• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.177-178
• /
• 2006

The real-time tracking system is an essential factor for the development of low cost sensor networks for use in pervasive computing and ubiquitous networking. In this paper, we address the interference problems of the sensor network platform with ultrasonic for location tracking system. Ubiquitous indoor environments often contain substantial amounts of metal and other such reflective materials that affect the propagation of radio frequency signals in non-trivial ways, causing severe multi-path effects, dead-spots, noise, and interference. Especially we present a novel reducing interference location system that is particularly well suited to support context-aware computing. The system called Pharos, aims to combine the advantages of real-time tracking systems that implement distributed environment with regardless of infrastructure or infrastructure-less wireless sensor networks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2006

This paper presents methods of robot localization using recent radio frequency identification technology. If the absolute position and orientation of a tag are given in an indoor environment where RFID tags are installed, a robot can estimate its location using the relationship of the identified tag and the robot in a relative coordinate. To derive this relationship, we propose three estimation techniques using a model of a RFID reader, the direction of identification and the detection range. In this algorithm, a suitable estimation method is selected out of the three proposed techniques depending on the situations and trajectory of robot in the detection range. Simulation and experimental results show that the proposed methods can provide good performance for localization.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.416-416
• /
• 2004

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.24-29
• /
• 2006

In this paper, we analyzed new two-branch polarization diversity at the receiving end of a mobile link which a transmitter emits circularly polarized wave. To analyze the correlation coefficient considered by XPD(Cross Polarization Discrimination) between the two received signals, a simple theoretical model of circular polarization diversity is adopted and experimental measurements are also conducted. From both theoretical and measurement results, it can be seen that the proposed circular polarization diversity scheme is more effective than that of the conventional linear polarization diversity.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.256-258
• /
• 2005

최근 유비쿼터스 컴퓨팅 기술이 활발하게 연구되고 있는 실점에서 상황인지 (Context Aware)에 의한 위치 기반 서비스 (LBS : Location Based Service)와 POI(Point of Interest) 서비스가 활발히 연구되고 있다. 그러나 실외 위치 측위를 위한 GPS의 이용이 불가능한 실내 이동 환경에서는 사용자의 위치 변화 인지가 불가능하므로. 실내에서의 위치 기반 서비스를 위해서는 실내 환경에 적합한 위치측위 방식을 고려하여야 한다. 최근 물류 관리나 사용자 인증 등에 주로 사용되고 있는 RFID (Radio frequency IDentification)는 비접촉 인식 기술로서 위치 ID를 이용하여 실시간으로 실내의 위치 변화에 반응하도록 함으로써 실내 측위 시스템으로의 응용이 가능하다. 본 연구에서는 RFID를 이용해 실시간으로 위치 ID를 인지해 실내 위치 정보를 획득하고, XML 웹서비스와 벡터기반의 SVG를 이용하여 이동 클라이언트인 PDA에 사용자 위치정보를 적용한 실내 공간 정보 서비스 및 POI 서비스가 가능하도록 실내 위치 측위 시스템을 설계하고 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.139-141
• /
• 2019

This paper proposes the application of LoRa network, which has been under various research recently, to use control system for the transfer of Unmanned Vehicle. LoRa( Long Range) has a wide coverage of up to30 km, and is characterized by large-scale low-power long-distance radio communication. LoRa has already been studied in various industries. It is also proposed to study various functions by utilizing LoRa network and applying it to the control system of the uninhabited entity.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.251-258
• /
• 2010

In an indoor localization method taking the lateration-based approach, the location of a target is estimated with the location of anchor points (APs) and the approximated distances between the target and APs using received signal strength (RSS) measurements. The accuracy of distance estimation affects the localization accuracy of a lateration-based method. Since a radio propagation environment varies randomly in time and space, the highest RSSs do not necessarily give the best estimation of the distances between a target and APs. Thus, all APs hearing a target have been used for localization. However, the accuracy of a lateration-based method degrades if more APs beyond a certain threshold are used because the area of polygon with the APs increases. In this paper, we focus on reducing the size of the polygon to further increase the localization accuracy. We use the centroid of the polygon as a reference point to estimate the relative location of a target in the polygon. Once the relative location is estimated, only the APs which are closest to the target are used for localization to reduce the area of the polygon with the APs. We validate the proposed method by implementing an indoor localization system and evaluating the accuracy of the proposed method in the various experimental environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.302-311
• /
• 1999

In this paper, in order to suggest an optimal polarization diversity composition method in indoor radio wave propagation environments, the variation of the cross polarization discrimination(XPD) was theoretically analyzed by a computer simulation and compared to the actual measured data. From the results, it can be seen that the cross polarization discrimination of the case, a circularly polarized antenna was used at the transmitting end as well as the vertical and horizontal polarized antenna branches were used at receiving end (CV-CH), is lower than that of the case, horizontal polarized antenna at the transmitting end as well as the horizontal and vertical polarized antenna branches at the receiving end(HH-HV), and that of the case, vertical polarized antenna at the transmitting end as well as the vertical and horizontal polarized antenna branches at the receiving end(VV-VH). In this paper, to get more effective CV-CH polarization diversity composition, the amount of cross polarization discrimination values at the signals received by horizontal polarized antenna is compensated and the polarization diversity effect through the cumulative probability distribution is estimated. From the evaluation results, it was found that the polarization diversity effect was better at the compensated case than at the uncompensated case. On the other hand, it can be known that the polarization diversity effect is getting better as the cross polarization discrimination values are getting lower, and also be known that the effect can be improved if a transmitting antenna is composed of the ellipse polarized antenna by adjusting the axial ratio of the circularly polarized antenna and, a receiving antenna is made up of the vertical and horizontal polarized antenna branches.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1224-1230
• /
• 2007

Recently, wireless LAN are often applied in home or office because of its various of convenience. Frequency rage of wireless LAN specified by IEEE 802.11a is at 5.2 GHz and IEEE 802.11b is 2.4 GHz. But in offices with wireless LAN devices, reflection of waves against walls, ceilings, floors and desks made of metal creates multipath problems that reduce communication speed and lose data. These problems can be solved by using EM wave absorber. In this paper, we designed and fabricated EM wave absorbers using MnZn-ferrite, sendust, carbon and CPE(Chlorinated Polyethylene). The EM wave absorber with the ratio of MnZn-Ferrite : sendust : CPE=64 : 16 : 20 wt.% has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz and the EM wave absorber with the ratio of MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.% has thickness of 3.8 mm and absorption ability more than 23 dB at 5.2 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1501-1509
• /
• 2001

Recently, the use of wireless communication systems has been rapidly increasing, which results in a difficult problem in efficient control of limited frequency resources. As a way of solving this problem, the ultra wideband time hopping impulse radio system attracts much attention. The impulse radio system communicates pulse position modulated data using Gaussian monocycle pulses of very short duration less than 1 nsec. Thus the transmitted signal has very low power spectral density and ultra wide bandwidth from near D.C. to a few GHz. It is blown that it hardly interferes with the existing communication systems because of its very low power spectral density. The purpose of this paper is to characterize multipath propagation of the impulse radio signal and to evaluate the performance of the correlator-based receiver for the multipath environments. In this paper, we consider the deterministic two-path model and the statistical indoor multipath model of Saleh and Valenzuela. For the two-path model the output of the correlator with the ideal reference waveform varies according to the relative difference between the indirect path delay and the time interval of PPM, and to the indirect path gains. In addition, the characteristics of bit error rates is measured for the two models through computer simulation. The simulation results indicate that the performance of the impulse radio system depends both on the relative difference between the indirect path delay and the time interval of PPM, and on the indirect path gains. Furthermore, it is observed that the reference signal designed for the AWGN channel can not be applied to the multipath channels.