• 한국콘텐츠학회논문지
• /
• 제21권4호
• /
• pp.434-446
• /
• 2021

최근 들어, 산업뿐만이 아니라 사회 전반적으로 큰 영향을 미칠 것으로 예상되는 4차 산업 혁명에 대한 관심이 커지고 있다. 하지만 4차 산업의 공간적 분포와 관련한 연구는 제한적이었다. 이에 본 연구는 비지리적 방법인 LQ와 지리적 방법인 Getis-Ord's Gi^*를 이용하여 4차 산업의 공간적 분포를 유형화하고 집적지를 도출하였다. 분석결과를 종합하면 다음과 같다. 첫째, 4차 산업의 "특화지역"은 수도권 지역의 비율이 높으나, 산업유형에 따라 비수도권 지역에서도 확인되었다. 둘째, 4차 산업의 "클러스터"와 "주변 지역"은 대부분 수도권에 군집하여 형성되어 있었다. 셋째, 수도권 지역 내에서도 4차 산업 "클러스터"는 과밀억제권역과 경기남부지역에 편중되어 나타났으며, 수도권 북부지역과 자연보전권역은 소외된 양상을 보였다. 본 논문은 4차 산업의 "클러스터" 지역이 수도권 지역에 집중되어 있으며 이러한 특징을 반영한 정책적 대안이 필요함을 보여주고 있다.

• 경영과학
• /
• 제34권1호
• /
• pp.15-25
• /
• 2017

We evaluated industry growth and employment effects of every possible pairs of 22 manufacturing sectors and 16 regions (i.e, 352 region-sectors). We used annual data of manufacturing sectors from 2008 to 2014 for the evaluation. The evaluation comprises of two steps; We first find several region-sectors that outperform others with respect to the effects of industry growth and employment, which are measured by location quotient analysis, shift share method, employment to GDP ratio and employment elasticity. In addition, cross-efficiency analysis follows to classify region-sector pairs into two sub-categories : efficient region-sectors that deserve to hold the current level of investments and inefficient region-sectors where we should consider efficiency improvements. To examine the efficiency, R&D investment, employment size, and capital investment were used as input factors and production volume, added value, changes in employment size, changes in annual salary per capita were used as output factors. For region-sector pairs that have outstanding growth and employment effects but are inefficient, we employed a CCR DEA model and analyzed how much to adjust the values of input and output factors to improve the efficiency scores. The analysis results showed that inefficiency is mainly due to several factors such as R&D investment, changes in employment size and changes in annual salary per capita.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.149-157
• /
• 2008

The reduction of leakage is a major issue of the South Korea water industry. The inclusion of pressure dependent leakage terms in network analysis allows the application of optimization techniques to identify the most effective means of reducing water leakage in distribution networks. This paper proposes a method to find optimal setting and location of control valve for reducing leakage efficiently. The proposed search method differs from previous methods for addressing optimal valve location problem and improves the GA simulation time with guaranteeing for getting the global optimal solution. The strength of this method has been demonstrated by means of case studies. This allows the procedure of optimization to be more robust and computational efficient.

• Journal of Information Processing Systems
• /
• 제19권4호
• /
• pp.407-416
• /
• 2023

In order to effectively relieve the traffic pressure of the city, ensure the smooth flow of freight and promote the development of the logistics industry, the selection of appropriate port logistics location is the basis of giving full play to the port logistics function. In order to better realize the selection of port logistics, this paper adopts the entropy weight method to set up a multi-dimensional evaluation index, and constructs the evaluation model of port logistics location. Then through the actual case, from the environmental dimension and economic competition dimension to make choices and analysis. The results show that port d has the largest logistics competitiveness and the highest relative proximity among the three indicators of hinterland city economic activity, hinterland economic structure, and port operation capacity of different port logistics locations, which has absolute advantages. It is hoped that the research results can provide a reference for the multi-dimensional selection of port logistics site selections.

• 지역연구
• /
• 제39권3호
• /
• pp.13-34
• /
• 2023

제주도는 전국 1% 수준에 불과한 지역내총생산(GRDP)을 증가시키고자 기업 육성 및 유치를 위해 다각적인 노력을 지속하고 있다. 기업의 입지 선택은 기업 성장에 영향을 미칠 수 있는 중대한 결정이다. 한 지역에 기업 입지가 집중된다면 그것은 그 지역 특성이 기업 이윤극대화에 도움이 된다는 것을 의미한다. 따라서, 기업이 선호하는 지역의 특성을 분석하고 그것을 기업 유치 정책에 반영할 수만 있다면 지역의 혁신과 발전을 유도하는데 도움이 될 것이다. 이에 본 연구는 제주지역 기업들의 입지분포를 살펴보고, 조건부 로짓 모형을 이용하여 제주도 읍면동별 지역 특성이 기업 입지 결정에 미치는 영향을 분석하였다. 분석 결과, 업종과 무관하게 제주지역 모든 기업은 다양한 업종의 기업이 밀집되어 있고, 경제활동인구가 많고, 인구밀도가 낮으며, 대중교통 혼잡도가 낮은 지역의 입지를 선호하는 것으로 나타났다. 그리고, 지식기반산업에 속한 기업은 동종기업들이 많이 위치한 지역을 선호하는 것으로 나타나, 집적 외부성을 중시하는 지식기반산업 특징이 제주지역 기업들에게도 나타나고 있음을 확인할 수 있었다. 본 연구는 그간 전무 하였던 제주지역을 대상으로 한 기업 입지 요인분석으로, 향후 제주지역의 기업·산업 육성 및 지역 발전 정책 수립을 위한 기초분석을 실시하였음에 의미를 찾을 수 있겠다.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.63-69
• /
• 2005

The purpose of this study is to evaluate the differences of visual effects by variations in the location of the waistline and the width of the round belt of the basic skirt. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 43 fashion design majors. The data has analyzed by frequency, factor analysis, anova, scheffe's test and the MCA method. The results of this study are as follows. The visual effects by variations of the location of the waistline and the width of the belt are composed of 3 factors: the shape of the front part of the abdomen, the shape of the side part of the abdomen, and the length of the upper body. The visual effects by variations of the width of the belt have partial significant differences. The visual effects by variations in the location of the waistline have significant differences in all factors. The interaction effects between the location of the waistline and the width of the belt have not significant differences in all factors.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.84-92
• /
• 2015

Fillers have been used to improve the optical and printing properties and to reduce the production cost while increasing the filler content in paper causes adverse effects on paper strength. In the previous study, it was shown that the thick stock addition of filler can increase the filler content without significantly sacrificing paper strength. This study was carried out to elucidate the effect of the location of starch addition (before or after the filler addition) on handsheet properties and a papermaking process as a part of developing the thick stock loading technology. In addition, effects of dual flow addition of cationic starch were evaluated. It was found that paper strength was superior when cationic starch was added after the filler addition. No adverse effects on optical properties, formation and filler retention were observed. Drainage was a bit slower when starch was added after the filler addition, which shall be resolved with regulating other factors. Dual flow addition of cationic starch before and after filler addition did not show any special advantage.

• 한국멀티미디어학회논문지
• /
• 제19권3호
• /
• pp.612-619
• /
• 2016

Applying evolved IT technology to increase the satisfaction of the consumer is a typical feature of the rapidly transformed service industry. Smart devices have taken a place as the mainstream of major media, moreover, IT service strategies utilizing smart devices have been constantly developed. Location recognition method of users has been proposed as one of the significant features to the IT service industry. The long-term care home services can be one example of user location recognition methods that real time computerization of service record utilize an attached tag to home of pensioners with RFID reader or an NFC function of mobile when a home carer provides service. And, the Homecare Electronics Management System (HEMS) and the various location recognition methods will be discussed to improve effectiveness of services. In this paper, we propose a home applicable electronic management system which insurer, home care service facilities, home cares, pensioners and guardians which enables to simultaneously check service records based on the improved system by use of iBeacon.

• 디지털산업정보학회논문지
• /
• 제9권2호
• /
• pp.41-54
• /
• 2013

In this paper, We collected location based services of the user's past moving paths through the GPS. Using the collected by location-based services through the analysis of the similarity between the user's of service level agreement recommended of mobile contact area(SLA) proposed that can be. S-RCA method based on Service Level Agreement of the users in order to provide the service user's path distance, time, and to predict the direction of the movement paths and collect. The data collected by the interests and requirements of users through classification with the same interests and the needs of users to move between the analysis of the similarity between the path is used to analyze the results of analysis of the path-specific tolerance range (distance, time, and space) is determined according to the difference in the contact area. From a small area of the error range for users first to recommended and through their smartphones recommended contact area (S-RCA) to meet with the other party to make a choice of recommended methods. We verify through experiments that proposed method(S-RCA) a valid and reliable mobile contact area were recommended.

• 산업공학
• /
• 제21권2호
• /
• pp.229-236
• /
• 2008

Recently, ubiquitous computing paradigm considers as a tool for making innovation and competitive strength in manufacturing industry like other industries. Particularly, the location-based service that enables us to trace real-time logistics make effective management of schedules for inventory control, facilities and equipments, jobs planning, and facilitate the processes of information management and intelligence, which relate with ERP and SCM in organizations. Our study tries to build the location-based system for products of semiconductors in manufacturing place and suggests the good conditions and effective tracking procedures for positions of products. Our study show that the system is good for the saving of time in tracking products, however, it has to be improved in terms of accuracy. The study verifies the application of RFID technology in manufacturing industry and suggests the improvement of photograph process through RFID. In addition, our research introduces the future operation of FAB in semiconductors' processes that relate with real-time automation and RFID in manufacturing company.