• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.64-70
• /
• 2019

Wireless sensors have been developed in numerous ways for enhancing the convenience of installation, management and maintenance of sensors. Energy harvesting wireless sensors, which can collect energy from the external environment for permanent usage without the need of recharging and exchanging batteries, have been developed and employed used in Internet of Things and at various industrial sites. Energy harvesting wireless sensors are significantly affected by the sensor lifespan to sudden variation in the external environment. Furthermore, reduction in the sensor operating timespan can greatly affect the characteristics of the devices connected through a network. In this paper, a system performance index is proposed that can comprehensively evaluate the lifespan of a solar cell wireless sensor, determine the characteristics of devices connected to the associated network, and recommend dynamic power distribution control for improving the system performance index. Improvement in the system performance index was verified by applying the proposed dynamic power distribution control to an air conditioner network system using a solar cell wireless sensor. Obtained results corroborate that the dynamic power distribution control can extend the lifespan of the incorporated wireless sensor and reduce the air conditioner's power consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.379-387
• /
• 2008

We proposed models that can implement RFID/USN in terms of teaching-learning part, facility management part, teacher and student management part in primary and secondary school in this study. To support these models in school network, we also proposed a new wired network model and a new wireless network model. A new wired network model is derived from existing wired school network that can apply to all sorts of models presented above. And also a new wireless network model is derived from existing wireless LAN that can solve space restriction problem. We calculated communication bandwidth according to school size and network capacity.

• IE interfaces
• /
• v.23 no.3
• /
• pp.246-256
• /
• 2010

As wireless and mobile technologies have advanced significantly, lots of large sized healthcare organizations have implemented so called mobile hospital (m-Hospital) which provides a location independent and point of care (POC) clinical environment. Implementation of m-Hospital enhances quality of care because health professionals such as physicians and nurses can use hospital information systems at the very place where patients are located without any delay. This paper presents a real-time patient monitoring system based on wireless network technologies. A general framework for the patient monitoring process is introduced and the architecture and components of the proposed monitoring system is described. The system collects and analyzes biometric signals of in-patients who suffer from cancer. Specifically, it continuously monitors oxygen saturation of patients in bed and alarms health professionals instantly when an abnormal status of the patient is detected. The monitoring system has been used and clinically verified in a university hospital.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.299-300
• /
• 2008

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.377-382
• /
• 2007

Mobile ad hoc network(MANET) is a kind of wireless network which has no infrastructure. Each component node of MANET can move freely and communicate based on wireless peer to peer mode. Because of its vulnerable routing protocols, MANET is exposed to many kinds of attacks. A sinkhole attack is one of the representative attacks in MANET caused by attempts to draw all network traffic to a sinkhole node. This paper focuses on the sinkhole problem on Dynamic Source Routing(DSR) protocol in MANET. To detect the sinkhole node, we extract several useful sinkhole indicators through analyzing the sinkhole problem, then propose an efficient detection method based on an incremental learning algorithm. The simulation results show that the proposed method is effective and reliable for detecting sinkhole intrusion.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.507-511
• /
• 2008

Supporting energy efficiency and load balancing in wireless sensor network is the most important issue in devising the hierarchical routing protocols. Recently, the dual layered clustering scheme with GPS was proposed for the supporting of load balancing for cluster heads but there would be many collided messages in the overlapped area between two layers. Thereby, the purpose of this paper is to reduce the collision rate in the overlapped layer by concisely distinguish them with the same number of nodes in them. For the layer partition, this paper uses an equation $x^2+ y^2{\le}(\frac{R}{\sqrt{2\pi}})^2$ to distinguish layers. By using it, the scheme could efficiently distinguish two layers and gets the balanced number of elements in them. Therefore, the proposed routing scheme could prolong the overall network life cycle about 10% compared to the previous two layered clustering scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.291-295
• /
• 2014

This paper presents the implementation of industrial wireless network for real-time control system and the performance evaluation on the implemented system. We propose the hybrid network architecture of wired EtherCAT and wireless 802.15.4e. For performance evaluation, we use the reference model of inverse pendulum system. Through the performance evaluation on our testbed system, it is verified that our proposed system can be applied to industrial real-time control system.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.189-198
• /
• 2001

In recent years, the predominant part in telecommunications is mobile communications. The next generation network is extending today's voice-only mobile networks to multi-service networks. ATM Network is possible to carry such multi-media traffic and it will be expect to use wireless ATM for the future mobile access network. One of manly important aspects for the performance of wireless ATM is the Medium Access Control (MAC) protocol. The MAC protocol must be able to satisfyingly handle the different ATM services (CBR, VBR, ABR and UBR) with their radically different performance requirements. Additionally, the MAC protocol must be able to cope with the complex radio environment where fading, multi-path propagation interference and burst-errors further complicate the situation. In this paper, a dynamic slot allocation algorithm in wireless ATM is proposed for an efficient channel sharing/media access at the MAC layer. We use equivalent capacity in the allocation of slots for VBR traffic which is variable along the time. It is simple and effective slot allocation method for VBR service. In particular, we consider the slot allocation of a session consisted of several connections for requirement of multimedia traffic. Simulation shows that the cell loss ratio is reduced by re-allocation of extra slots in Mobile Terminal (MT).

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.245-250
• /
• 2008

Recently, mobile devices have supported wireless LAN as well as bluetooth, where the services such as heterogeneous network access and seamless mobility connection are important. Even though the mobility and physical network might be varied, an efficient communication mechanism for the network access and a robust mobility management of mobile devices are needed. In this paper, we design and implement a Bluetooth system with mobile LAN access capability. The proposed system has the following features; 1) IP connection is enabled by BENP in the link layer, 2) The networks devices of heterogeneous mobile devices are integrated into a single virtual network interface, 3) IP mobility between the bluetooth and wireless LAN is supported by mobile IP. The experimented results show that the packet loss and delay time during the handover duration is reduced by predicting the handover among different networks followed by the setup of any required parameters in advance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.360-361
• /
• 2006

This paper describes a wire and wireless network sensor for temperature and humidity measurements. The network sensor comprises PLC(Power Line Communication) and RF transmitter(433MHz) for acquiring an internal (on-board) sensor signal, and measured data is transmitted to a main processing unit. The network sensor module is consist of MEMS sensor, 10-bit A/D converter, pre-amp., gain-amp., ADUC812 one chip processor and PLC/RF transmitting unit. The temperature and humidity sensor is based on MEMS piezoelectric membrane structure and is implemented by using dual function sensor for smart home and smart building.