• Research in Community and Public Health Nursing
• /
• v.6 no.1
• /
• pp.34-54
• /
• 1995

Occupational health services in Korea have been operated as dual types: one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative. health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area: 154 places (39.4%) managed by designated. health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation due to the characterstics of each variable and analyzed for impacting factors with relation to the using multiple regression analysis using SPSS PC program, especially using t -test method in order to compare each type of health care management. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. The common sickness management is the most accomplished item in health care area of occupational health care services, while the preventive care and control for the workers who have serious health problems are insufficient in workers health care area. 3. An insufficient accomplishment of overall health education has been shown because it is difficult to perform health education due to almost no chance of the direct introduction at workplaces. Therefore a strong support system for making and supplying the media is necessary in order to activate indirect health education by means of media. 4. Because health care managers and the agencies managers where take the workplaces for this study are almost nurses who have been comparatively high work site rounding rate about an environmental management at the workplaces, that non-profession can also do it, the activities about the professional area not enough. Therefore, an appropriate referral system should be established in order to complement professional area. 5. Two factors which have an effect on the coverage rate of occupational health care services are : one is those from the workplaces such as type of services, the number of workers, the number of harzadous factors and safety & health committee, the other from health care organization about whether there is its own manager or not.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.254-263
• /
• 2020

This study developed indexes of farmers' acceptance factors for new farming technologies and evaluated the importance of the developed. For this study, farming technologies were classified according to the criteria established by the Rural Development Administration, and the Delphi technique was applied to evaluate the importance of the indexes. The indexes were composed of two tiers and evaluated by the analytic hierarchy process (AHP). Results showed that the importance of the first tier was finance and profitability with 43.9%, technology affairs 23.6%, labor environments 22.4%, and related industries and service system 10.1%. The importance of the second tier was the ease of technology acceptance 64.9% and technology completion 35.1% for technology affairs in the first tier, labor intensity 53.7%, work hazard 26.7%, working hours 19.6% for labor environment, farm income increment 69.9% and new fund required 30.1% for finance and profitability, and training and service system 66.7% and activation of related industries 33.7% for related industry and service system. This study may contribute to farmers' acceptance of new farming technologies and increase the efficiency and effectiveness of agricultural research and extension activities by the Rural Development Administration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.272-279
• /
• 2018

This study was conducted to compare the muscle strength, muscle power, and H/Q ratio according to energy system contribution in athletes participating in various sports. Subjects of the study were assigned into an Anaerobic Exercise Group (AEG, n=60; Short-Distance, Weight Lifting, Jumping, Throwing, Bowling, Golf) and an Endurance Exercise Group (EEG, n=60; Modern Pentathlon, Field Hockey, Handball, Cycle, Boxing, Rowing) groups. Isokinetic peak torque/body weight% and flexor/extensor ratio at 60, 180 deg/sec of knee extension and flexion were measured using an cybex 770. Data analysis was conducted using an independent t-test and one-way ANOVA. Based on the results of this study, there was higher extension, flexion strength and flexion power in the AEG than the EEG (p<0.05). We also confirmed higher muscle strength and muscle power in short distance and jumping athletes than other athletes participating in other events (p<0.05). However, there was no significant difference within the endurance exercise group. The HS ratio was within a stable range of 50% to 60% in all events. Collectively, the outcomes of this study indicate that routine physiological and performance testing can provide measurable benefits for elite athletes and their coaches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.328-334
• /
• 2020

At the recent practice test of the Remote Controlled Munition system (for practice), nine out of 125 samples were generated. Although 7.2 % misfires occurred, the acceptance test met the defense standards. Minimizing the probability of broken fuses is essential to reducing the number of samples and improving the AQL according to the process quality. In addition, it is necessary to increase military training and ensure user safety. In the case of practical grenades, hit-type detonators are applied. Unlike the normal design, which takes a hit by strikers, a different design of a hit by pressure from a pressure generator was used. This study analyzed the detonator surface through computational fluid dynamics. The results showed that the probability of functional weakness and retraction increased with increasing slope of the detonator surface. To overcome this, design changes were made to improve the fuse crimping process and increase the detonator holder seat. A performance test with the same number of samples from the whole quantity was operated. The probability of broken fuses was 0 %. Therefore, the reliability and performance of the ammunition can be improved and is expected to contribute to the drawing and process design when developing similar ammunition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.693-699
• /
• 2016

The simulators for pump operation developed by domestic or overseas research have been developed for dynamic analysis or operator training purposes. However, previous developed simulators focused on the operators so they are unsuitable for logic designers or commissioning engineers who need to change the operation conditions or logics arbitrarily. In addition, the simulator for two or more condensate pumps' operation, which can be used easily by plant designers or operators, has not been developed. Accordingly, this paper suggests a simulation method that can be used easily for plant designers or operators using MATLAB Simulink. This suggestion helps users who can use MATLAB to implement ANSI/ISA S5.2, which is applied mainly for DCS (Distributed Control System). In addition, to implement the logics specified in the CODE, Sub-Systems were created for the block and evaluated to determine if they can be used in the simulator. In the working level stage using the suggested method, all error possibilities that might occur during the three pumps' rotation operation could be verified with the suggested simulator during the design stage or before operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.488-496
• /
• 2018

This study examined the Gangwon Province's current implementation of its elimination of invasive plants and explored a plan to effectively manage invasive plants. The percentage of the distribution of the plants was 39.6% for riverside areas, 23.3% for roadside areas, 12.4% for roadside & riverside areas, and 4.6% for areas around farm land and river banks. To ensure the systematic management of invasive plants, the current study suggests a) developing an invasive plants monitoring and management system; b) reinvigorating the participation of residents, private organizations, and military posts; c) planting of native replacement plants and the conversion of the locations as attractions, and d) nurturing the project for using invasive plants. For policy directions to be pursued based on the results of the study, the following are suggested: a) improving laws and systems regarding invasive plants, b) developing a cooperative system for managing invasive plants, c) implementing the training of civilian professionals, d) implementing the elimination of invasive plants, e) developing replacement plants for cities and counties, f) fostering industries that tap into invasive plants, and g) using the Han River Water System Management Fund for funding and greater efficiency.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.239-256
• /
• 2011

The purpose of this study is to deduce the effective improvement plans of engineering education system and to provide the base materials by analyzing satisfaction and problems in the perception survey of stakeholders related in engineering education system including Engineering Education Accreditation System. Engineering education system improvement plans from the results of study are as follows. First, government and university should provide more financial support to the college in order to improve education environment such as laboratories and equipment. Second, in order to improve links among engineering education stakeholders, student-professor, student-faculty, and colleges should operate effective mentoring program and consultation plan. Third, according to service quality evaluation, colleges need to give rewards to distinguished faculties for their outstanding work and build up job training about services in order to enhance satisfaction of students and professors, Also, business related to Engineering Education Accreditation System should be simplified and needs to increase the number of workers exclusively responsible for this work. Forth, in order to enhance comprehension of learning outcome and outcome of Engineering Education Accreditation System, it is necessary to improve Engineering education innovation center's status, to establish active systematic promotion system and to operate engineering education evaluation expert committee such as 'Engineering education system evaluation council'. Fifth, because of the stakeholder's shortage of benefits and tiredness accumulation, the issue of effectiveness in engineering education institutions has raised controversy. Thus, engineering education institutions needs to take measure necessary. Moreover, engineering education improvements should be improved by reflecting opinions from professors, faculties and students who are practically planning, operating and participating engineering education programs.

• Journal of the Korean association of regional geographers
• /
• v.11 no.5
• /
• pp.391-404
• /
• 2005

This paper attempts to show the status and network characteristic of regional innovation support agencies(company support agencies and R&D institutes, RISA) which play an important role in the regional system of innovation in Daegu City, using questionnaire data. Most of these agencies were established in 1990s and tend to locate in Buk-Gu and Dalsu-Gu, being major local universities which retain a large number of R&D and industry support agencies. The business areas of the agencies are largely associated with business training and applied research. Their major role is to provide the information that local firms need to acquire. It shows that they have relationships with 1 to 5 agencies, primarily in the form of informal network, for the purpose of sharing information and knowledge about science/technology and market trend. There are not many spin-offs from RISA. But most of spin-offs from RISA are located in Daegu City and maintain cooperative relationships with their parent organization primarily in the form of formal network. The main purpose of cooperative relationships with RISA is to interchange knowledges about technology.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.19-24
• /
• 2009

It is necessary that the industry has to develop various automated control technology for efficient creation of manufacture automation system according to rapid market situation. One of the technologies is the fused complex control based on PLC-based controlled system. According to rapid growth and distribution of various automated control technologies using PLC, the engineers in automation, Production and manufacturing technologies fields have difficulties in systematic studying on the technologies by choosing an optimal route due to various industry-applied examples and ranges, in spite that the technology is essential. Therefore, the researchers indicate applied outputs and effects extracted by systematically developing systematic company-specified training program by analyzing education procedure drawbacks for S-company engineers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.543-550
• /
• 2014

In many industrial processes and operations, such as power plants, petrochemical industries and ships, shell and tube heat exchangers are widely used and probably applicable for a wide range of operating temperatures. The main purpose of a heat exchanger is to transfer heat between two or more medium with temperature differences. Heat exchangers are highly nonlinear, time-varying and show time lag behavior during operation. The temperature control of such processes has been challenging for control engineers and a variety of forms of PID controllers have been proposed to guarantee better performance. In this paper, a scheme to control the outlet temperature of a shell and tube heat exchanger system that combines the PID controller with feedforward control and anti-windup techniques is presented. A genetic algorithm is used to tune the parameters of the PID controller with anti-windup and the feedforward controller by minimizing the IAE (Integral of Absolute Error). Simulation works are performed to study the performance of the proposed method when applied to the process.