• Mycobiology
• /
• v.33 no.2
• /
• pp.84-89
• /
• 2005

Five types of agricultural wastes were used for the production of xylanolytic enzyme by Aspergillus flavus K-03. All wastes materials supported high levels of xylanase and ${\beta}-xylosidase$ production. A high level of proteolytic activity was observed in barley and rice bran cultures, while only a weak proteolytic activity was detected in corn cob, barley and rice straw cultures. Maximum production of xylanase was achieved in basal liquid medium containing rice barn as carbon source for 5 days of culture at pH 6.5 and $25^{\circ}C$. The xylanolytic enzyme of A. flavus K-03 showed low thermostability. The times required for 50% reduction of the initial enzyme activity were 90 min at $40^{\circ}C$, 13 min at $50^{\circ}C$, and 3 min at $60^{\circ}C$. Xylanolytic activity showed the highest level at pH $5.5{\sim}10.5$ and more than 70% of the original activity was retained at pH 6.5 and 7.0. The higher stability of xylanolytic enzymes in the broad range of alkaline pH is useful for utilization of the enzymes in industrial process requiring in alkaline conditions. Moreover, the highest production of xylanolytic enzyme was obtained when 0.5% of rice bran was supplied in basal liquid medium. SDS-PAGE analysis revealed a single xylanase band of approximately 28.5 kDa from the culture filtrates.

• Resources Recycling
• /
• v.12 no.5
• /
• pp.3-9
• /
• 2003

In order to prospect current recycling status in Korea, legislative system and policies relating to recycling, wastes generation and recycling rate were reviewed. Approximately 260,400 ton/day of wastes was generated in 2001. 48,400 ton/day of household waste and 212,000 ton/day of industrial waste. During the last ten years, waste management laws such as waste disposal law, recycling law and environment friendly industry law were prepared. In this article, concerning over waste generation and recycling, recycling law, Extended Producer Responsibility System and the problems and technological developments associated with recycling were summarized.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.109-115
• /
• 2002

This research was performed to investigate the COD removal efficiency and methane production in slurry-typed swine wastes using UASB(upflow anaerobic sludge blanket)reactor. The USAB reactor was operated from 0.8 through 3.3days of HRT in a range of 3 to 15 kg $TCOD/m^3/day$ of volumetric organic loading rate. The removal rate of TCOD was increased with the increase of the HRT. The removal rate of TCOD at an HRT over 2days, became greater than 68% with the methane contents being from 70 to 80%. Methane production rates were increased from 0.27 to $0.36m^3\;CH_4/kg$ CODrem. as HRTs were increased from 0.8 to 3.3days.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.888-893
• /
• 1998

Calcium sulfoaluminate, $C_4$A$_3$$\bar{S}$, was prepared for reutilizing industrial by-products, such as II-CaSO$_4$, Al(OH), CaF$_2$ and cement sludge wastes. Mixed powder was fired at 1,15$0^{\circ}C$. $C_4$A$_3$$\bar{S}$ clinkers fired at 1,15$0^{\circ}C$ were analyzed by SEM and XRD. Also were added in cement paste and mortar and characterized as setting time, flow values and compressive strength. $C_4$A$_3$$\bar{S}$ could be found in the X-ray diffraction pattern. The setting time of cement pastes added clinkers fired at 1,15$0^{\circ}C$ was shorter than that of ordinary portland cement. Also the compressive strengths of the cement mortar added clinkers was higher than those of ordinary portland cement.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.131-137
• /
• 2016

In unlimited competition era changed rapidly, productivity improvement and raw cost reduction by working improvement are very important for the survival of middle and small-sized companies. At this moment, middle and small-sized companies are cleary important in domestic industry. Therefore, this researcher applied TPS(Toyota production system) 7 wastes by experiment planning method for wastes of lots of working processes at the manufacturing site of automobile assembly manufacturing company, D company, analyzed current system of D company applied so as to verify if value creation works and factors were minimized during the production and drew results by analyzing experimental planning for analyzing waste elimination.

• Journal of Korea Trade
• /
• v.24 no.7
• /
• pp.93-106
• /
• 2020

Purpose - This paper aims to examine the environmental effects of South Korean foreign trade, and the changing relationship between industrial "three wastes" emissions and foreign trade. Design/methodology - Based on time series data of South Korean foreign trade and industrial "three wastes" from 2009 to 2019, a VAR model was used to analyze the long-term internal links and dynamic changes between foreign trade and environmental pollution. Findings - Variance decomposition analysis shows that for the three types of pollutants, self-impact contributes the most to the variance decomposition. It follows that South Korean foreign trade has a certain negative impact on the environment, and this impact has a certain sustainability. Originality/value - This paper contributes to the study on the relationship between foreign trade and environmental pollution. It theoretically proposes a coordinated development path for foreign trade development and green development based on the environmental impact of foreign trade, to provide a reference for the development of collaborative promotion.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.139.1-139
• /
• 2003

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.78-85
• /
• 2007

This study provides an attempt to evaluate sanding wastes, generated from a chemical company as a reused adsorbent. Organic impurities in the raw sanding wastes were removed by calcination at $550^{\circ}C$. Aluminum was a major inorganic composition in the raw sanding wastes and increased from 29.09% to 52.73% after calcination. Dissolved concentrations of heavy metals from the calcined sample were below 0.3 mg/L in a stability test at pH 2. From the pH-edge adsorption experiments with the calcined sanding wastes, As (V) was found to follow an anionic-type adsorption. Adsorption isotherm obtained with variation of the dosage of the calcined sanding wastes was better described by Freundlich equation than Langmuir one. Freundlich constants of K and 1/n were 4.244 and 0.316, respectively. The As (V) adsorption capacity of calcined sanding wastes estimated from Langmuir isotherm was 13.25 mg/g. From this study, the calcined sample was identified as a good reusable adsorbent in the view point of stability and adsorption capacity on As (V).

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.369-374
• /
• 2004

Calcium sulfoalumiante(CSA) was prepared for using natural calcite($CaCO_3$) and industrial by-products and wastes, such as $Al(OH)_3,\;CaSO_4{\cdot}2H_2O$. The mixture of raw materials was fired at 20, 400, 600, $1200^{\circ}C$ for 1h and cooled rapidly in air. The cement replaced by 10 wt% $C_4A_3S$ expansive additives was investigated by the measurement of the hydration products and compressive strength, setting time, expansion at wet curing condition. $C_4A_3S$ was found in x-ray diffraction pattern over the temperature $1200^{\circ}C$. The setting time or the cement pastes added clinkers fired at different temperature was shorter than ordinary portland cement. The compressive strength was higher than the ordinary portland cement about 20~30%. The mainly hydration products were ettringite, and $Ca(OH)_2$. The expansion due to the formation of ettringite during hydration decreased the drying shrinkage of hardened cement rather than the ordinary portland cement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3761-3767
• /
• 2009

This study was investigated to determine the combustion characteristics, decomposition efficiency, and the flue gas concentrations after combustion in the high temperature reactor($1,250{\sim}1,400^{\circ}C$, 1 atm) for the liquid wastes(waste oil and waste solvent) generated from the industrial complex. The concentration of nitrogen oxide(NOx) is decreased and the synthetic gas is increased when the mass ratio of $O_2$/waste is about 1.53 because the reaction condition was changed to reduction state. And BTEXs(benzene, toluene, ethylbenzene, xylene) are decomposed more than 99.99%. If the highly concentrated liquid waste (waste oil and waste solvent) is treated under the operating conditions suggested by this study, our treatment method for the liquid waste was found to be proper because of the contaminants emission concentration is very low. In addition, the synthetic gas after combustion can be used as an alternative fuel.