• 제목/요약/키워드: indirect method

검색결과 1,751건 처리시간 0.03초

A Carrier-Based Pulse Width Modulation Method for Indirect Matrix Converters

  • Nguyen, Dinh-Tuyen;Lee, Hong-Hee;Chun, Tae-Won
    • Journal of Power Electronics
    • /
    • 제12권3호
    • /
    • pp.448-457
    • /
    • 2012
  • This paper proposes a carrier-based pulse width modulation (PWM) method to control an indirect matrix converter (IMC) by analyzing the relationship between the space vector PWM (SVPWM) and the carrier-based PWM. The complexity of the SVPWM method for an IMC can be reduced by using an equivalent carrier-based PWM method. The advantage of the proposed algorithm is its ability use only one symmetrical triangular carrier signal to generate the gate signals for all of the power switches in both the rectifier and inverter stages as compared to the conventional method where the carrier signal used in the rectifier stage is different from that of the inverter stage. In addition, by using a suitable offset voltage component in the modulation signals, the output voltage magnitude reaches 0.866 of the input voltage magnitude. Simulation and experimental results are provided in order to validate the proposed method.

약쑥엑스제 뜸 방식에 관한 연구 (A Study on the Moxa-extract Moxibustion Method)

  • 조봉관;이윤호;윤동업
    • Journal of Acupuncture Research
    • /
    • 제23권4호
    • /
    • pp.1-14
    • /
    • 2006
  • Objectives : We implemented the Moxa-Extract Moxibustion Method in order to improve the conventional moxibustion therapy. This method is aimed to eliminate burning wounds and smoke, which are the defects of conventional moxibustion therapy. And we performed to verify the efficiency by comparing the Moxa-Extract Moxibustion Method with the conventional Indirect Moxibustion Method. We measured the body heat and the lasting time of blood circulation improveent using thermography. We implemented the Moxa-Extract Moxibustion Method in order to improve the conventional moxibustion therapy. This method is aimed to eliminate burning wounds and smoke, which are the defects of conventional moxibustion therapy. And we performed to verify the efficiency by comparing the Moxa-Extract Moxibustion Method with the conventional Indirect Moxibustion Method. We measured the body heat and the lasting time of blood circulation improvement using thermography. Methods : The moxibustion therapy has two kinds of effects: The formers are pharmacological effects of the Moxa's vasodilators and antioxidants. The latters are thermal effects which cause improvement of the blood circulation. To remove the demerits without omission of above therapeutic effects, we extracted the vasodilators and antioxidant compounds from the Moxa-CH2Cl2 fraction Moxa-EtOA and composed the moxibustion kit with (Ba0.8 Sr0.2)0.996 Y0.004 TiO2 + 0.5WT SiO2% positive Temperature Coefficients Thermistor. The experimental demonstrations have been made by the stimulating the spot which is CV4(Kwan-Won), CV8(Shin-Guel), CV12(Jung-Wan) acupuncture points of the conception vessel meridian(CV). And stimulating time was one hour. We divided the subjects into 5 groups such as no stimulation group, conventional Indirect Moxibustion group, only Moxa-Extract stimulation group, only heat stimulation group, and Moxa-Extract Moxibustion group. In the different cases, we have measured the body heat in pre-stimulation, just after stimulation, 2 hours after, and 4 hours after. Results : he body heats of the group who were stimulated by the Moxa-Extract Moxibustion method were increased by over the $2^{\circ}C$. And the body heats of the group who were stimulated by the Indirect Moxibustion Method were increased by average the $1^{\circ}C$. We have evaluated that the Moxa-Extract Moxibustion Method is improvement on the Indirect Moxibustion Method by the increasing rate is 200% and increasing time is 150% with the body heat of the abdominal region. Conclusion : We have implemented the Moxa-Extract Moxibustion Method and evaluated the efficiency of the Moxa-Extract Moxibustion Method comparing with the Indirect Moxibustion Method.

  • PDF

플라스틱/종이 재질의 간접 증발 소자와 재생 증발 소자 성능 비교 (Performance Comparison between Indirect Evaporative Cooler and Regenerative Evaporative Cooler made of Plastic/Paper)

  • 김내현
    • 한국산학기술학회논문지
    • /
    • 제17권1호
    • /
    • pp.88-98
    • /
    • 2016
  • 여름철이 무더운 대한민국에서는 냉방에 많은 전력을 소비한다. 이 경우 간접증발냉각을 동시에 적용하면 전기 사용을 줄일 수 있다. 본 연구에서는 물 퍼짐성을 개선한 플라스틱/종이 재질의 간접 및 재생증발소자에 대해 일련의 실험을 수행하였다. ${\epsilon}-NTU$ 방식의 열 및 물질전달 해석 모델과 비교한 결과 모델의 예측치는 간접 및 재생증발소자의 간접증발효율, 냉각열량, 압력손실을 적절히 예측하였다. 모델 해석 결과 간접 및 재생증발소자 모두 건채널 입구온도와 상대습도가 증가하면 간접증발효율이 증가하였다. 또한 재생증발소자의 간접증발효율이 간접증발소자의 값보다 크게 나타났다.

Digital Radiography System에서 X선 광자 검출 방식에 따른 선량 및 화질 특성에 관한 연구 (A Study on Dose and Image Quality according to X-ray Photon Detection Method in Digital Radiography System)

  • 홍선숙;김호철
    • 전자공학회논문지
    • /
    • 제50권12호
    • /
    • pp.247-253
    • /
    • 2013
  • 본 연구의 목적은 Direct DR(Digital Radiography), Indirect DR, I.I(Image Intensifier) DR에서 X선 광자 검출 방식에 따른 선량측정 및 획득된 영상을 정량적이고 객관적인 측정을 통해 DR System을 비교 평가 하는 것이다. Rando phantom을 사용하여 입사표면선량을 측정하였으며, 측정된 입사표면선량 값을 통해 PCXMC 프로그램을 사용하여 유효선량과 방사선 조사로 인한 위험을 평가하였다. 21cm 아크릴 phantom을 사용하여 SNR(Signal to Noise Ratio), NPS(Noise Power Spectrum), CNR(Contrast to Noise Ratio)을 측정하였으며, 측정값은 통계학적 분석기법을 사용하여 유의성을 평가하였다. 입사표면선량, 주요장기선량, 유효선량 모두 direct DR이 가장 낮게 측정되었으며, direct DR 선량을 기준으로 I.I type DR은 약 1.3배, indirect DR은 약 2.4배 높은 선량 비율로 측정되었다. 방사선량에 따른 위험도 역시 동일한 비율로 측정되었다. SNR 측정 결과 direct DR측정값을 기준으로 I.I DR은 약 7.25배, indirect DR이 약 1.48배 낮은 비율로 측정되었다. CNR 측정 결과 direct DR 측정값을 기준으로 I.I DR은 약 1.16배 높고, indirect DR이 약 0.87배 낮은 비율로 측정되었다. 따라서 a-selenium 검출소자를 사용하여 X선 광자를 검출하는 방식인 direct DR은 적은 선량으로 우수한 화질의 영상을 구현함으로써 선량에 민감한 소아나 생식선이 포함된 검사 등에 유용할 것으로 사료된다. 또한 많은 진단 정보를 위한 영상 평가가 요구되는 경우에는 indirect DR이 유용할 것으로 판단된다.

직/간접 압출공정에 의해 제조된 AZ31Mg 합금의 미세조직 및 집합조직 변화 분석 (Analysis of microstructure and texture evolution in AZ31Mg alloy fabricated by direct/indirect extrusion process)

  • 김대하;유봉선;박성수;윤덕재;최시훈
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2008년도 추계학술대회 논문집
    • /
    • pp.38-41
    • /
    • 2008
  • To investigate the evolution of microstructure and texture in AZ31 Mg alloy, direct/indirect extrusion process was carried out at $300^{\circ}C$ with various extrusion speeds. The distribution of grain size depends on extrusion method and extrusion speed. More homogeneous grain site can be obtained at higher extrusion speed of indirect extrusion process. Extrusion speed does not affect significantly texture evolution during extrusion process regardless of extrusion method. ODF section is more useful to understand texture evolution during extrusion process compared with pole figure.

  • PDF

Indirect Immunoperoxidase 법을 이용한 조직내 뉴켓슬병 바이러스 항원동정 (Immunohistochemical identification of newcastle disease virus with indirect immunoperoxidase technique)

  • 노환국;서정향;김순복
    • 대한수의학회지
    • /
    • 제30권3호
    • /
    • pp.309-315
    • /
    • 1990
  • The present experiment was done to identify newcastle disease virus(NDV) antigens in frozen sections of various oragns from experimentally NDV-infected with indirect immunoperoxidase method. Section were incubated with rabbit anti-NDV polyclonal as first antibody, followed by incubation with goat anti-rabbit or protein A peroxidase conjugate. Positive reactions were often detected in the epithelium of trachea and in the lymphocyte of spleen at 24 hours after virus inoculation. the viral antigen was localized mainly in the cytoplasm of infected cells. The method approved to be highly specific for the identification of NDV and allowed a precise localization of the viral antigens in infected cells.

  • PDF

The discrete element method simulation and experimental study of determining the mode I stress-intensity factor

  • Shemirani, Alireza Bagher;Haeri, Hadi;Sarfarazi, Vahab;Akbarpour, Abbas;Babanouri, Nima
    • Structural Engineering and Mechanics
    • /
    • 제66권3호
    • /
    • pp.379-386
    • /
    • 2018
  • The present study addresses the direct and indirect methods of determining the mode-I fracture toughness of concrete using experimental tests and particle flow code. The direct method used is compaction tensile test and the indirect methods are notched Brazilian disc test, semi-circular bend specimen test, and hollow center cracked disc. The experiments were carried out to determine which indirect method yields the fracture toughness closer to the one obtained by the direct method. In the numerical analysis, the PFC model was first calibrated with respect to the data obtained from the Brazilian laboratory test. The crack paths observed in the simulated tests were in reasonable accordance with experimental results. The discrete element simulations demonstrated that the macro fractures in the models are caused by microscopic tensile breakages on large numbers of bonded particles. The mode-I fracture toughness in the direct tensile test was smaller than the indirect testing results. The fracture toughness obtained from the SCB test was closer to the direct test results. Hence, the semi-circular bend test is recommended as a proper experiment for determination of mode-I fracture toughness of concrete in the absence of direct tests.

고해상도 모의위성영상 제작에 관한 연구 (A Study on the Ceneration of Simulated High-Resolution Satellite Images)

  • 윤영보;조우석;박종현;이종훈
    • 대한원격탐사학회지
    • /
    • 제18권6호
    • /
    • pp.327-336
    • /
    • 2002
  • 다양한 분야에서 고해상도 위성영상의 활용도가 높아짐에 따라 많은 고해상도 인공위성이 발사되고 있으며 발사예정에 있다. 본 논문은 DEM과 항공사진영상을 이용하여 임의의 궤도정보와 자세정보를 가지는 인공위성에 대하여 모의위성영상을 제작할 수 있는 두 가지 방법을 제안하였다. 제작된 모의위성영상의 센서모델에서 자세는 변화가 없는 것으로 가정하였고, 투영중심의 위치는 위성의 진행방향에 따라 변화하는 모델을 사용하였다. 또한 자세와 위치에 변화를 준 모의위성영상을 제작하여 입체시 가능성을 실험하였으며, 제작된 모의위성영상의 정확도를 검증하기 위해 공간전방 교회를 이용하여 검증하였다.

고유수용성촉진법을 이용한 호흡운동이 경수 손상환자의 호흡기능에 미치는 영향 : 증례보고 (Using the PNF Approach to Improve Respiratory Function in Patients with Cervical Spinal Cord Injuries)

  • 송귀빈;김정빈
    • PNF and Movement
    • /
    • 제12권2호
    • /
    • pp.115-121
    • /
    • 2014
  • Purpose: The study aimed to examine the influence of PNF direct and indirect breathing treatments for patients with cervical spinal cord injuries who had breathing problems. Methods: For each cervical spinal cord patient, force vital capacity (FVC), peak expiratory flow, maximum phonation time (MPT), rib cage width, and VAS were measured pre-intervention and four weeks after post-intervention. The indirect method and the direct method were used for interventions. We treated patients with the indirect method using scapular anterior depression pattern, bilateral extensor pattern with rhythmic initiation, and a combination of isotonic. We treated patients with the direct method, applying pressure on the sternum and using rhythmic initiation (hold relax and stretch reflex) for the rib cage. Training occurred for 50 minutes a day and three days per week for four weeks. Results: FVC, MPT, peak expiratory flow, and rib cage width were increased and decreased at the VAS point for rolling after treatment. Conclusion: Patients with cervical spinal cord injuries who had breathing problems felt uncomfortable when they had conversations on a couch. We found that PNF direct and indirect treatments improved rib cage width and breathing functions of patients with cervical spinal cord injuries.

Impact of Direct Tax and Indirect Tax on Economic Growth in Vietnam

  • NGUYEN, Hieu Huu
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제6권4호
    • /
    • pp.129-137
    • /
    • 2019
  • Tax can be categorised into direct tax and indirect tax. This paper uses the ordinary least-squares regression method to study the impact of direct and indirect tax on economic growth in Vietnam in the period 2003-2017. Statistical data is collected from the Ministry of Finance of Vietnam. Theoretically, tax generates the state budget revenue and is a tool to regulate the economy. The results of statistical tests show that tax has a positive impact on Vietnam's economic growth. However, the effects of direct tax and indirect tax are different. The indirect tax has a positive influence and promote Vietnam's economic growth, while the impact of the direct tax is invisible. There has not been sufficient evidence to confirm that the indirect tax has a more positive impact than the direct tax. To promote economic growth, Vietnam needs to restructure its tax system towards: (1) Increasing the proportion of indirect tax, reducing the proportion of direct tax in the state budget revenue; (2) Expanding tax bases; (3) Reducing tax rates of corporate income tax and personal income tax; (4) Increasing tax rates of environmental protection tax, natural resources tax, value added tax and excise tax on some types of goods which harm health and environment.