• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.277-306
• /
• 2017

Most past studies on the Critical Success Factors of Company Informatization focused on the completeness of Informatization and its financial effect, and there have not been enough studies on whether a company's management strategies can be supported by establishing Informatization direction. This implies that there must be verification on the followings; whether Informatization focuses on steering the implementation of management strategies, what correlation there are between major mechanism factors and Informatization performance. This also implies that there must be a new study to re-interpret the existing success factors of Informatization into strategic management paradigm. The purpose of this study is to empirically verify the influence of subject, environment, resource, and mechanism factors on informatization achievement, and to analyze the differences in influence of informatization success factors on informatization achievement depending on domestic large corporations and SMEs. This study presented the verification results for seven research hypotheses. It was confirmed through empirical analysis that securing resource factor was significant in informatization performance and that all sub-factors of learning mechanism and coordination mechanism were also significant in enterprise informatization achievement. In addition, it was confirmed through the control effect analysis depending on enterprise size that the differences in informatization performance of large corporations and SMEs are due to support environment factor, learning mechanism, and selection mechanism. The implications of this study are as follows: First, the significance of mechanism factors such as learning, internal coordination, and external coordination are relatively higher than other factors in informatization achievement. Secondly, informatization success factors that SMEs must focus on achieving are presented by analyzing the differences on informatization achievement of large corporations and SMEs. Third, since empirical research for informatization success mechanism factors not covered empirically in the prior research was directly progressed, it is thought that it could provide a comprehensive understanding for mechanism factors. In addition, this study is thought to provide a practical contribution that can be applied to other industrial areas and enterprises.

• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.93-114
• /
• 2020

Platform is considered as an alternative strategy to the traditional linear pipeline based business. Moreover, in the 4th industrial revolution period, efficiency driven pipeline business model needs to be changed to platform business. We have such success stories about platform as Apple, Google, Amazon, Uber, and so on. However, for those smaller corporations, it is not easy to find out the transformation strategy. The essence of platform business is to leverage network effect in management. Thus platform based management can be rephrased as network management across the business functions. Research on platform business is popular and related to diverse facets. But few scholars cover what the research trend of the domain is. The main purpose of this paper is to identify the research trend on platform business in Korea. To do that we first propose the analytical model for platform architecture whose components are consumers, suppliers, artifacts, and IT platform system. We conjecture that mapping of the research work on platform to the components of the model will make us understand the hidden domain of platform research. We propose three hypotheses regarding the characteristics of research and one proposition for the transitional path from pipeline to platform business model. The mapping is based on the research articles filtered from the Korea Citation Index, using keyword search. Research papers are searched through the keywords provided by authors using the word of "platform". The filtered articles are summarized in terms of the attributes such as major component of platform considered, platform type, main purpose of the research, and research method. Using the filtered data, we test the hypotheses in exploratory ways. The contribution of our research is as follows: First, based on the findings, scholars can find the areas of research on the domain: areas where research has been matured and territory where future research is actively sought. Second, the proposition provided can give business practitioners the guideline for changing their strategy from pipeline to platform oriented. This research needs to be considered as exploratory not inferential since subjective judgments are involved in data collection, classification, and interpretation of research articles.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.387-393
• /
• 2012

In order to improve storability of subtropical yam produced in South Korea, the major pathogens found during the storage were isolated and identified of the pathogenicity, and rot inhibition effect was studied based on the curing treatment condition. Penicillium sclerotigenum and Penicillium polonicum were identified as major pathogens causing rot in subtropical yam during storage, and P. sclerotigenum had stronger pathogenicity. Only the cut surface which has been made during a harvest and has been made smooth before curing generated a normal callus layer. The cut surface of tuberous root was cured in 95% of relativity humidity for three days at $23^{\circ}C$, and cured at $28^{\circ}C$ and $33^{\circ}C$. The observation of callus layer showed that the $23^{\circ}C$ treatment group had similar color saturation between tuberous root and pellicle, while the groups treated above $28^{\circ}C$ showed clear distinction. The generation rate of callus 0.5mm or bigger was 93 percent at $28^{\circ}C$ treatment, 96% at $33^{\circ}C$ treatment, but was 52% at $23^{\circ}C$ treatment. The conventional curing treatment group that used wind or sunlight at room temperature created little callus layer. The infection rate of pathogens according to the relative humidity inside the storage room was low at 40% and 60% of humidity, and the curing treatment period did not make a difference. When the humidity inside the storage room was 80%, all treatment groups rapidly increased the fungal pathogens. The rotten rate of each treatment was studied after 180 days during which the storage temperature was maintained at $16^{\circ}C$ and relative humidity 60%. While the rotten rate of tuberous root that has been cut in conventional curing treatment based on solar and wind was 43%, the one cured at over $28^{\circ}C$ and created the callus layer was less than 18%. While even a healthy tuberous root showed 25% of rotten rate in the traditional treatment group, the one cured at over $28^{\circ}C$ was less than 10%. The weight loss was 1-6% lower in the forced treatment group than in the conventional treatment group.

• Journal of Life Science
• /
• v.26 no.6
• /
• pp.689-697
• /
• 2016

Kefir is an acidic-alcoholic fermented milk product originating from the Caucasian mountains. Kefir has long been known for its probiotic health benefits, including its immunomodulatory effects. The objectives of this study were to investigate the properties of a fermented whey product and to examine the effects of kefir grains on the in vitro immune-modulation of human mast cell-1 (HMC-1). The results showed that the whey fermented by kefir grains contained the maximum lactic acid bacteria and yeast for 16 hr by 1.83×10⁸ and 6.5×10⁵ CFU/ml, respectively, and lactose and whey proteins were partially hydrolyzed. The experimental whey fermented by kefir grains exhibited an in vitro anti-inflammatory effect on the HMC-1 line for 8, 16, and 24 hr, and this effect induced the expression of interleukin (IL)-4 as a pro-inflammatory cytokine, but not for 48 hr by RT-PCR in HMC-1 cells. In addition, the same phenomenon was observed for the expression of IL-8 as a pro-inflammatory cytokine by the kefir-fermented whey during the same periods of 8-48 hr under the same conditions. These cytokines resulted in the production of IL-4 at 20-25 ng in HMC-1 cells for 8, 16, and 24 hr, whereas 5 ng was produced for 48 hr by the fermented whey. In contrast, IL-8 was produced at 15-20 ng in HMC-1 cells during 4, 8, 16, and 24 hr, while 7 ng was produced at 48 hr. It was concluded that the whey fermented by kefir grains possesses a potential anti-inflammatory function, which could be used for an industrial application as an ingredient of functional foods and pharmaceutical products.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.142-163
• /
• 2019

The purpose of this study is to analyze the effect of problem solving ability and satisfaction of university students who are pre-technology teachers in woodworking products(birdhouse) making program using design thinking. Survey responses are analyzed by statistical programs(SPSS ver.20) such as satisfaction, confidence in problem solving, difficulties and causes of difficulties according to gender and grade of 33 students who conducted experience programs in extra-curricular programs to improve creativity and problem solving ability. The main conclusions of this study are as follows: First, the average of total satisfaction about experience programs is 4.39, which is somewhat high. The highest average response is 'feelings of accomplishment' and 'advice in the surroundings'(M = 4.46). There is no significant difference between male and female, and grade. The students interest in group-based different birdhouse woodworking together with the help of the surrounding people by the process of design thinking rather than practice to follow. Therefore, I'd like to recommend to other students due to this program shows a high self-confidence, sense of accomplishment, and satisfaction. Second, the total average response of students 'self-confidence for problem solving at the group based making experience program using design thinking is 3.80. In result of group activities, the students have self-confidence of 'problem-solving ability and deal with difficult situations'. Later, in making programs, complementing difficulties of making can enhance the satisfaction of the students. Third, in the survey questionnaire related with problem solving ability confidence, between 'I have the ability to solve many problems' and 'I always have the ability to cope with new and difficult business situations' show the highest correlation. Therefore, in order to improve self-confidence of problem solving ability, it is necessary to prepare teaching learning programs that can strengthen problem solving ability. Fourth, in the new design and making process not a given product design, the most difficult step is 'the process of rework and modifying idea product'. The main reason that students have difficulty in the production process is 'lack of knowledge and ability to produce'. To make various woodworking products using design thinking process, it can be helpful to make works if you have enough training on woodworking and design thinking before product making. The students' satisfaction about team-based learning using design thinking that helps improving creativity and problem solving ability is high. Therefore, the result of the research in other making activity program that design thinking is applied and analyzed can improve students' problem solving ability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.153-159
• /
• 1997

Pokeweed, a polycarpic plant, has been used as herbage medicine, vegetable or dye. It, however, is known as an aggressive plant in the vicinity of the industrial area evolving air pollutants. The experiment was done to determine the effect of priming using nitrates, germination temperature and light quality on germination of its seed to get information on the optimum germination process as well as its establishment. The daily percent germination was measured to 12 days after sowing since its seeds were treated by two different nitrates [KNO$_3$, Ca(NO$_3$)$_2$]. their different concentrations (0, 50, 150, 300mM), then treatment duration (1, 3, 6 days), different germination temperature (day /night; 30/30, 30/20, 20/30, 20/2$0^{\circ}C$) and light quality (red, white, dark) before or during germination. The percent germination was greater in the KNO$_3$ treatment than in the Ca(NO$_3$)$_2$ but in the priming treatment with KNO$_3$ in comparison with no-priming. In the priming treatment with KNO$_3$, the percent germination was increased with its increased concentration to 150mM although decreased with delayed duration to 6 days. Regardless of light quality, the greater percent germination was shown in the order of 2$0^{\circ}C$ constant and 20/3$0^{\circ}C$ alternative, 3$0^{\circ}C$ constant, 30/2$0^{\circ}C$ alternative temperature. The germination was less in the dark during germination than in the illumination in which the red light had greater percent germination compared to white light. The seeds primed with KNO$_3$ were germinated under the alternative temperature even in the dark condition.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.1
• /
• pp.19-42
• /
• 2008

Blood-Letting Therapy is a rational and ecological medical treatment by which we can heal most of the diseases by removing the static blood which precipitates in the blood vessel and blocks the flowing of blood. And the static blood is the generic term for the injurious, bad, dead and precipitated blood which is blocked the capillary vessel. The Yellow Emperor's Canon of Internal Medicine says that "the patient is treated with drugs internally and stone acupuncture externally. "In the old texts, the blood-letting therapy is mentioned as blood-letting, network vessel pricking, bloodletting, pricking, and arousing pulses etc and it is noted down as the method of network vessel pricking in 'On the Application of Needles' of Spiritual Pivot. Nine-pricking therapy, twelve-pricking therapy and five-pricking therapy are recorded in the methods of network vessel pricking and among them, the method of squeezing blood after pricking the affected part is explained as the network vessel pricking. There are four methods of network vessel pricking, pricking, picking, cluster needling and scatter-pricking and they are fluidly applied to the various symptoms of diseases. In 'On Discriminative Treating for Patients of Different Regions' in Elementary Questions, Ki-baek emphasizes "most of the local people, there are black in skin and loose in striate, and their diseases are mostly of carbuncle kind. It is suitable to treat the disease with stone therapy to prick with stone, so the stone therapy is transmitted from the east. "And in 'On the Corresponding Relation Between the Eum and Yang of Man and All Things' in Elementary Questions, when the Emperor asked Ki-Back, he answered "sthenia means the sthenia of evil, and deficiency means the deficiency of healthy energy. When the blood is sthenic, the evil should be discharged by pricking when out letting the blood; deficiency of vital energy is the asthenia of channels and network vessels, so the energy should drain from the channel which is not deficient, to replenish. "And in this case we can use the methods of 'Breaking out the static bloods', 'driving out the static bloods', blood-letting'. With this we can infer that the blood-letting therapy is made use of the important medical treatments from the ancient times. Especially in referring to the principles of treatment in The Yellow Emperor's Canon of Internal Medicine, it mostly alluded to acupuncture therapies and only eleven times to medicinal treatments. This is to verify that the blood-letting therapy formed the foundation of the medical art. In Dong's Therapy of Acupuncture-Moxibustion and Bloodletting, Dong Kyeong-Chang gave emphasis on the points that there must be extravasated bloods without exception in the serious illnesses which is old, unnatural, accompanying acute pains and so we can revive our body‘s sprit by circulating 'gi' and static blood piled up in the network vessel, regulating the weakness and strength, and controling the disharmony of the internal organs. The blood-letting therapy has effect on the orifice in emergency, such as fore draining, freeing network vessels, harmonizing gi and blood, relieving pain, dispersing swelling and concretion, sedation, resolving toxin as well as strengthening the heart, relieving itching. So it has distinguished effect on all kinds of medical treatment to the modern people. But by the change of social customs and the confucianism of confucius - it is widely spread on the period of North and South Dynasties, 'Wi' and 'Jin' in china and the period of the Three States in korea - The blood-letting therapy which was regarded as the most important medicinal treatment withered rapidly. And Confucius accentuated the importance of our body and all its members, loyalty and filial piety and banned any damage of our body under no circumstances. As a result of it, the therapy of blood-letting had a rapid decrease and barely kept itself in existence in both countries. What is worse, at the period of Japanese colonial rule of korea and our nation's founding of early stage, it has been withered by the high-handed policy to change Oriental Medicine into modern medical science. So the therapy of blood-letting barely kept itself in existence in some Buddhist temples. Another case, it has handed down as a old-fashioned quick fix in folk remedies. But all kinds of the contamination of heavy metals and the misuses of antibiotics are widely spread nowadays, which increased diseases of adult people and incurable diseases as modern society unavoidably made its way into a highly industrial society. To make us more miserable, the western medical science - the antibiotics and surgical operation medical science - already reveals itself into a limit. The necessity of a new medical science which can give a security to the patients who are suffering from the diseases of adult people and the incurable diseases is especially come into the force nowadays. In view of the results after bibliographically studying on the blood-letting Therapy in Elementary Questions of the Yellow Emperor's Canon of Internal Medicine, the blood-letting therapy has acted for the important Oriental medicinal science and has been clarified the prominent effects on the diseases of adult people and the incurable diseases. So it is regarded as an appropriate thing that we lay out a determined theory of the blood-letting therapy and of course prevent the unwanted side effects from inappropriate medicinal treatments, and make full use of clinic by elevating the curative value and that we win back our self-respect of medical treatment which is dominated from the western medical science and ultimately contribute to national medical welfare.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.41-46
• /
• 2011

In this study, in addition to the green tea-wood fiber hybrid composite boards of previous researches, to make effective use of saw dust of domestic cypress tree with functionalities and application as interior materials, eco-friendly hybrid composite boards were manufactured from wood fiber, green tea and saw dust of cypress tree. We investigated the effect of the component ratio of saw dust and green tea on static bending strength performances. Static bending MOE (modulus of elasticity) was within 0.956~1.18GPa, and showed the highest value in wood fiber : green tea : saw dust = 50 : 40 : 10 of the component ratio, and had the lowest value in 50 : 30 : 20 of component ratio. These values were 2.0~3.1times lower than those of green tea-wood fiber hybrid composite boards reported in the previous researches. The bending MOR (modulus of rupture) showed 8.99~11.5MPa, the change of the bending MOR with component ratio of the factors was the same as that of bending MOE. These values had 1.9~3.5 times lower value than those of green tea-wood fiber hybrid composite boards, and showed the slightly lower values than the MOR of particle boards (PB) and medium density fiberboards (MDF) prescribed in Korean Industrial Standard. Therefore, it is considered that these hybrid composite boards need to improve strength performances by component ratio change, hybrid composite with other materials and adhesive change etc. in order to industrialize the hybrid composite boards.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.569-579
• /
• 2019

In this study, the effect anti-oxidant, anti-inflammatory, and liver protective activity was investigated via quick ultrasonic disintegration of pine pollen using a probe sonicator (PS) followed by the extraction with water, 70% ethanol, and 100% ethanol. The anti-inflammatory effect was studied by measuring the production of nitric oxide (NO) and cytokine in RAW264.7 cells induced with lipopolysaccharides (LPS). The cell toxicity was also checked with an 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and the experiment was conducted using non-toxic $100{\mu}g/mL$. The NO inhibition rate was highest in the 70% ethanol PS group at $85.99{\pm}0.12%$. Also an excellent efficiency was obtained from the results of interlukin-1 beta ($IL-1{\beta}$) and tumor necrosis factor alpha ($TNF-{\alpha}$), which is related to inflammation-related cytokine, with the respective inhibition rates of 63 and 22%. To examine liver protective activity, HepG2 cells were treated with Taclin, and the generation of glutamic oxaloacetic transaminase (GOT) and lactate dehydrogenase (LDH) was measured in the culture solution. From GOT and LDH generation results, the inhibition rates in the 70% ethanol PS group were 28% and 13%, respectively, which was higher compared to that of using negative control group. Our results suggest that pine pollen extracted in 70% ethanol using PS may be used to develop food products that have anti-aging, anti-inflammatory, and liver protective effects.