• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.130-136
• /
• 2010

In this study, we propose a new method for generating candidate solutions based on both the Cauchy and the Gaussian probability distributions in order to use the merit of the solutions generated by these distributions. The Cauchy probability distribution has larger probability in the tail region than the Gaussian distribution. Thus, the Cauchy distribution can yield higher probabilities of generating candidate solutions of large-varied variables, which in turn has an advantage of searching wider area of variable space. On the contrary, the Gaussian distribution can yield higher probabilities of generating candidate solutions of small-varied variables, which in turn has an advantage of searching deeply smaller area of variable space. In order to compare and analyze the performance of the proposed method against the conventional method, we carried out experiments using benchmarking problems of real valued functions. From the result of the experiment, we found that the proposed method based on the Cauchy and the Gaussian distributions outperformed the conventional one for most of benchmarking problems, and verified its superiority by the statistical hypothesis test.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.1
• /
• pp.128-134
• /
• 2014

With the development of Information Communication Technology and a way of solving problems such as productivity improvement, advanced working attitude, greenhouse gas reduction, low birth rate, aged problem, etc., the need of smart work is increasing. Getting out of legacy working types that are limited in time and space, the flexible seat system at a smart work center that supports the smart working environment is proposed. However, the seat choice based on employee's emotional judgement may cause the decline of forming cooperative space and mutual communication because of the scattered seat arrangement between employees. This paper proposed a seat recommendation method for the mutual cooperation at a smart work center. The method is based on a work similarity of employees. A prototype system also implemented to show the feasibility.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.2
• /
• pp.116-123
• /
• 2024

In the manufacturing industry, dispatching systems play a crucial role in enhancing production efficiency and optimizing production volume. However, in dynamic production environments, conventional static dispatching methods struggle to adapt to various environmental conditions and constraints, leading to problems such as reduced production volume, delays, and resource wastage. Therefore, there is a need for dynamic dispatching methods that can quickly adapt to changes in the environment. In this study, we aim to develop an agent-based model that considers dynamic situations through interaction between agents. Additionally, we intend to utilize the Q-learning algorithm, which possesses the characteristics of temporal difference (TD) learning, to automatically update and adapt to dynamic situations. This means that Q-learning can effectively consider dynamic environments by sensitively responding to changes in the state space and selecting optimal dispatching rules accordingly. The state space includes information such as inventory and work-in-process levels, order fulfilment status, and machine status, which are used to select the optimal dispatching rules. Furthermore, we aim to minimize total tardiness and the number of setup changes using reinforcement learning. Finally, we will develop a dynamic dispatching system using Q-learning and compare its performance with conventional static dispatching methods.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.39-46
• /
• 2006

We propose an global color model based method for tracking motions of multiple human using a networked multiple-camera system in intelligent space as a human-robot coexistent system. An intelligent space is a space where many intelligent devices, such as computers and sensors(color CCD cameras for example), are distributed. Human beings can be a part of intelligent space as well. One of the main goals of intelligent space is to assist humans and to do different services for them. In order to be capable of doing that, intelligent space must be able to do different human related tasks. One of them is to identify and track multiple objects seamlessly. In the environment where many camera modules are distributed on network, it is important to identify object in order to track it, because different cameras may be needed as object moves throughout the space and intelligent space should determine the appropriate one. This paper describes appearance based unknown object tracking with the distributed vision system in intelligent space. First, we discuss how object color information is obtained and how the color appearance based model is constructed from this data. Then, we discuss the global color model based on the local color information. The process of learning within global model and the experimental results are also presented.

• 월간산업보건
• /
• s.87
• /
• pp.53-54
• /
• 1995

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.53.1-53.1
• /
• 2017

Gravitational wave (GW) is a probe to observe compact objects (WD, NS, and BHs) in the Universe. Compact binary coalescences (CBCs) were expected to be primary sources of LIGO, VIRGO, and KAGRA. Indeed GW150914 from BH-BH binary coalescence at 430 Mpc was discovered by LIGO between 25-350 Hz. The total system mass of GW150914 is ${\sim}70M_{\odot}$, and about $3M_{\odot}$ of energy is converted to GWs in 0.2s of the observation duration. In lower frequencies below 10 Hz, in addition to CBCs with $1-100M_{\odot}$, more massive sources of ${\sim}1,000-10,000M_{\odot}$ are observable for seconds up to days in time scale. We introduce GW astrophysics and present highlights of target sources for the proposed super conducting low-frequency gravitational-wave telescope (SLGT).

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.437-444
• /
• 2012

The purpose of this study was to suggest appropriate human model for ergonomic evaluation considering working postures on 3D space. Background: Traditionally extreme design rules have been widely utilized at the stage of designing products. Body size of 5th percentile and 95th percentile in stature has been generally selected for controllability and clearance evaluation, respectively. However, these rules had limitations in reflecting working posture in ergonomic evaluation. Method: In order to define working posture on 3D space, not only sagittal plane but also lateral plane was considered. Kinematic linkage body model was utilized for representation of working posture. By utilizing the anthropometric data of 2,836 South Korean male populations, the point cloud for end points of linkage models was derived. The individuals who were lacking in certain controllability were selected as human models for the evaluation. Result: In case of standing posture it was found that conventional approach is proper for all controllability evaluations. Contrary to standing posture, tall people had less controllability on control location below shoulder point in sitting posture. Conclusion: From the derived proper range on controllability, ergonomic evaluation rule was suggested according to working posture especially in standing and sitting. Application: The results of the study are expected to aid in selection of appropriate human model for ergonomic evaluation and to improve the usability of products and work space.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.490-499
• /
• 2017

In recent years, the introduction of complex systems analysis based on various variables has become more active in order to identify and analyze complex problems of Modern Society. Prediction of patients' spatial perception and usability according to the spatial arrangement of the outpatient department is a very important factor for providing high quality hospital service. For objective analysis, the standard program procedure and analysis index for the diseases of the elderly were prepared and the uniformity of the atmospheric space was evaluated through heat map analysis and quantitative analysis. In this study, 73 cells were installed and simulated to analyze the uniformity of the four alternatives according to the change of the arrangement of the medical care space, receiving space, and consultation space using the complex system analysis method for the nursing hospitals. The resulting density was derived. The results are as follows. 1)The layout of the reception space has the greatest influence on the total spatial density of the waiting space. 2) The uniformity of the waiting space can be increased by separating the examination space and the examination space. 3)The closer the location of the receiving space is from the entrance, the greater the density of the waiting space. Finally, this study applied discrete event simulation to the evaluation of uniformity of atmosphere space, and proved that the actor - based model can be utilized for utilization and evaluation as spatial analysis methodology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.501-513
• /
• 2017

This study analyzed the situation of urban agriculture development through theories, paradigms, and typology to determine the application frequency and development keywords about space forming. The results showed that urban space by distance determines "Dimension of space forming" through self-production, public-production, and nation-social operation. Second, the complex space by shape determine "Identity of space forming" through "Flat Shape" for using the widespread land, "Compact Shape" for overcoming the small and poor land, and "Fusion of Flat Compact Shape" for systematic use between Flat and Compact. Third, building and interior space according to location determine the "Utility of space forming" through land, roof, wall, veranda, interior, and infrastructure space. The concepts about space forming of urban agriculture have an organic correlation and will be developed sustainably by the evolved cases from now on. In addition, space forming of urban agriculture produces new creation space by various fusion processes and will be a development trend of new urban agriculture.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.160-197
• /
• 1996

The purpose of this study is to review research trends and issues of economic geography in Korea for the last fifty years by sub-fields of agricultural geography, industrial geography, commercial and service geography, and transportation geography. Research in Korean economic geography has progressed significantly in terms of the scope and the number of papers published during the last a half a century. Agricultural geography was a leading field of economic geography in Korea before mid-1970s. Since the mid-1970s, however, agricultural geography has turned over the leading role in economic geography to industrial geography. Classification and structure of agricultural region has been the most popular research theme in Korea, even though diverse topics has been dealt in the research of agricultulal geography in Korea during the last fifty years. In recent years, emphasis is given to study on the dynamics of agricultural region and regional differentiation of part-time farming. It is suggested that the future issues of research in agricultural geography in Korea are agricultural restructuring and changes in agricultural space under the WTO system, changes in rural area and agricultural region with the progress of informatization, changes in agricultural structures and rural society by the increase of part-time farming, governments agricultulal policy and its impacts, competitive advantages of Korean agricultulal products, and environmental impacts of agricultural restructuring. Research in industrial geography has remarkably progressed since the 1980s. Locational changes, regional industrial structure and formation of industrial region were the major topics of interest in the research of industrial geography in Korea before 1980. Since the early 1980s, in addition to the topics which were interested in before 1980, changes of industrial organization and industrial location, changes of production systems and industrial space development of high technology industries and science parks, industrial restructuring and regional economy, foreign direct investments, industrial linkages and industrial districts, and industrial policy and regional development have been the major research themes of industrial geography in Korea. Considerable number of papers has been published both in Korean journals and in foreign journals during this period. Considering global changes in the organization of industrial space, future research should be more focused on firms strategy for regaining competitive advantages, local and global perspectives of industry, industry and environmental changes, in addition to the topics which have been dealt in recent years. Research in commercial and service geography and transportation geography was negligible in Korea before the late 1970s. These two sub-fields in economic geography have begun to develop since 1980s. Periodic markets, structure of commercial area, and distribution of products were the major topics of interest in the 1980s in the commercial and service geography in Korea. In the 1990s, however reserch in producer services has been active with growth of producer services in Korean economy. It is suggested that regional changes with progress of informatization and technology, changes of international trade and regional changes, development of efficient distribution system, role of producer services in regional development, and network of producer services are the major issues to be studied in the future in the field of commercial and service geography in Korea. Commuting, distribution of products, and transportation networks have been the major topics of research in transportation geography in Korea. Diverse quantitative techniques have been applied in the most of the researches in transportation geography. It is required that future studies in transportation geography should also focus on societal and behavioral issues, policy issues regional impacts of new transportation facilities, an analysis of transportation system at the global or international level. Since the 1980s economic geography in Korea has considerably progressed with publication of papers and books. The progress can be regarded as successful in quantitative aspect, but not in quantitative aspects. For the development of Korean economic geography in both quantitative and qualitative aspects, it is necessary to promote international collaborative researches and interdisciplinary cooperations. Attention should also be given to the research on changes in competitive advantages and economic restructuring, changes of economic space with the development of high technology and the progress of informatization. economic development and culture. and foreign regional studies.