• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.1-5
• /
• 2018

본 연구에서는 InGaN/GaN multi quantum well (MQW)에서 Indium (In) 도핑효과에 따른 광전기화학적 특성을 관찰하였다. 기판으로는 Sapphire을 사용하였고, 각 Quantum well (QW)을 구성하고 있는 InGaN의 조성을 다르게 하였다. 투과도 측정 결과 일정한 In 조성을 가진 InGaN/GaN MQW에 비해 각 QW의 In 조성을 다르게 한 InGaN/GaN MQW에서 흡수도가 향상되는 것을 확인할 수 있었다. 이는 각각 다른 In 조성을 가진 InGaN 층이 더 넓은 영역의 스펙트럼 에너지를 가지는 빛을 흡수하기 때문인 것으로 생각된다. 광학적 특성을 평가하기 위해 진행한 상온 photoluminescence (PL) 실험을 진행한 결과, 역시 다양한 In 조성을 가진 InGaN/GaN MQW이 더 넓은 파장에서 발광이 나타나는 것을 확인할 수 있었다. 이들 샘플에 대한 광전기화학적 특성평가를 통하여, gradation In 조성을 가지고 있는 InGaN/GaN MQW이 일정한 In 조성을 가지는 InGaN/GaN MQW에 비해 광전기화학적 물분해 능력이 월등히 향상됨을 확인하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.177-179
• /
• 2009

In order to investigate the possible application of ZnO films as a transparent conducting oxide (TCO) electrode, ZnO:Al films were prepared by RF magnetron sputtering method. The effects of surface treatment and doping concentration on the structural and electrical properties of ZnO films were mainly studied experimentally. Five-inch PDP cells using either a ZnO:Al or indium tin oxide (ITO) electrode were also fabricated separately under the same manufacturing conditions. The luminous properties of both the transparent conducting oxide electrode were measured and compared with each other. By doping the ZnO target with 2 wt% of Al2O3, the film deposited at a chemical surface treatment resulted in the minimum resistivity of 8.5 _ 10_4 U-cm and a transmittance of 91.7%. And DBD surface treatment resulted in the minimum resistivity of 8.5 _ 10_4 U-cm and a transmittance of 91.7%. Although the luminance and luminous efficiency of the transparent conducting oxide electrode using ZnO:AI are lower than those of the cell with the ITO electrode by about 10%, these values are sufficient enough to be considered for the normal operation of TCO.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.97-102
• /
• 2002

Recently, the phosphorescent organic light-emitting devices (OLEDs) have been extensively studied for their high internal quantum efficiency. In this study, we synthesised several phosphorescent metal complexes, and certified their composition using NMR. We also investigated the characteristics of the phosphorescent OLEDs with the green emitting phosphor, $Ir(ppy)_{3}$. The devices with a structure of indium-tin-oxide(ITO)/N,N'-diphenyl-N,N'-(3-methylphenyI}-1,1'-biphenyl-4,4'-diamine (TPD)/metal complex doped in host materials/2,9-dimethyl-4,7-diphenyl-l,10-phenanthroline(BCP)/tris (8-hydroxyquinolinato) Aluminum($Alq_{3}$)/Li:Al/Al was fabricated, and its electrical and optical characteristics were studied. By changing the doping concentration of tris(2-phenylpyridine)iridium ($Ir(ppy)_{3}$), we fabricated several devices and investigated their characteristics.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.729-734
• /
• 2002

본 연구에서 PSS로 도핑된 EB와 LEB 형태의 폴리아닐린 필름을 ITO전극위에 m-cresol, chloroform 혼합용액을 도포시켜 제조하였다. UV 실험결과로부터 m-cresol에 의한 이차 도핑 효과를 확인 할 수 있었으며, m-cresol의 양이 증가할수록 폴리아닐린 필름의 전도도는 증가하였다. 이차도핑에 의한 전도도 향상은 제조된 폴리아닐린과 m-cresol의 상호작용에 의한 것으로 판단된다. 폴리아닐린의 전기화학적 실험결과 LEB로 제작된 폴리아닐린 전극의 산화 환원 피크 전류는 EB로 제작된 폴리아닐린 전극보다 더 크고 가역적인 것을 CV를 통해 구할 수 있었다. 또한 전하전달 저항은 m-cresol의 양이 증가할수록 감소하였으며, LEB/PSS 전극의 전하 전달 저항 값이 EB/PSS 전극보다 작았다. 이것은 CV에서 얻은 경향과 일치하였다. 제조된 폴리아닐린 전극 모두 이중층 용량과 용액저항은 일정하였으며, 용액저항은 주파수에 무관한 인자임을 알 수 있었다. 또한 PSS로 도핑된 폴리아닐린은 가상적인 n형 전도성 고분자의 특성을 나타내었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.65-65
• /
• 2011

Single-well carbon nanotubes (SWNT) have been proposed as a promising candidate for various applications owing to their excellent properties. In particular, their fascinating electrical and mechanical properties could provide a new area for the development of advanced engineering materials. A transparent conductive thin film (TCF) has increased for applications such as liquid crystal displays, touch panels, and flexible displays. Indium tin oxide (ITO) thin films, which have been traditionally used as the TCFs, have a serious obstacle in TCFs applications. SWNTs are the most appropriate materials for conductive films for displays due to their excellent high mechanical strength and electrical conductivity. But, a bundle of CNTs has different electrical properties than their individual counterparts. In this work, the fabrication by the spraying process of transparent SWNT films and reduction of its sheet resistance on PET substrates is researched. Arc-discharge SWNTs were dispersed in deionized water by adding sodum dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWNT was spray-coated on PET substrate and dried on a hotplate at $100^{\circ}C$. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then treated with ionic doping treatment, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. Results, we show that 97 ${\Omega}$/> sheet resistance can be achieved with 81% transmittance at the wavelength of 550 nm. The changes in electrical and optical conductivity of SWNT film before and after ionic doping treatments were discussed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.111.1-111.1
• /
• 2012

Interest in flexible transparent conducting films (TCFs) has been growing recently mainly due to the demand for electrodes incorporated in flexible or wearable displays in the future. Indium tin oxide (ITO) thin films, which have been traditionally used as the TCFs, have a serious obstacle in TCFs applications. SWNTs are the most appropriate materials for conductive films for displays due to their excellent high mechanical strength and electrical conductivity. In this work, the fabrication by the spraying process of transparent SWNT films and reduction of its sheet resistance on PET substrates is researched Arc-discharge SWNTs were dispersed in deionized water by adding sodium dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWNT was spray-coated on PET substrate and dried on a hotplate. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then was doped with Au-ionic doping treatment, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. This was confirmed and discussed on the XPS and UPS studies. We show that 87 ${\Omega}/{\Box}$ sheet resistances with 81% transmittance at the wavelength of 550nm. The changes in electrical and optical conductivity of SWNT film before and after Au-ionic doping treatments were discussed. The effect of Au-ion treatment on the electronic structure change of SWNT films was investigated by Raman and XPS.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.434-434
• /
• 2012

Despite recent efforts for fabricating flexible transparent conducting films (TCFs) with low resistance and high transmittance, several obstacles to meet the requirement of flexible displays still remain. Indium tin oxide (ITO) thin films, which have been traditionally used as the TCFs, have a serious obstacle in TCFs applications. SWNTs are the most appropriate materials for conductive films for displays due to their excellent high mechanical strength and electrical conductivity. Recently, it has been demonstrated that acid treatment is an efficient method for surfactant removal. However, the treatment has been reported to destroy most SWNT. In this work, the fabrication by the spraying process of transparent SWNT films and reduction of its sheet resistance by Au-ionic doping treatment on PET substrates is researched. Arc-discharge SWNTs were dispersed in deionized water by adding sodium dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWNT was spray-coated on PET substrate and dried on a hotplate. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then was doped with Au-ionic doping treatment, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. This was confirmed and discussed on the XPS and UPS studies. We show that 87 ${\Omega}/{\Box}$ sheet resistances with 81% transmittance at the wavelength of 550 nm. The changes in electrical and optical conductivity of SWNT film before and after Au-ionic doping treatments were discussed. The effects of hole transport interface layer using Au-ionic doping SWNT on the performance of organic solar cells were investigated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.151.2-151.2
• /
• 2015

본 연구에서는 indium-tin-oxide(ITO)/1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile(HAT-CN)/N,N'-di(naphthalene-lyl)-N,N'-diphenyl-benzidine(NPB)/4,4'-Bis(N-carbazolyl)-1,1'-biphenyl(CBP)/2,2',2"-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole)TPBi/tris-(8-hydroxyquinoline) aluminum($Alq_3$)/LiF/Al 구조를 가진 유기 발광 다이오드 소자의 발광층에 $Ir(ppy)_3$(2% wt)을 도핑하여 소자의 특성 변화를 살펴보았다. $Ir(ppy)_3$의 두께는 5nm이고 도핑 위치는 정공 수송층과 발광층 계면의 0nm에서부터 25nm까지 5nm간격으로 도핑을 하였다. 실험 결과 소자의 효율은 도핑 위치가 정공 수송층에서 25nm떨어진 위치일 때 가장 높았고, 10nm일 때 가장 낮았다. 이는 도핑 부분의 위치가 정공 차단층에 가까워질수록 정공과 전자의 균형이 좋아지는 것이 소자 성능을 향상시키는 원인으로 추측된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.185.2-185.2
• /
• 2015

Tin Oxide (SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. In addition, it would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. There have been concentrated on the improvement of optical properties, such as conductivity and transparency, by doping Indium Oxide and Gallium Oxide. Recently, with development of fabrication techniques, high-qulaity SnO2 epitaxial thin films have been studied and received much attention to produce the electronic devices such as sensor and light-emitting diode. In this study, powder sputtering method was employed to deposit epitaxial thin films on sapphire (0001) substrates. A commercial SnO2 powder was sputtered. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using XRD, SEM, AFM, and Raman spectroscopy measurements. The details of physical properties of epitaxial SnO2 thin films will be presented.

• 대한전기학회논문지
• /
• 제39권2호
• /
• pp.183-191
• /
• 1990

Polycrystalline CdS film have been prepared by coating a slurry constiting of CdS, CdCl2, various amount of InCl3 and propylene glycol on glass substrate and by sintering in a nitrogen atmosphere, and their sintering behaviors, electrical properties and optical properties have been investigated. As the amount of InCl3 increases, the enhancing effect of CdCl2 on sistering decreses resulting in a sharp decrease in optical transmittance and an increase in electrical resistivity. The carrier concentration is almost independent of InCl3 added due to the occurrence of chlorine doping and to the compensating effect of indium dopant. Microstructure an optical properties of CdS film, which contain CdCl2 and InCl3 before sintering, can be improved by sintering in a sealed boat.