• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.919-922
• /
• 2006

Comparing with the conventional transformer without the air gap, a contact-less transformer with the large air-gap (4.8cm) between the long primary winding and the secondary winding has the increased leakage inductance and the reduced magnetizing inductance. By the increased leakage inductance and the reduced magnetizing inductance on the primary of the contact-less transformer, a good deal of the primary current circulates through magnetizing inductance, which results in a massive loss in contact-less power supply (CPS). In this paper, the efficiency characteristics of the contact-less power supply using a series resonant converter is analyzed and simulated. The results are verified on the simulation based on the theoretical analysis and the 1.8kW experimental prototype.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.226-234
• /
• 2010

본 논문은 실제적인 변압기 운전환경에서 변화하는 승압형 인덕턴스를 실시간으로 추정하여 그 값을 통해 이득값을 계산하는 전향제어기를 제안하였다. 승압형 인덕턴스는 입력 전류의 변화분과 입력 교류 전압의 측정치만을 이용하여 추정되고, 그 값은 최소자승법을 적용하여 최적화 된다. 제안된 전향제어기는 변압기 운전 환경의 변화에도 강인한 제어가 가능하며, 입력 전류의 고조파 성분을 감소시켜 간섭현상에 따른 성능 저하를 최소화 할 수 있다. 제안된 기법의 타당성은 시뮬레이션과 실험 결과를 통해 검증하였다.

• 전기학회논문지
• /
• 제68권3호
• /
• pp.430-438
• /
• 2019

For a pump or a compressor motor, a high periodic load torque variation is induced by the mechanical works, and it causes system vibration and noise. To minimize these problems, load torque compensation method, injecting periodic torque current, could be utilized. However, with the sensorless control method, which is usually utilized in the pump and compressor for low cost, the periodic torque current degrades the accuracy of the rotor position estimation owing to the inductance variation. This paper analyzes the rotor position and speed estimation error of sensorless control method with constant motor parameters under period loading. Assuming the constant speed by the accurate load torque compensation, the speed error equation is derived in frequency domain with inductance depending on the stator current. Further, it is also shown that the rotor position error could be minimized by compensating the inductance variation. The simulation and experimental results verify that the derived speed error model and the validity of the inductance compensation method.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.984-988
• /
• 2004

This study presents the process of the solenoid parameter estimation of an common-rail injector fer HSDI(High Speed Direct Injection) diesel engines. The EMF(Electromotive Force) and solenoid inductance are the major parameters for presenting the injector dynamics, and also these parameters are estimated by using a multi-layer feedforward artificial neural networks(ANN). The performances of parameter estimators are verified by the simulation with injector model. The feasibility of this methodology is closely examined through the simulation in the various operating points of injector. The simulation results have revealed that estimated parameters show favorable agreements with the common-rail injector model.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1996년도 춘계연구발표회 논문개요집
• /
• pp.66-67
• /
• 1996

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.20-21
• /
• 1995

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.353-358
• /
• 2020

일반적인 나선형 인덕터의 경우에 비대칭 구조를 가짐에 따라 포트의 방향에 영향을 받게 된다. 본 논문에서는 단층이면서 대칭 구조를 가질 수 있는 나선형 인덕터를 제안하고 시뮬레이션 및 주파수 특성을 분석하였다. 일반적인 나선형 인덕터는 포트의 기준에 따라 주파수-인덕턴스 특성, 주파수-품질계수 특성, 자기공진주파수가 큰 차이를 보이는 반면에, 제안된 대칭 나선형 인덕터는 포트에 변함없이 2.7nH의 인덕턴스, 약 7.86의 품질계수, 약 14.1GHz의 자기공진주파수를 가진다. 이는 기존 일반적인 나선형 인덕터가 포트에 따라 큰 차이를 갖는 것과 비교하여 포트의 방향에 대한 영향이 적은 것을 확인할 수 있었다. 다만, 코일의 점유 면적에 비하여 상호 인덕턴스가 줄어들어 낮은 인덕턴스를 가지며, 인덕턴스 증가보다 코일의 저항이 더 증가하여 품질계수 또한 낮아짐을 확인할 수 있었다. 향후에는 2층 대칭 나선형 구조를 통하여 인덕턴스와 품질계수를 향상시킬 수 있을 것으로 기대된다.

• 전력전자학회논문지
• /
• 제18권3호
• /
• pp.263-269
• /
• 2013

The flyback converter has been applied widely in isolated DC/DC power converters because this converters employ a single MOSFET switch. The leakage inductance should be minimized for high efficiency of flyback converter. but in reality, it is very difficult. Namely, The Snubber circuit is essential to recover the leakage inductance stored energy when the switch is turn off. Flyback Converter typically operates in DCM mode and when switch is turn off in hard switching, this hard switching action results in a high power losses and switching stresses. In order to overcome these problems, a novel soft switching flyback converter using resonant snubber circuit is proposed in this paper. The resonant snubber circuit is composed of the transformer leakage inductance and a capacitor. To verify and confirm the proposed resonant snubber circuit, PSIM simulation and hardware prototype are implemented. Simulation and Experimental results indicate that the proposed resonant snubber circuit is effective.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.329-330
• /
• 2014

This paper presents an analysis of the interleaved effects for the secondary winding distribution of a toroidal transformer. The equations to calculate the leakage inductance are derived using the MMF diagram for the distributed secondary windings. The simulation and experimental results are provided to show the effect of the leakage inductance reduction.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.793-800
• /
• 2011

This paper investigates the operational modes of buck dc-dc converters and their energy transmission methods. The operational modes of such converters are classified in two types, discontinuous conduction mode (DCM) and continuous conduction mode (CCM). In this paper, the critical inductance relation of DCM and CCM is determined. The equations of the output voltage ripple (OVR) for each mode are obtained for a specific input voltage and load resistance range. The maximum output voltage ripple (MOVR) is also obtained for each mode. The filter size is decreased and the minimum required inductance value is calculated to guarantee the minimization of the MOVR. The experimental and simulation results in PSCAD/EMTDC prove the correctness of the presented theoretical concepts.