• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.196-213
• /
• 2001

A split beam ultrasonic transducer operating at a frequency of 70 kHz to use in the fish sizing echo sounder was developed and the acoustic radiation characteristics were experimentally analyzed. The amplitude shading method utilizing the properties of the Chebyshev polynomials was used to obtain side lobe levels below -20 dB and to optimize the relationship between main beam width and side lobe level of the transducer, and the amplitude shading coefficient to each of the elements was achieved by changing the amplitude contribution of elements with 4 weighting transformers embodied in the planar array transducer assembly. The planar array split beam transducer assembly was composed of 36 piezoelectric ceramics (NEPEC N-21, Tokin) of rod type of 10 mm in diameter and 18.7 mm in length of 70 kHz arranged in the rectangular configuration, and the 4 electrical inputs were supplied to the beamformer. A series of impedance measurements were conducted to check the uniformity of the individual quadrants, and also in the configurations of reception and transmission, resonant frequency, and the transmitting and receiving characteristics were measured in the water tank and analyzed, respectively. The results obtained are summarized as follows : 1. Average resonant and antiresonant frequencies of electrical impedance for four quadrants of the split beam transducer in water were 69.8 kHz and 83.0 kHz, respectively. Average electrical impedance for each individual transducer quadrant was 49.2$\Omega$ at resonant frequency and 704.7$\Omega$ at antiresonant frequency. 2. The resonance peak in the transmitting voltage response (TVR) for four quadrants of the split beam transducer was observed all at 70.0 kHz and the value of TVR was all about 165.5 dB re 1 $\mu$Pa/V at 1 m at 70.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The resonance peak in the receiving sensitivity (SRT) for four combined quadrants (quad LU+LL, quad RU+RL, quad LU+RU, quad LL+RL) of the split beam transducer was observed all at 75.0 kHz and the value of SRT was all about -177.7 dB re 1 V/$\mu$Pa at 75.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The sum beam transmitting voltage response and receiving senstivity was 175.0 dB re 1$\mu$Pa/V at 1 m at 75.0 kHz with bandwidth of 10.0 kHz, respectively. 3. The sum beam of split beam transducer was approximately circular with a half beam angle of $9.0^\circ$ at -3 dB points all in both axis of the horizontal plane and the vertical plane. The first measured side lobe levels for the sum beam of split beam transducer were -19.7 dB at $22^\circ$ and -19.4 dB at $-26^\circ$ in the horizontal plane, respectively and -20.1 dB at $22^\circ$ and -22.0 dB at $-26^\circ$ in the vertical plane, respectively. 4. The developed split beam transducer was tested to estimate the angular position of the target in the beam through split beam phase measurements, and the beam pattern loss for target strength corrections was measured and analyzed.

• Radiation Oncology Journal
• /
• v.19 no.3
• /
• pp.275-286
• /
• 2001

Purpose : To setup procedures of quality assurance (OA) for implementing intensity modulated radiation therapy (IMRT) clinically, report OA procedures peformed for one patient with prostate cancer. Materials and methods : $P^3IMRT$ (ADAC) and linear accelerator (Siemens) with multileaf collimator are used to implement IMRT. At first, the positional accuracy, reproducibility of MLC, and leaf transmission factor were evaluated. RTP commissioning was peformed again to consider small field effect. After RTP recommissioning, a test plan of a C-shaped PTV was made using 9 intensity modulated beams, and the calculated isocenter dose was compared with the measured one in solid water phantom. As a patient-specific IMRT QA, one patient with prostate cancer was planned using 6 beams of total 74 segmented fields. The same beams were used to recalculate dose in a solid water phantom. Dose of these beams were measured with a 0.015 cc micro-ionization chamber, a diode detector, films, and an array detector and compared with calculated one. Results : The positioning accuracy of MLC was about 1 mm, and the reproducibility was around 0.5 mm. For leaf transmission factor for 10 MV photon beams, interleaf leakage was measured $1.9\%$ and midleaf leakage $0.9\%$ relative to $10\times\;cm^2$ open filed. Penumbra measured with film, diode detector, microionization chamber, and conventional 0.125 cc chamber showed that $80\~20\%$ penumbra width measured with a 0.125 cc chamber was 2 mm larger than that of film, which means a 0.125 cc ionization chamber was unacceptable for measuring small field such like 0.5 cm beamlet. After RTP recommissioning, the discrepancy between the measured and calculated dose profile for a small field of $1\times1\;cm^2$ size was less than $2\%$. The isocenter dose of the test plan of C-shaped PTV was measured two times with micro-ionization chamber in solid phantom showed that the errors upto $12\%$ for individual beam, but total dose delivered were agreed with the calculated within $2\%$. The transverse dose distribution measured with EC-L film was agreed with the calculated one in general. The isocenter dose for the patient measured in solid phantom was agreed within $1.5\%$. On-axis dose profiles of each individual beam at the position of the central leaf measured with film and array detector were found that at out-of-the-field region, the calculated dose underestimates about $2\%$, at inside-the-field the measured one was agreed within $3\%$, except some position. Conclusion : It is necessary more tight quality control of MLC for IMRT relative to conventional large field treatment and to develop QA procedures to check intensity pattern more efficiently. At the conclusion, we did setup an appropriate QA procedures for IMRT by a series of verifications including the measurement of absolute dose at the isocenter with a micro-ionization chamber, film dosimetry for verifying intensity pattern, and another measurement with an array detector for comparing off-axis dose profile.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.11
• /
• pp.281-290
• /
• 2020

With the spread of smartphones, services that want to use personalized data are increasing. In particular, healthcare-related services deal with a variety of data, and data visualization techniques are used to effectively show this. As data visualization techniques are used, interactions in visualization are also naturally emphasized. In the PC environment, since the interaction for data visualization is performed with a mouse, various filtering for data is provided. On the other hand, in the case of interaction in a mobile environment, the screen size is small and it is difficult to recognize whether or not the interaction is possible, so that only limited visualization provided by the app can be provided through a button touch method. In order to overcome the limitation of interaction in such a mobile environment, we intend to enable data visualization interactions through conversations with chatbots so that users can check individual data through various visualizations. To do this, it is necessary to convert the user's query into a query and retrieve the result data through the converted query in the database that is storing data periodically. There are many studies currently being done to convert natural language into queries, but research on converting user queries into queries based on visualization has not been done yet. Therefore, in this paper, we will focus on query generation in a situation where a data visualization technique has been determined in advance. Supported interactions are filtering on task x-axis values and comparison between two groups. The test scenario utilized data on the number of steps, and filtering for the x-axis period was shown as a bar graph, and a comparison between the two groups was shown as a line graph. In order to develop a natural language processing model that can receive requested information through visualization, about 15,800 training data were collected through a survey of 1,000 people. As a result of algorithm development and performance evaluation, about 89% accuracy in classification model and 99% accuracy in query generation model was obtained.

• Archives of design research
• /
• v.17 no.2
• /
• pp.425-436
• /
• 2004

A new design field called eDesign appears as if eBiz is an online related business in which an industrialized design creates the individual value added facing a digital revolution. The field of eDesign requires a special design process and management methodology regardless of the fact that human sensitivity will be satisfied through a dehumanized computer technique. However, it is the reality of eDesign that has been dependent upon a simple process or project management tool of general design. In this study, we develop an eDesign platform based on an eDesign process and template mainly focused on eBusiness in order to overcome the wrong situation. The template is a kind of document that has a standardization form. We aim to establish a general process through various case projects, store information using a necessary template, and use for the way of visual communication. We propose a standard of eDesign platform that can be widely applied to the field of design, medium and small enterprises focused on IT businesses or design-team through this project performed as an educational-industrial study. It makes it possible to get a detailed process methodology, which can be applied to many small design related companies that don't have their own process yet, and will be a scale for comparing their own process in which the company has a process of opened standard eDesign with it. In addition, it makes possible a systematic control of the own projects within and outside the firm, accumulating information for the firm through the database, and easy communication. Furthermore, it can be applied to check the process of the project as a checklist, and then it will reduce trial and error repeated for every project that has been done.

• Journal of Environmental Impact Assessment
• /
• v.25 no.5
• /
• pp.319-332
• /
• 2016

Alien turtles belonging to Genus Trachemys have been designated as Invasive Alien Species since 2001 and their import has been banned in Korea. However, current status of import and distribution of the other alien turtles have not been reported. In this study, we aimed to investigate the taxa of alien turtles introduced into Korea, to assess their potential risks to the natural ecosystems and to suggest the future management directions of them in Korea. We identified 73 species of alien turtles belonging to 9 families. Since 2008, more than 6,000 kg of turtles have been imported annually and widely distributed through the pet shops, traditional markets and individual transactions. From the survey of natural habitats, we found that 8 species belonging to 3 families including Chrysemys picta, Pseudemys concinna, P. nelsoni, P. peninsularis, P. rubriventris, Mauremys sinensis, Macrochelys temminckii and Trachemys scripta have inhabited in 12 study sites. Out of 73 alien turtles, the potential adverse impacts of 13 species to ecosystems are serious when we considered status of designation of invasive alien species in other countries. For the management of alien turtles, it is required to register alien turtles in the import list and share general information such as import purpose, distribution and management condition among relevant authorities. The breeders and distributors must be obliged to identify turtles and to record management. The government must check transfer and migration of turtles periodically to prevent their introduction and spread into natural environments. The change of alien turtle populations in natural habitats should be monitored and their management plan should be developed to control the alien turtles in areas where the impacts are significant.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.5
• /
• pp.78-90
• /
• 2013

The purpose of this study was to analyze the types and characteristics of public complaints caused by the landscape architecture projects in the case of apartment complex. Furthermore, its purpose was also to propose as the basis data for the minimization of complaints in the course of future landscape architecture projects. To analyze and categorize the apartment complex civil complaints, we collected basic and case study data from LH Corporation, SH Corporation and GICO from 2009 to 2012. We also categorized 672 landscape complaints to 73 categories and conducted a survey from residents and landscape architecture. This Survey is to use IPA can collect character(public-private), handling of civil affair(easy-hard) and analyze typical characters and difference of civil complaint awareness between landscape architecture and residents. First, we were categorized 73 civil complaints by type in 5 categories such as park, green space and street trees, pedestrian road, facilities, and others. Second, the most common landscape complaints appear in green spaces, street trees, facilities, pedestrian roads and park orders. Third, results of the analysis conducted for each item which are publicity and measures the ease. 'Facilities', 'landscape and greenery', 'pedestrian road' and others were commonly appears from residents and professional awareness of the complaints. However, complaints of park appear different awareness between landscape architecture and residents. Fourth, 35 from 73 civil complaints(47.9%) are having high publicity and easy to measure, 25 civil complaints(34.2%) has analyzed to individual and difficult to measure so about the these complaints need to check from the design step so that it is necessary to minimize the problem of additional expense by civil complaints burden and decrease the confidence of residence problem were considered.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.107-107
• /
• 2017

Sweet corns are enjoyed worldwide as processed products and fresh ears. Types of sweet corn are based on the gene(s) involved. The oldest sweet corn type has a gene called "sugary (su)". Sugary-based sweet corn was typically named "sweet corn". With its relatively short shelf life and the discovery of a complementary gene, "sugary enhanced (se)", the sweet corn (su only) was rapidly replaced with another type of sweet corns, sugary enhanced sweet corn, which has recessive homozygous su/su, se/se genotype. With the incorporation of se/se genotype into existing su/su genotype, sugary enhanced sweet corn has better shelf life and increased sweetness while maintaining its creamy texture due to high level of water soluble polysaccharide, phytoglycogen. Super sweet corn as the name implies has higher level of sweetness and better shelf life than sugary enhanced sweet corn due to "shrunken2 (sh2)" gene although there's no creamy texture of su-based sweet corns. Distinction between sh2/sh2 and su/su genotypes in seeds is phenotypically possible. The Involvement of se/se genotype under su/su genotype, however, is visually impossible. The genotype sh2/sh2 is also phenotypically epistatic to su/su genotype when both genotypes are present in an individual, meaning the seed shape for double recessive sh2/sh2 su/su genotype is much the same as sh2/sh2 +/+ genotype. Hence, identifying the double and triple recessive homozygous genotypes from su, se and sh2 genes involves a testcross to single recessive genotype, chemical analysis or DNA-based marker development. For these reasons, sweetcorn breeders were hastened to put them together into one cultivar. This, however, appears to be no longer the case. Sweet corn companies began to sell their sweet corn hybrids with different combinations of abovementioned three genes under a few different trademarks or genetic codes, i.g. Sweet $Breed^{TM}$, Sweet $Gene^{TM}$, Synergistic corn, Augmented Supersweet corn. A total of 49 commercial sweet corn F1 hybrids with B73 as a check were genotyped using DNA-based markers. The genotype of field corn inbred B73 was +/+ +/+ +/+ for su, se and sh2 as expected. All twelve sugary enhanced sweet corn hybrids had the genotype of su/su se/se +/+. Of sixteen synergistic hybrids, thirteen cultivars had su/su se/se sh2/+ genotype while the genotype of two hybrids and the remaining one hybrid was su/su se/+ sh2/+, and su/su +/+ sh2/+, respectively. The synergistic hybrids all were recessive homozygous for su gene and heterozygous for sh2 gene. Among the fifteen augmented supersweet hybrids, only one hybrid was triple recessive homozygous (su/su se/se sh2/sh2). All the other hybrids had su/su se/+ sh2/sh2 for one hybrid, su/su +/+ sh2/sh2 for three hybrids, su/+ se/se sh2/sh2 for three hybrids, su/+ se/+ sh2/sh2 for four hybrids, and su/+ +/+ sh2/sh2 for three hybrids, respectively. What was believed to be a classic super sweet corn hybrids also had various genotypic combination. There were only two hybrids that turned out to be single recessive sh2 homozygous (+/+ +/+ sh2/sh2) while all the other five hybrids could be classified as one of augmented supersweet genotypes. Implication of the results for extension service and sweet corn breeding will be discussed.

• Journal of Korean Library and Information Science Society
• /
• v.11
• /
• pp.69-99
• /
• 1984

A dramatic development in the new technology of copying materials has presented us with massive problems on reconciling the conflicts between copyright owners and potential users of copyrighted materials. The adaptation to this changing condition led some countries to revise their copyright laws such as in the U. S. in 1976 and in Korea in 1984 for merging with the international or universal copyright conventions in the future. Copyright defined as exclusive rights given to copyright owners aims to secure a fair return for an author's creative labor and to stimulate artistic creativity for the general public good. The exclusive rights on copyrightable matters, generally for reproduction, preparation of derivative works, public distribution, public performance, and public display, are limited by fair use for scholarship and criticism and by library reproduction for its preservation and interlibrary loan. These limitations on the exclusive rights are concerned with all aspects of library services and cause a great burden on librarian's daily duty to provide balance between the rights of creators and the needs of library patrons. The fair use as one of the limitations on it has been coupled with enormous growth of a new technology and extended from xerography to online database systems. The implementation of the fair use and library reprography in Korean law to the local practices is examined on the basis of the new American copyright act of 1976. Under the draft revision of Korean law, librarians will face many potential problems as summarized below. 1. Because the new provision of 'life time plus 50 years' will tie up substantial bodies of material longer than the old law, until that date librarians would need permissions from the owners and should pay attention to the author's death date. 2. Because the copyright can be sold, distributed, given to the heirs, donated, as a whole or a part, librarians should chase down the heirs and other second owners. In case of a derivative work, this is a real problem. 3. Since a work has its protection from the moment of its creation, the coverage of copyrightable matter would be extended to the published or the unpublished works and librarian's work load would be heavier. Without copyright registration, no one can be certain that a work is in the public domain. Therefore, librarians will need to check with an authority. 4. For implementation of limitations on exclusive rights, fair use and library reproduction for interlibrary loan, there can be no substantial aggregate use and there can be no systematic distribution of multicopies. Therefore, librarians should not substitute reproductions for subscriptions or purchases. 5. For the interlibrary loan by photocopying, librarians should understand the procedure of royalty payment. 6. Compulsory licenses should be understood by librarians. 7. Because the draft revision of Korean law is a reciprocal treaty, librarians should take care of other countries' copyright law to protect foreign authors from Korean law. In order to solve the above problems, some suggestions are presented below. 1. That copyright clearinghouse or central agency as a centralized royalty payment mechanism be established. 2. That the Korean Library Association establish a committee on copyright. 3. That the Korean Library Association propose guidelines for each occasion, e.g. for interlibrary loan, books and periodicals and music, etc. 4. That the Korean government establish a copyright office or an official organization for copyright control other than the copyright committee already organized by the government. 5. That the Korean Library Association establish educational programs on copyright for librarians through seminars or articles written in its magazines. 6. That individual libraries provide librarian's copyright kits. 7. That school libraries distribute subject bibliographies on copyright law to teachers. However, librarians should keep in mind that limitations on exclusive rights are not for an exemption from library reprography but as a convenient access to library resources.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2015

The new medical device technologies for bio-signal information and medical information which developed in various forms have been increasing. Information gathering techniques and the increasing of the bio-signal information device are being used as the main information of the medical service in everyday life. Hence, there is increasing in utilization of the various bio-signals, but it has a problem that does not account for security reasons. Furthermore, the medical image information and bio-signal of the patient in medical field is generated by the individual device, that make the situation cannot be managed and integrated. In order to solve that problem, in this paper we integrated the QR code signal associated with the medial image information including the finding of the doctor and the bio-signal information. bio-signal. System implementation environment for medical imaging devices and bio-signal acquisition was configured through bio-signal measurement, smart device and PC. For the ROI extraction of bio-signal and the receiving of image information that transfer from the medical equipment or bio-signal measurement, .NET Framework was used to operate the QR server module on Window Server 2008 operating system. The main function of the QR server module is to parse the DICOM file generated from the medical imaging device and extract the identified ROI information to store and manage in the database. Additionally, EMR, patient health information such as OCS, extracted ROI information needed for basic information and emergency situation is managed by QR code. QR code and ROI management and the bio-signal information file also store and manage depending on the size of receiving the bio-singnal information case with a PID (patient identification) to be used by the bio-signal device. If the receiving of information is not less than the maximum size to be converted into a QR code, the QR code and the URL information can access the bio-signal information through the server. Likewise, .Net Framework is installed to provide the information in the form of the QR code, so the client can check and find the relevant information through PC and android-based smart device. Finally, the existing medical imaging information, bio-signal information and the health information of the patient are integrated over the result of executing the application service in order to provide a medical information service which is suitable in medical field.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.202-209
• /
• 2014

RNA interference (RNAi) is the method which controls phenotypes of gene in live cells. Chitinase is the enzyme helping digestion and absorption of old cuticles during the ecdysis of insects. In order to investigate molting-inhibition effect with the chitinase related gene in Spodoptera litura, RNA was extracted from the $5^{th}$ instars. cDNA was synthesized and then we obtained about 700 bp size chitinase. After PCR products were cloned into a pGEM T-easy vector, colonies were picked. DNA was extracted from the colony cultures. EcoR I enzyme was used to check whether PCR products were inserted or not. And then we confirmed vector band of about 3 kb and insert band of about 700 bp. To synthesize the dsRNA, each DNA was cut with Spe I and Nco I enzymes (Circular DNA became lineared DNA). After synthesis of dsRNA, approximately 5 ul dsRNA was injected into the $3^{rd}$ abdominal segment of S. litura $4^{th}$ larvae. The concentration of dsRNA was about $10{\mu}g/{\mu}l$. We confirmed larval-larval molting : there were phenotypically abnormal individuals - for instance malformation, molting inhibition and change of integument color. Pupaadult molting : there were phenotypically abnormal individuals - for instance molting inhibition, change of wings and malformation. Also we could investigate the pupation, emergence and variation about noninjection, treated with DW and dsRNA. Each pupation was non-injection 83.3%, DW 78.3% and dsRNA 66.7%. Each emergence was non-injection 90.0%, DW 72.3% and dsRNA 65.0%. So we considered that chitinase dsRNA induced molting inhibition effect. But each variation was non-injection 8.9%, DW 2.9% and dsRNA 19.2%. Therefore dsRNA group showed the highest variation value. When 18 hours after injecting dsRNA, we could obtain abnormal individual.