• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.248-256
• /
• 2008

The study aims at verifying no generation of electrical power induced noise voltage on telecommunications lineside cable by analyzing the practical findings of noise voltage produced at the telecommunication lines in the vicinity of electrified high-speed railways like KTX, while proposing to make the current standard measurement circuit along with its measuring conditions revised in compliance with international ITU-T recommendations by identifiably finding out the present problems in balance level measuring instruments as well as their errors in the measurement method now applicable by local telecommunications companies and the Radio Research Laboratory.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.4
• /
• pp.197-202
• /
• 2013

Large gains in speech intelligibility can be obtained using the SNR-based binary mask approach. This approach retains the time-frequency (T-F) units of the mixture signal, where the target signal is stronger than the interference noise (masker) (e.g., SNR > 0 dB), and removes the T-F units, where the interfering noise is dominant. This paper introduces two alternative binary masks based on the distortion constraints to improve the speech intelligibility. The distortion constraints are induced by a gain function for estimating the short-time spectral amplitude. One binary mask is designed to retain the speech underestimated (T-F) units while removing the speech overestimated (T-F)units. The other binary mask is designed to retain the noise overestimated (T-F) units while removing noise underestimated (T-F) units. Listening tests with oracle binary masks were conducted to assess the potential of the two binary masks in improving the intelligibility. The results suggested that the two binary masks based on distortion constraints can provide large gains in intelligibility when applied to noise-corrupted speech.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.1
• /
• pp.17-29
• /
• 1999

Objectives. This study was carried out to analyze the hearingthreshold levels and relating factors of 1,048 workers with noiseinduced hearing loss$(D_1)$. Methods. We analyzed the hearing-threshold levels and relating factors of 1,048 workers with noise-induced hearing loss$(D_1)$ examined by the summary reports of specific health examination results of industries and personal reports of specific health examination results reported by 58 specific health examination institutes and 8 secondary pneumoconiosis examination institutes in 1996. Results. Among 1,048 workers at 510 workplaces, male workers were 1,009 (96.3%) and female workers were 39 (3.7%). The mean ages of workers initially exposed to noise and at present were 28.7 and 47.2, respectively. The duration of total exposure was 16.5 years. Average hearing-threshold levels analyzed by three-divided classification of the study subjects were 43.7dB(Lt) and 42.6dB(Rt). Those analyzed by six-divided classification were 50.5dB(Lt) and 48.6d8(Rt). Among workers with noise-induced shearing loss$(D_1)$, 16.3% was unilateral hearing loss and 84.6% was classified to compensation case. 8.8%(Rt) and 10.2%(Lt) of them were suspected to be conductive hearing loss by differences of air-bone hearing-threshold levels. Hearing-threshold levels of workers in manufacturing industry were significantly increased during the short exposure compared with the levels in mining industry. Among manufacturing industries, hearing-threshold levels of workers in trailer and other transportation equipment manufacturing industry were significantly increased. Age and duration of total noise exposure were not significantly related to the average hearing-threshold levels analyzed by three-divided classification. Hearing-threshold levels of female workers were significantly increased during the short exposure compared with those of male workers. Hearing-threshold levels of workers at the high risk group, ages of 20s, 30s and total exposure duration of less than 10 years, were not significantly increased compared with those of the other groups. However, they were exposed at young ages. The 3 leading industries of workers at high risk group were trailer and other transportation equipment manufacturing, automobile manufacturing and assemble-metal manufacturing industries. Conclusions. This study was the first nationwide analysis of the hearing-threshold levels and relating factors of workers with noise. induced hearing loss$(D_1)$. We found the differences of the real number by the statistics of the department of labour and the expected number of worker' s compensations for occupationally-induced hearing loss estimated by this study. According to the results of this study, we should carefully examine the methods to narrow this difference.

• Safety and Health at Work
• /
• v.2 no.4
• /
• pp.348-354
• /
• 2011

Objectives: This cross-sectional study was performed in the Dental School of Prince of Songkla University to ascertain noise exposure of dentists, dental assistants, and laboratory technicians. A noise spectral analysis was taken to illustrate the spectra of dental devices. Methods: A noise evaluation was performed to measure the noise level at dental clinics and one dental laboratory from May to December 2010. Noise spectral data of dental devices were taken during dental practices at the dental services clinic and at the dental laboratory. A noise dosimeter was set following the Occupational Safety and Health Administration criteria and then attached to the subjects' collar to record personal noise dose exposure during working periods. Results: The peaks of the noise spectrum of dental instruments were at 1,000, 4,000, and 8,000 Hz which depended on the type of instrument. The differences in working areas and job positions had an influence on the level of noise exposure (p < 0.01). Noise measurement in the personal hearing zone found that the laboratory technicians were exposed to the highest impulsive noise levels (137.1 dBC). The dentists and dental assistants who worked at a pedodontic clinic had the highest percent noise dose (4.60 ${\pm}$ 3.59%). In the working areas, the 8-hour time-weighted average of noise levels ranged between 49.7-58.1 dBA while the noisiest working area was the dental laboratory. Conclusion: Dental personnel are exposed to noise intensities lower than occupational exposure limits. Therefore, these dental personnel may not experience a noise-induced hearing loss.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4E
• /
• pp.183-196
• /
• 2003

General algorithm is developed for the prediction of internal flow-induced noise. This algorithm is based on the integral formula derived by using the General Green Function, Lighthill's acoustic analogy and Curl's extension of Lighthill's. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve are compared with actual measurements. This illustrative computation shows that the current method penn its generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.

• Journal of the Korean Society of Combustion
• /
• v.13 no.4
• /
• pp.8-15
• /
• 2008

When a circular cylinder is placed at the center of a slot burner nozzle, once stable Woflhard-Parker type laminar lean premixed flame is changed to an oscillating flame with self-induced noise. The wrinkled flame surface showed the same pattern and frequency of the Karman vortex street at the downstream of a circular cylinder. The interaction of flame with Karman vortex street is observed to be responsible for flame oscillation. The measured flame oscillation frequency is very similar to the estimated Karman vortex shedding frequency based on the St-Re relationship of the flow past circular cylinder, which could be considered as a strong evidence for the interaction between laminar pre-mixed flame and a Karman vortex street. As Reynolds number increases oscillation frequency decreases and the self-induced noise level increases as well as the flame front is more severly wrinkled. This result suggests that the flame/vortex interaction becomes more active at higher Re.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.10-15
• /
• 2010

Good performance of spectral-amplitude-coding optical CDMA can be obtained using codes based upon Hadamard matrices, but Hadamard codes have very restrictive code lengths of $2^n$. In this paper a new code family, namely extended Hadamard code, is proposed to relax the code length restriction and the number of simultaneous users. The improved performance of the proposed system is analysed with the consideration of phase-induced intensity noise(PIIN).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.4
• /
• pp.1-5
• /
• 2011

A new code structure for spectral-amplitude-coding optical CDMA based upon reconstructed modified double weight codes is proposed. The newly proposed code possesses ideal cross-correlation properties. By using fiber Bragg grating(FBG) in front of optical decoder, we can get the improved performance of the proposed system with the consideration of phase-induced intensity noise(PIIN).

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1789-1794
• /
• 2004

The present study investigates flow characteristics in an optical disc drive. Detailed knowledge of the flow characteristics is essential to analyze flow-induced noise and vibration, forced convection and flow friction loss. The ODD used in the personal computer is used for the experiment and rotating velocity of disc is under the 4500 rpm. Time-resolved velocity components and velocity spectrum are obtained using the laser Doppler anemometry (LDA). The results show that the front holes reduce now-induced noise and the position of pickup body affects flow near the window. In addition, il is possible for cooling of heat sources in an optical disc drive through measuring the flow fields under the tray.

• Research in Community and Public Health Nursing
• /
• v.16 no.1
• /
• pp.59-67
• /
• 2005

This study was to investigate knowledge, attitude and the preventive behaviour of noise of workers exposed to harmful noise and to provide primary data for noise-exposed workers' hearing conservation and the prevention of noise induced hearing loss. Method: The subjects were 104 workers who participated voluntarily in the questionnaire. The instrument used in this study was knowledge, attitude and practice on noise-induced hearing loss tool by Rhee & Yi (1996). The data were collected from August to September, 2002 with a self-administered questionnaire. Data were analyzed by SPSS 10.0 win program for finding frequency, percentage, mean, standard deviation, t-test, and ANOVA. Results: The average age of workers was 35.9 and the current average year of working at the noise place was $5{\sim}$10 years. In the group of previous noise-exposed workers, they showed significant difference in preventive behaviors (t=4.087, p=.048). In the group of current noise-exposed workers, they showed significant difference in recognition and attitude of noise(F=4.707, p=.004). Also, the duration of wearing ear protection equipment(t=2.383, p=.019), the feeling of wearing ear protection equipment(F=3.602, p=.031) and comfortable sense of wearing ear protection (F=3.919, p=.023) was significant in the preventive behaviour of noise. Conclusion: Considering the results above, we can recognize that there are close relations among the knowledge, attitude and the preventive behaviour of noise. Therefore, it is necessary to develop education - programs for noise-exposed workers' better understanding of noise and preventive behaviors