• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.24-35
• /
• 2021

Due to increasing awareness on the treatment of end-of-use/life products, disassembly has been a fast-growing research area of interest for many researchers over recent decades. This paper introduces a novel lot-sizing problem that has not been studied in the literature, which is the service-parts lot-sizing with disassembly option. The disassembly option implies that the demands of service parts can be fulfilled by newly manufactured parts, but also by disassembled parts. The disassembled parts are the ones recovered after the disassembly of end-of-use/life products. The objective of the considered problem is to maximize the total profit, i.e., the revenue of selling the service parts minus the total cost of the fixed setup, production, disassembly, inventory holding, and disposal over a planning horizon. This paper proves that the single-period version of the considered problem is NP-hard and suggests a heuristic by combining a simulated annealing algorithm and a linear-programming relaxation. Computational experiment results show that the heuristic generates near-optimal solutions within reasonable computation time, which implies that the heuristic is a viable optimization tool for the service parts inventory management. In addition, sensitivity analyses indicate that deciding an appropriate price of disassembled parts and an appropriate collection amount of EOLs are very important for sustainable service parts systems.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.187-198
• /
• 1996

The industrial use of MMMF(man-made mineral fibers), has been increasing, particularly since the banning of most asbestos products. Fibrous minerals can cause health abnormalities currently associated with occupational exposure to glass fiber. This study was conducted to evaluate health risks of glass fiber manufactory workers within the country. We examined questionaries, physical examination including auscultation, chest x-ray, pulmonary function test for 488 male workers, to go through their dermal itching symptoms and respiratory evaluation. we had the results as follows. 1. In 45% of the workers itching had been expressed at their entrance. At that time we was investigating, 18.5% had itching, and most of them complained it when they fall asleep and night. The Sequent itching site is waist and groin, upper and lower extremity in order, and it had been expressed mainly during summer and winter. 2. As the results of ventilatory functions test, 6.0% were obstructive type, 1.0% were restrictive type. So, glass fiber exposures should be controlled or elimination by protective devices in the workplace. 3. The means of FVC, $FEV_1,\;FEV_1%$ were in normal range. As the comparison of ventilatory functions by age groups, MMF was decreased significantly for the group, 50 years old and more than other groups. And the comparison by the serving periods at glass fiber producing factory, MMF was decreased for the workers had worked for $11\sim15$ years. Therefore, MMF be more sensitive index in the evaluation of ventilatory impairments caused by glass fiber workers.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.285-292
• /
• 2008

The purpose of this study is to provide the fundamental data needed in analyzing customer needs and understanding products in developing designs, to help designers to have better understanding of digital camera products, and to support the setting of concepts in developing designs, by understanding the specific properties of products that have specific purposes. In this study, homogeneity analysis was performed to the collected products launched from 2000 until now and representative products were selected to extract the questions on the adjectives and preferences felt form such products. Based on the questions, basic questionnaire survey and subject image analysis was performed in relation to the elements of images preferred by customers through the regression analysis of dependent variables and preferences and the regression analysis of purchasing power. When we design for digital camera, we must consider about the elements of digital cameras and the terms convenient, sensitive, functional, and grace. In terms of whole trend of shape, the shape highlighting grips and the digital cameras having grips, large LCD, dark colors, and manual buttons were preferred.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.109-124
• /
• 1996

This study was performed to evaluate the performance of three passive samplers made in U.S.A. Three passive samplers selected for this study included products made by 3M, Gilian, and SKC in U.S.A. Three organic solvents, such as toluene, trichloroethylene, and n-hexane which are used frequently in Korean industry were selected for the study. Conclusions obtained from this study are summarized as follows. 1. For toluene and trichloroethylene, the overall accuracy of the results from all of three products was within 25 %, which is the criteria recommended by the U.S. National Institute for Occupational Safety and Health (NIOSH). For n-hexane, the overall accuracy of the results from two products except 3M was exceeding 25 %. Thus 3M product showed the best accuracy among three products. 2. When passive samplers collected organic vapors were exposed to clean air for two hours, there were 12 - 16 % loss of organic vapors due to reverse diffusion in Gilian products. There was no significant loss in results from other two products. 3. Air velocity affected greatly on the performance of passive samplers which did not have permeation membrane. At high velocity, 100 cm/sec, accuracies of results from Gilian and SKC were 57 - 108 and 128 - 164 %, respectively. However, the results from 3M samplers, which contain permeation membrane, indicated accuracy below 25 %. 4. When passive samplers collected organic vapors for eight hours, the accuracy was reduced. Thus, it is recommended that passive samplers be used for less than four hours.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.61-71
• /
• 2006

Environment-friendly shock-absorbing (cushioning) materials were made using a vacuum forming method from waste wood collected from local mountains in Korea. The waste wood was pulped by thermomechanical pulping. The TMP cushions showed superior shock-absorbing properties with lower elastic moduli compared to EPS(Expanded Polystyrene) and pulp mold. Even though the TMP cushions made using at different suction times had many free voids in their inner fiber structures, their apparent densities were a little higher than EPS and much lower than pulp mold. The addition of cationic starch improved elastic modulus of the TMP cushions without increasing the apparent density, which was different from surface sizing with starch. The porosity of the TMP cushions was a little greater than EPS and much less than pulp mold. Finally, the TMP cushions have great potential to endure external impacts occurring during goods distribution.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.

• IE interfaces
• /
• v.23 no.2
• /
• pp.182-192
• /
• 2010

Customer needs for final products are very unpredictable because product specifications and technologies are being improved very quickly thereby their requirement level is also elevated correspondingly. In order to survive and to enhance competitiveness in the global market, many manufacturing companies are trying to find a breakthrough from collaborization. Even though they want to collaborate with others, however, they do not exactly know what kind of system they have to develop or which technology they have to use. In this paper, therefore, we first investigate status and trend of information systems and infrastructure that are essential for collaboration. We then clearly describe definition and classification of collaboration with various point of views considering collaboration pattern, timing condition of collaborative activities, organizational structure, etc. With web-based collaboration systems already developed by i-Manufacturing (Korean-style Manufacturing Innovation) project, led by Korean government from 2004, we introduce main functions and analyze collaboration types of each system. Strategically important technologies for supporting collaboration will also be illustrated by reorganizing collaborization technologies after evaluating them with respect to emergency and importance of each technology. We hope this research will provide a guideline on collaboration especially for small and medium sized manufacturing companies.

• Nutrition Research and Practice
• /
• v.10 no.4
• /
• pp.464-470
• /
• 2016

BACKGROUND/OBJECTIVES: This research analyzes the effects of the food choices of industrial workers according to their sugar intake pattern on their job satisfaction through the construction of a model on the relationship between sugar intake pattern and job satisfaction. SUBJECTS/METHODS: Surveys were collected from May to July 2015. A statistical analysis of the 775 surveys from Kyungsangnam-do was conducted using SPSS13.0 for Windows and SEM was performed using the AMOS 5.0 statistics package. RESULTS: The reliability of the data was confirmed by an exploratory factor analysis through a Cronbach's alpha coefficient, and the measurement model was proven to be appropriate by a confirmatory factor analysis in conjunction with AMOS. The results of factor analysis on food choice, sugar intake pattern and job satisfaction were categorized into five categories. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all factors except confection (0.516) and dairy products (0.570). The multicollinearity results did not indicate a problem between the variables since the highest correlation coefficient was 0.494 (P < 0.01). In an attempt to study the sugar intake pattern in accordance with the food choices and job satisfaction of industrial workers, a structural equation model was constructed and analyzed. CONCLUSIONS: All tests confirmed that the model satisfied the recommended levels for the goodness of fit index, and thus, the overall research model was proven to be appropriate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.701-710
• /
• 2018

This study aims to verify the mediating effect of perceived risk of internet shopping mall users' innovativeness on product purchase intention. Research subjects included consumers with prior experience of using internet shopping malls, and 405 respondents were used for final analysis. The major findings of the study are as follows: First, as a result of the investigation on the relationships among users' innovativeness, perceived risk, and product purchase intention, all correlation coefficients were positive. Second, consumer innovativeness was found to significantly influence perceived risk and purchase intention, and perceived risk mediated the relationship between consumer innovativeness and purchase intention. Third, when we performed sub-group analysis on the research model by dividing products into hedonic and utilitarian products, it was found that hedonic products revealed path coefficients which are statistically more significant compared with those for utilitarian products. We can draw the conclusion that in terms of internet shopping mall purchases, hedonic products exert a greater influence on the effect of consumer innovativeness on purchase intention compared to utilitarian products.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.13-19
• /
• 2005

Biotechnological researches in Central Asian Research Institute of Sericulture were developed since 1981 when laboratory of artificial diets for mulberry silk­worm was created. The researches were directed not only to creation of accessible artificial diets (AD) for off-season mass rearing of economical beneficial insect and for industrialization of sericulture but also to obtaining of easy reproducible source of animal proteins, carbohydrates, lipids, enzymes, enzymes inhibitors and other metabolites - bioresource for manufacture of oriental medicine preparations. Space experiments with silkworms became possible with use of AD. These experiments used mulberry silkworm as high effective board test organism with outstanding developmental, reproductive and transgenic properties having impor­tant significance in future of cosmonautics. Introduction to practice of bioprotective and ecologically pure method of drying and sterilizing of green cocoons and by-products of silk manufacture allows to increase efficiency of cocoons reeling technology as well as to preserve nativity of biological active substances in mulberry silkworm pupae that is unachievable by traditional methods of raw material processing. New spheres of application of two important silk proteins - fibroin and sericin in medicine, cosmetics, for bio- and nanotechnology are opening with use of biotechnological approaches. At present the achievements and experience of R & D in these fields are used in creation of modern pests biocontrol agents. Schemes of efficient processing of cocoon raw material, by-products and wastes of sericulture and cocoon processing are devel- Institute of Physiology and Biophysics, Uzbek Academy of Sciences, I, Niyazov street, 700095, Tashkent, Uzbekistan. oped for obtaining of traditional and new consumer products.