• Journal of the Daesoon Academy of Sciences
• /
• v.31
• /
• pp.131-163
• /
• 2018

The concept of pilgrimage is a phenomenon that appears in almost every major religion. It is traditionally defined as religious travel to a sacred external place for spiritual purposes and introspection. However, there are many different relationships between pilgrimages and religious customs, including excursions through abstract dimensions and regular journeys such as annual holidays. Because modern pilgrimages are taken for a variety of reasons, they are not limited to faith-based historical locations. Thus, many scholars also perceive pilgrimages as an increasing part of the general industry of tourism. These journeys are now studied in a diverse range of fields (e.g., ethnography and tourism). In this way, pilgrimages have created a new market from an industrial perspective. This economic analysis has resulted in secular interest. Pilgrimages can now be taken by gil (walkways), which have gained tremendous popularity. Thus, religiosity and humanity as they are embraced through pilgrimages are now receiving outside influences. This study therefore is aimed at generating suggestions for developing the pilgrimage routes related to Kang Jeungsan (i.e., the Supreme God of Daesoon Jinrihoe). These proposed Jeungsan routes are not simply restricted to religious activities or nostalgia, nor are they exclusively concerned with encountering holiness. To realize this idea, it is necessary to reconsider the concept of a sacred space.

• Clean Technology
• /
• v.16 no.3
• /
• pp.213-219
• /
• 2010

Vortex tube is the device that can separate small particles from the compressed gas, as well as compressed gas into hot and cold gas. Due to energy and particle separation ability, a vortex tube can be used as the main component of the $CO_2$ absorption device. In this study, experimental approach has been performed to analyze the energy separation characteristics of the vortex tube. To obtain the preliminary design data, energy separation characteristics of the vortex tube has been tested for orifice diameter, nozzle area ratio, and tube length. As a result, the orifice diameter is the major factor of the vortex tube design. The nozzle area ratio and tube length have a minor effect on the energy separation performance. For Dc=0.6D, AR=0.14~0.16, and L=16D, maximum energy separation has been occurred. The result from this study can be used as the basic design data of the $100Nm^3$/hr class vortex tube applied to the $CO_2$ absorption device. Compared with the $CO_2$ absorption process containing an absorption tower, the process with a vortex tube is expected to have a huge advantage of saving the installation space and the operating cost.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.697-702
• /
• 2023

Recently, with the introduction of drones, a core technology of the 4th industrial revolution, various convergence education using drones is being conducted in school education sites. In particular, drone theory and practice education is being conducted in connection with free semester classes and career exploration. The drone convergence education program has higher learner satisfaction than simple demonstration and practice education, and the learning effect is high due to direct practical experience. However, since practical education is being conducted for a large number of learners, it is impossible to restrict and control the flight of a large number of drones in a limited place. In this paper, we propose a monitoring system that allows the instructor to monitor multiple drones in real time and learners to recognize collisions between drones in advance when multiple drones are operated, focusing on education operated in schools. The communication module used in the experiment was equipped with GPS in Murata LoRa, and the server and client were configured to enable monitoring based on the location data received in real time. The performance of the proposed system was evaluated in an open space, and it was confirmed that the communication signal was good up to a distance of about 120m. In other words, it was confirmed that 25 educational drones can be controlled within a range of 240m and the instructor can monitor them.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.37-48
• /
• 2010

In this study, the seepage flow monitoring method by the hydraulic head loss rate was developed for the purpose of application to offshore construction site enclosed by cofferdams in which seepage force varies periodically. The amount of the hydraulic head loss rate newly defined in this graph was in a range between 0 and 1. The zero of the rate means the existence of flow with no seepage resistance. The 1 of the rate means no seepage flow through the ground. The closer to 1 the coefficient of determinant in the hydraulic head loss graph is, the more the ground through which seepage water flows is stable. The closer to 0 the coefficient of determinant in the hydraulic head loss graph is, the more the ground through which seepage water flows was unstable and the higher the possibilities of existence of empty space or of occurrence of piping on the seepage flow pass in the ground is. The hydraulic head loss graph makes it possible to monitor sensitively the situation of seepage flow state, and the graph helps to understand easily the seepage flow state at the specific section on the whole cofferdam.

• Industry Promotion Research
• /
• v.8 no.2
• /
• pp.119-132
• /
• 2023

The purpose of this paper is to re-establish the concept of Eastern time, which is used in Myeongliology and Kimun-dungap, and to discuss the use of real-time of the sun according to the birth area, the selection of real-jasi between night-jasi and real-jasi, and the exact meaning of birth time. The conventional use of time in Korean society uses Tokyo as standard time and uses a time system in which a new day begins at midnight. Howev er, what is important is not social univ ersality but the time and space of the univ erse where I was born, which is the center of the universe, should be the standard of my fate, so I have to use the longitude of the place where I was born to determine my exact time. Also it is argued that real-jasi should be selected for the selection problem of night-jasi and real-jasi, which has long been a controversial topic in Myeongliology, because the flow of cosmic energy is signaled an hour ahead. To secure the validity of setting such time, a case analysis was conducted using the time adjustment method through the spread of Kimun-dungap. Through in-depth interviews with the analysis subjects, the lives of the past were collected by date and time, and then Kimun-dungap checked whether the timing of each life event was accurate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1577-1585
• /
• 2022

As the interest in the 4th industrial revolution and metaverse increases, metaverse with multi edge structure is proposed and noted. Metaverse is a structure that can create digital doctor-like system through a large amount of image processing and data transmission in a multi edge system. Since metaverse application requires calculating performance, which can reconstruct 3-D space, edge hardware's insufficient calculating performance has been a problem. To provide streamable AI software in runtime, image processing, and data transmission, which is edge's loads, needs to be lightweight. Also lightweight at the edge leads to power consumption reduction of the entire metaverse application system. In this paper, we propose collaborative edge-cloud image processing with remote image processing method and Region of Interest (ROI) to overcome edge's power performance and build streamable and runtime executable AI software. The proposed structure was implemented using a PC and an embedded board, and the reduction of time, power, and network communications were verified.

• Convergence Security Journal
• /
• v.22 no.5
• /
• pp.21-35
• /
• 2022

The use of digital information according to the development of information and communication technology and the 4th industrial revolution is continuously increasing and diversifying, and in proportion to this, crimes using digital information are also increasing. However, there are few cases of establishing an environment for processing and analysis of digital evidence in Korea. The budget allocated for each organization is different and the digital forensics laboratory built without solving the chronic problem of securing space has a problem in that there is no standard that can be referenced from the initial configuration stage. Based on this awareness of the problem, this thesis conducted an exploratory study focusing on tools and equipment necessary for building a digital forensics laboratory. As a research method, focus group interviews were conducted with 15 experts with extensive practical experience in the digital forensic laboratory or digital forensics field and experts' opinions were collected on the following 9 areas: network configuration, analyst computer, personal tools·equipment, imaging devices, dedicated software, open source software, common tools/equipment, accessories, and other considerations. As a result, a list of tools and equipment for digital forensic laboratories was derived.

• Convergence Security Journal
• /
• v.22 no.4
• /
• pp.35-44
• /
• 2022

Among the five promotion strategies of Defense Innovation 4.0(DI 4.0), the military structure/operation optimization strategy aims to innovate the military structure based on advanced science&technology(S&T), and to integrate advanced S&T in the field of defense operation such as education&training and human resource development. As the future battlefield expands to AI-based unmanned/robot combat systems, space, cyberspace, and electromagnetic fields, it is necessary to train officers with the capabilities required in these battlefields. It is necessary to develop capabilities from junior officers who will lead the future battlefield to operating core advanced power based on the 4^th industrial revolution S&T. We review the education system of the military in universities and propose a method of redesigning the education system that is compatible with DI 4.0 and can develop technology-intensive capabilities based on advanced S&T. We propose a operation plan of major and extra-programs that can develop the capabilities of junior officers required for the future battlefield, and also suggest ways to support the army's practical training.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.209-221
• /
• 2023

In the external inspection and packaging stages of products used in the semiconductor manufacturing process, there is a problem in which particles are adsorbed to the product itself or a carrying tool due to electrostatic discharge. This study presents a methodology that can improve the problem of adsorption of particles to a product by using a practical TRIZ technique. By applying the proposed practical TRIZ-based methodology, the problem was defined, and contradictions caused by product waiting time were derived. Among the derived contradictions, physical contradictions were set and the concept of 'space separation' was applied to derive solutions such as 'installation of Ionizer' and 'improvement of the layout of the workroom'. As a result of the experiment by applying 'Ionizer Installation' and 'Workroom Layout Improvement' derived through the application of practical TRIZ, it was confirmed that the particle adsorption problem that occurs during the waiting time of the product can be solved.Through this study, it is expected that workers, facility engineers, and technical engineers working at manufacturing processes will be able to effectively solve the problems they face through creative thinking and change of ideas by using practical TRIZ techniques, and contribute to innovative technology development and productivity improvement.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.107-122
• /
• 2023

The demand for spatial information in the era of the 4th Industrial Revolution is expanding Additionally, interest in attribute data related to geography or location is increasing. In the field of spatial information, spatial information policies and services tailored to the public can be provided through linkage and integration with new attribute data, and these data are resources for this purpose. In order to meet this expanding and diverse demand for spatial information utilization, it is necessary to develop technologies for linking and utilizing various attribute information such as public data. In this study, we aim to present a technology development strategy for linking and integrating attribute data and spatial information through a review of theories related to data linkage and integration, the current status of data on public data portals, and existing prior research. As a result, it was suggested that the data identifier of the attribute data to be linked should be used to develop linkage technology between spatial information and attribute data, and an attribute data linkage process that can be used when designing a prototype for technology development was presented.