• Title/Summary/Keyword: indoor digital TV antenna

Search Result 13, Processing Time 0.019 seconds

Design parameter analysis for ATSC 1.0 single frequency networks based on receiver multipath handling performance

  • Hernandez-Flores, Mario A.;Galeano-Torres, Rodrigo;Garcia-Castillo, Miguel A.;Landeros-Ayala, Salvador;Matias-Maruri, Jose M.
    • ETRI Journal
    • /
    • v.43 no.4
    • /
    • pp.702-716
    • /
    • 2021
  • This work proposes suitable network configurations for single frequency networks (SFNs) with ATSC 1.0 based on network coverage calculations and the laboratory multipath handling performance of commercial receivers. SFNs are widely used for delivering terrestrial digital television services because of their efficient use of the spectrum. In Mexico the analogue television transmissions switch-off occurred on 31 December 2016. Thus it is expected the adopted ATSC 1.0 system will be in force for the next several years despite the recent standardization of the ATSC 3.0 system. As ATSC 1.0 uses 8-VSB modulation the multipath handling capability of receivers is critical for the design of SFNs. The presented network planning results help develop technical normativity for implementing SFNs in Mexico and other countries that use ATSC 1.0. SFNs with transmitter separation up to 130 km are fully covered for outdoor reception mainly due to the directivity of the receiving antenna. Moreover for indoor reception at least 70% of an SFN coverage area can be achieved with a transmitter separation of up to 60 km depending on the radiated power and the transmitter antenna height.

Broadband Quasi-Yagi Antenna with a Ring-type Balun for Indoor DTV Reception (링형 밸런을 이용한 실내 DTV 수신용 광대역 준-야기 안테나)

  • Lee, Jong-Ig;Yeo, Junho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.5
    • /
    • pp.906-912
    • /
    • 2017
  • In this paper, we studied a design method for a broadband 3-element quasi-Yagi antenna (QYA) for indoor digital television (DTV) reception. The proposed QYA employs a novel balun between a microstrip (MS) line and a coplanar strip (CPS) line feeding the driver dipole. The proposed balun is constructed by connecting the end of MS line to CPS line through a shorting pin, and the CPS and ground reflector are connected through a circular ring-type conductor. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV. The antenna fabricated on an FR4 substrate with a size of $270mm{\times}150mm$ showed a good performance such as a frequency band of 470-820 MHz for a voltage standing wave ratio < 2, a gain > 4.0 dBi, and a front-to-back ratio > 8.4 dB over the DTV frequency band.

Analysis on DTV Indoor Reception Environments (디지털 TV 실내수신 환경 분석)

  • Suh, Young-Woo;You, Ho-Jin;Park, Min-Ho;Park, Joon-Sung;Kim, Gyu-Young;Seo, Jong-Soo
    • Journal of Broadcast Engineering
    • /
    • v.13 no.5
    • /
    • pp.636-650
    • /
    • 2008
  • DTV has a great advantage as compared to Analog TV in picture quality under low reception field strength. Various high quality tuners have been developed to result in much smaller Noise Figure of the receivers and many trials for receiving DTV signal through indoor antenna. In this paper, results of intensive field tests on the indoor reception of DTV are presented. Tests were carried out around Seoul-Gyeonggi Metropolitan area. Commercial directional and omni-directional antennas and 5th generation receiver were used for reception availability tests. The effects of heights, locations, and types of the house as well as the distance to the transmitter on the reception performances are analyzed. Our test results will be applied to improve the indoor reception environment of DTV.