• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.828-836
• /
• 2005

Impingement/effusion cooling technique is used for combustor liner or turbine parts cooling in gas turbine engine. In the impingement/effusion cooling system, the crossflow generated in the cooling channel induces an adverse effect on the cooling performance, which consequently affects the durability of the cooling system. In the present study, to reduce the adverse effect of the crossflow and improve the cooling performance, circular pin fins are installed in impingement/effusion cooling system and the heat transfer characteristics are investigated. The pin fins are installed between two perforated plates and the crossflow passes between these two plates. A blowing ratio is changed from 0.5 to 1.5 for the fixed jet Reynolds number of 10,000 and five circular pin fin arrangements are considered in this study. The local heat/mass transfer coefficients on the effusion plate are measured using a naphthalene sublimation method. The results show that local distributions of heat/mass transfer coefficient are changed due to the installation of pin fins. Due to the generation of vortex and wake by the pin fin, locally low heat/mass transfer regions are reduced. Moreover, the pin fin prevents the wall jet from being swept away, resulting in the increase of heat/mass transfer. When the pin fin is installed in front of the impinging let, the blockage effect on the crossflow enhances the heat/mass transfer. However, the pin fin installed just behind the impinging jet blocks up the wall jet, decreasing the heat/mass transfer. As the blowing ratio increases, the pin fins lead to the higher Sh value compared to the case without pin fins, inducing $16\%{\~}22\%$ enhancement of overall Sh value at high blowing ratio of M=1.5.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권4호
• /
• pp.198-205
• /
• 2022

Along with a variety of coding education, physical computing education for controlling various sensors is being actively conducted for elementary, middle, and high school students in line with the era of the fourth industrial revolution. A problem with physical computing education using Arduino is pin connection errors between Arduino and various sensors. Most of the students who come into contact with the Arduino for the first time often do not know the purpose of the Arduino pin and the connection position of the pin. Also, hardware built with incorrect pin connections to the Arduino board often does not work properly. If this case continues, students will lose interest in coding education. Therefore, in this paper, we implemented an augmented reality application that informs the connection process of the Arduino board and the sensor during physical computing coding education using Arduino, and designed and implemented educational content for the Arduino pin position and connection process. First, we explain the role of the Arduino board and the sensor and the location of the pins. After that, the students run the educational augmented reality educational content using their smartphones and check the correct pin connection process between the Arduino and the sensor. In the physical computing education, augmented reality content is used to increase the understanding and immersion of the class. It is expected that the educational effect will also increase by inducing fun and interest in physical computing coding education.

• 한국재료학회지
• /
• 제18권9호
• /
• pp.497-502
• /
• 2008

BGA test sockets failed earlier than the expected life-time due to abnormal signal delay, shown especially at the low temperature ($-50^{\circ}C$). Analysis of failed sockets was conducted by EDX, AES, and XRD. A SnO layer contaminated with C was found to form on the surface of socket pins. The formation of SnO layer was attributed to the repeated Sn transfer from BGA balls to pin surface and instant oxidation of fresh Sn. As a result, contact resistance increased, inducing signal delay. Abnormal signal delay at the low temperature was attributed to the increasing resistivity of Sn oxide with decreasing temperature, as manifested by the resistance measurement of $SnO_2$.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.128-131
• /
• 2010

In this paper, we propose a new design of the permanent magnet reluctance wheel which will make it possible to attach the robot to a vertical plane and move it. In the newly suggested design, a permanent magnet is utilized to enhance the adhesive force during attachment, and an electromagnet is produced to weaken the magnetic field of the permanent magnet and reduce the adhesive force for easier detachment of wheels from steel plates. To characterize the performance of this new wheel design, a 3-D finite element analysis is executed using a commercial FE program. The results show that the adhesive force is reduced effectively by the electromagnet which flows in the reverse direction of the magnetic loop of the permanent magnet when the current is supplied to the coil.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.143-149
• /
• 2002

Robot are necessary to automate the work on a vertical plane of work piece to produce a large structure like a ship, so that a permanent magnet wheel has been attempted to be used for a mobile robot. Its adhesive power was enhanced by restricting the occurrence direction of magnetic flow. Furthermore a method which weakened the adhesive force was developed for easy detachement of the wheel by changing magnetic flow with metal pin. To measure the characteristics of the adhesive and detaching farces, a load call and a gaussmeter were used. The result showed that the adhesive power was reduced to 1/3 of normal state by using 4 inducing pins.

• 한방재활의학과학회지
• /
• 제29권3호
• /
• pp.149-156
• /
• 2019

This study was performed to evaluate the effectiveness of pharmacoacupuncture treatment of coccygodynia caused by perforating cutaneous nerve entrapment syndrome. Two patients were diagnosed as coccygodynia caused by perforating cutaneous nerve entrapment syndrome which pain was within the anatomical field of the nerve, worsened by pressure-inducing posture, no objective sensory loss and in presence of pin-point tenderness. They were treated by pharmacoacupuncture at perforating cutaneous nerve region penertrating the sacrotuberous ligament and local tenderness point of coccyx. The evaluation of clinical outcome was done by pain intensity numerical rating scale (PI-NRS), pressure pain threshold (PPT) and EuroQol five dimensions questionnaire (EQ-5D) index. After treatment, their PI-NRS was decreased, PPT and EQ-5D index were increased. The pharmacoacupuncture therapy at entrapment point of perforating cutaneous nerve could be an effective way to treat coccygodynia caused by perforating cutaneous nerve entrapment syndrome.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.268-276
• /
• 2023

The representative branch of ICT education is Arduino. However, there are various problems when teaching using Arduino. Arduino requires a complex understanding of hardware and software, and this can be perceived as a difficult course, especially for beginners who are not familiar with programming or electronics. Additionally, the process of connecting the pins of the Arduino board and components must be accurate, and even small mistakes can lead to project failure, which can reduce the learner's concentration and interest in learning Arduino. Existing Arduino learning content consists of text and images in 2D format, which has limitations in increasing student understanding and immersion. Therefore, in this paper analyzes the necessary conditions for sprouting 'growing kidney beans' in the first semester of the fourth grade of elementary school, and builds an automated experimental environment using Arduino. Augmented reality of the pin connection process was designed and produced to solve the difficulties when building an automation system using Arduino. After 3D modeling Arduino and components using 3D Max, animation was set, and augmented reality (AR) content was produced using Unity to provide learners with more intuitive and immersive learning content when learning Arduino. Augmented reality (AR)-based Arduino learning content production is expected to increase educational effects by improving the understanding and immersion of classes in ICT education using Arduino and inducing fun and interest in physical computing coding education.

• 생명과학회지
• /
• 제26권3호
• /
• pp.325-330
• /
• 2016

본 연구에서는 선행 연구에서 항당뇨 효능이 확인된 Ceriporia lacerata 균사체 배양물 건조물(CL01)을 3T3-L1 세포에 인슐린과 병용 혹은 단독 처리하여 CL01이 세포 단계에서 인슐린 신호 전달에 미치는 영향을 분석하였다. 분화된 3T3-L1 세포에서 포도당 흡수 정도를 측정한 결과, 인슐린과 CL01을 병용 처리한 군에서 농도 의존적으로 유의적으로 포도당 흡수 정도가 증가하였고, 인슐린 부재 상태에서 CL01을 처리하였을 때는 포도당 흡수 작용이 거의 일어나지 않았음을 확인하였다. 또한 분화된 세포에서 인슐린 신호 전달 관련 단백질 및 mRNA 발현을 측정한 결과, IRβ, Akt, PI3K, AMPK 단백질의 인산화가 진행되었고, GLUT4 mRNA 발현이 증가하였음을 알 수 있었다. 이들 결과를 통해 CL01이 당 대사 및 인슐린 신호 전달에 관여하는 유관 단백질 및 유전자 발현에 영향을 미치며 이에 따라 세포 내로 포도당 흡수를 증가시키는 것을 확인하였다.

• 한국식품과학회지
• /
• 제45권3호
• /
• pp.350-355
• /
• 2013

본 연구에서는 효모를 이용하여 제조한 미나리 천연 식초 및 원료로 사용된 미나리 발효액의 유리당, 유기산, 아미노산 함량을 측정하였으며, 미나리 식초의 뇌 기능 개선 관련 기능성을 확인하기 위하여 C6 흰쥐 신경아교세포를 이용하여 산화적 손상에 대한 보호 효과를 검토하였다. 미나리 식초는 약 5%의 초산을 함유하였으며 glucose는 검출되지 않아 초산발효가 잘 이루어진 것을 알 수 있다. 또한 유리 아미노산의 함량은 높지 않았으나 그 중 aspartic acid, arginine 그리고 valine이 주요 유리 아미노산으로 나타났으며, 발효액에서는 aspartic acid, alanine, GABA의 순으로 나타났다. 총 아미노산은 식초에서는 glutamic acid와 glutamine의 함량이 가장 높았으며, 발효액의 경우 aspartic acid와 asparagine이 주요 총 아미노산으로 나타났다. 미나리 식초의 효능을 평가하기 위하여 식초를 동결 건조하여 분말화한 식초의 산화적 손상에 대한 뇌 신경세포 보호 효과를 측정한 결과, 발효액과 식초 모두 C6 세포에 대한 독성은 없었으며 t-BHP 및 $H_2O_2$에 의한 세포 생존율 저하를 유의적으로 억제하는 효과를 확인하였다.

• 생명과학회지
• /
• 제23권4호
• /
• pp.510-517
• /
• 2013

본 연구에서는 초임계를 이용한 계피 오일 추출물(SFC)과 오일 추출 후 남은 부산물인 박(SFM), 그리고 80% methanol (ME) 계피추출물을 이용하여 항비만 효과를 비교하고 어떤 계피의 어떤 성질의 성분이 비만에 더 효과적인지 알아보았다. 3T3-L1 preadipocyte의 성숙한 지방세포로 분화시키기 위해 iso-butylmethylanthine (IBMX), dexamathasone, insulin을 SFC, SFM, ME를 처리하고 Real time PCR을 이용하여 전사인자 발현을 확인하였다. 그 결과 SFC에서 mRNA 수준에서 peroxisome-proliferators-activated-receptor-${\gamma}$ ($PPAR{\gamma}$), CCAAT enhancer-binding-protein ${\alpha}$ ($C/EBP{\alpha}$)의 저해능이 세 가지 조건 중에서 가장 높았으며, 또한 SFC는 peroxisome-proliferators-activated-receptor-${\gamma}$ ($PPAR{\gamma}$), CCAAT enhancer-binding-protein ${\alpha}$ ($C/EBP{\alpha}$) sterol-regulatory-element-binding protein-1c (SREBP1c)와 acyl-CoA synthetase-1 (ASC1), fatty acid synthesis (FAS), fatty acid transport-1 (FATP1), fatty acid binding protein-4 (FABP4) 그리고 perilipin의 전사인자도 농도유의적으로 감소시켰다.