2-DOFs, and its coupled dynamic equations are analytically derived using the geometric and kinematic relations. The motion-variance of the metacentric height and the moment of inertia of floating platform are taken into consideration, and the hydrodynamic interaction between the wave and platform motions is reflected into the hydrodynamic force and moment and the frequency-dependent added masses. The coupled nonlinear equations governing the heave and pitch motions are solved by the RK4 method, and the frequency responses are obtained by the digital Fourier transform. Through the numerical experiments to the wave frequency, the resonance responses and the coupling in resonance between heave and pitch motions are investigated in time and frequency domains.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권3호
• /
• pp.295-302
• /
• 2020

The paper aims to investigate the impact of foreign direct investment (FDI) on private investment with a sample having 49 developing countries in Asia (17 countries) and Africa (32 countries) during the period of 1990-2017. Unlike previous studies, we split the data into three groups for further analysis, including the Asian, African and the full-panel samples. The results confirm a crowding-in effect which shows that foreign direct investment promotes private investment on all three research samples. Besides, the lagged private investment has a positive and significant effect on itself in the next period which reflects the inertia in the trend of private investment in recipient countries. In the full-panel sample, there are some macro factors such as GDP per capita, trade openness, and electricity that also have a positive and statistically significant impact on private investment. Besides, when more deeply estimate with smaller samples, we find that trade openness and labour force have a positive and significant in Africa, on the other hand, not in Asia. However, the domestic credit variable has a negative and significant effect on private investment only in Asian developing countries. Furthermore, there is only a positive and significant impact of the electricity variable on private investment in Asia.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.765-767
• /
• 2001

Linear pulse Motors(LPM) are widely used in fields where smooth linear motion is required, and their position accuracy is higher than other motors. Hybrid linear pulse motors(HLPM) are regarded as an excellent solution to positioning problems that require high accuracy, rapid acceleration and high-speed. The LPM has low mechanical complexity, high reliability, precise open-loop operation and low inertia etc. in many application areas such as factory automation speed positioning, computer peripherals and numerically controlled machine tools. This motor drive system is especially suitable for machine tools the high position accuracy and repeatability. This paper describes about that need of the embroider machine, we want to design position-scanning device for the embroidery machine. At first, to be analysed characteristics of the machine and next designed the LPM. we used the field analysis program, The finite element method(FEM) program tool is employed for calculation the force. The reluctance models will be used the magnetic permeance of air gap by static- conditions. The forces between forcer and platen have been calculated using the virtual work method.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.100-107
• /
• 2001

One major problem in the model testing is the boundary effect and size effect caused by the limit in the size of the container. To overcome this problem, various types of laminar boxes are gradually manufactured and used in the shaking table test, which ideally has zero stiffness to horizontal shear. In this study, a small-scale laminar box is manufactured, which is composed of 6 thin aluminum rectangular hollow plates, and its inside dimensions are 300 mm length by 200 mm width by 350 mm depth. Shaking table tests are performed both with the laminar box and the rigid box under the same conditions, where displacements and accelerations are measured at various points of the box and model ground. As result of analyzing the measured data, during the propagation of input seismic motion from the bottom to the ground surface, the relative displacement of the model ground and the amplification of acceleration is hardly amplified in the rigid box. Because of the effect of stress waves reflecting from the rigid wall, the acceleration is slightly decreased at the edge in the rigid box. The laminar box, manufactured in this study, has a problem in that the soil behavior at the edge of ground surface is affected by the inertia force of the top layer due to its excessive self-weight.

• 전산구조공학
• /
• 제8권1호
• /
• pp.95-106
• /
• 1995

지하철의 운행에 의한 소음과 진동은 운행로 주위의 주민을 괴롭히는 중요한 요소의 하나이다. 일반적인 건물의 진동은 횡방향의 진동을 많이 고려하고 있으나 지하철의 운행에 의한 건물의 진동은 수직방향의 진동을 주요하게 다루어야 한다. 수직방향의 진동을 고려하기 위한 구조물은 보의 진동이 고려된 모델이어야 한다. 따라서 구조물의 수평방향 진동을 고려하기 위하여 사용된 모델은 수직방향의 진동을 고려하기 위한 모델과 같이 사용될 수 없다. 건물의 수직진동을 고려한 해석을 수행하기 위해서는 보의 관성력을 충분히 고려할 수 있는 모델이 사용되어야 한다. 본 논문에서는 지하철의 운행에 의한 구조물의 수직방향진동을 고려하기 위한 구조물의 해석 모델기법에 대하여 연구한 결과 기둥의 경우 하나이상 보의 경우 두개 이상의 요소로 나누어 해석하는 것이 바람직한 것으로 나타났다.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.128-144
• /
• 1998

일반적인 선형 탄성해석 경계 요소법이 초 고속 회전과 정상 열전도에 의한 열 탄성 효과가 고려된 문제에 적용되었다. 축대칭 경계 요소법 구성이 요약되었고, 등가 경계 적분 방정식의 물체력 핵 함수의 체적 적분 전환방법에 일반화된 내적과 벡터 연산법 개념이 도입되었다. 고차 경계 요소 적용을 위한 이산화 수치 해석법이 요약되었고, 소형 젯트 엔진(ADD 500)의 터어빈 로우터 디스크의 해석 결과가 유한 요소해와 비교되었다.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.951-961
• /
• 2001

The present article presents an extension to the computational model for spray/wall interaction and liquid film processes that has been dealt with in the earlier studies (Lee and Ryou, 2000a). The extensions incorporate film spread due to impingement forces and dynamic motion induced by film inertia to predict the dynamic characteristics of wall films effectively. The film model includes the impingement pressure of droplets, tangential momentum transfer due to the impinging droplets on the film surface and the gas shear force at the film surface. Validation of the spray/wall interaction model and the film model was carried out for non-evaporative diesel sprays against several sources of experimental data. The computational model for spray/wall interactions was in good agreement with experimental data for both spray radius and height. The film model in the present work was better than the previous static film model, indicating that the dynamic effects of film motion should be considered for wall films. On the overall the present film model was acceptable for predication of the film radius and thickness.