• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.9-16
• /
• 1995

Undiluted neoasozin solution (6.5% a.i.), an arsenic fungicide, was sprayed on 169 cankers of apple trees from early March to September in 1987 twice at intervals of one week without scraping off the affected barks. Among the treated cankers, 79.9% ceased to grow within 1∼7 weeks, 13.0% showed partial development, and 7.1% grew continuously to girdle the branches. The partially developed cankers, however, could also be cured by an additional spray after slightly piercing at the edge of cankers to facilitate the penetration of the chemical. When the canker growth was blocked, cankers were encircled by cracks developed at the marginal area of the cankers. If the cracks developed once, very few cankers grew beyond them. The above results suggest that the crack development may be the consequence of the host defense activity to wall off the pathogen. In addition to the curative efficacy, the neoasozin solution inhibited sporulation of the pathogenic fungus almost completely. However, the pathogen survived for more than three months in some cankers that externally appeared to be cured, suggesting that an indirect mode of action of the chemical against apple Valsa canker seems to be still more persuasive than the direct fungicidal effect. In the final examination conducted in the mid April of the next year, 72.7% of the cankers were completely cured by the two successive neoasozin treatments. Moreover the cure rate became 83.1% if that of partially developed cankers which were also completely cured by an additional treatment was also taken into account. Since 1989 when this method was widely applied in apple orchards in Korea, apple Valsa canker has been effectively controlled to reach a tolerable level.

• Molecules and Cells
• /
• v.37 no.8
• /
• pp.613-619
• /
• 2014

The optic nerve often suffers regenerative failure after injury, leading to serious visual impairment such as glaucoma. The main inhibitory factors, including Nogo-A, oligodendrocyte myelin glycoprotein, and myelin-associated glycoprotein, exert their inhibitory effects on axonal growth through the same receptor, the Nogo-66 receptor (NgR). Oncomodulin (OM), a calcium-binding protein with a molecular weight of an ~12 kDa, which is secreted from activated macrophages, has been demonstrated to have high and specific affinity for retinal ganglion cells (RGC) and promote greater axonal regeneration than other known polypeptide growth factors. Protamine has been reported to effectively deliver small interference RNA (siRNA) into cells. Accordingly, a fusion protein of OM and truncated protamine (tp) may be used as a vehicle for the delivery of NgR siRNA into RGC for gene therapy. To test this hypothesis, we constructed OM and tp fusion protein (OM/tp) expression vectors. Using the indirect immunofluorescence labeling method, OM/tp fusion proteins were found to have a high affinity for RGC. The gel shift assay showed that the OM/tp fusion proteins retained the capacity to bind to DNA. Using OM/tp fusion proteins as a delivery tool, the siRNA of NgR was effectively transfected into cells and significantly down-regulated NgR expression levels. More importantly, OM/tp-NgR siRNA dramatically promoted axonal growth of RGC compared with the application of OM/tp recombinant protein or NgR siRNA alone in vitro. In addition, OM/tp-NgR siRNA highly elevated intracellular cyclic adenosine monophosphate (cAMP) levels and inhibited activation of the Ras homolog gene family, member A (RhoA). Taken together, our data demonstrated that the recombinant OM/tp fusion proteins retained the functions of both OM and tp, and that OM/tp-NgR siRNA might potentially be used for the treatment of optic nerve injury.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.536-541
• /
• 2009

Plasma-polymerized acrylic acid films were deposited on Si wafer and KBr pellet by remote plasma-enhanced chemical vapor deposition (PECVD). Effects of plasma power, reaction pressure, indirect plasma method on the growth rate, chemical structure, and chemical bonding state of the films were investigated. Chemical structure and chemical state of the films were characterized by Fourier transformed infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis and curve fitting technique. Growth rate of the film increased to a saturation value with plasma power of 100 W, but showed the maximum with reaction pressure at 300 mtorr. Whenever W/FM factor (applied energy per gas molecule) increased by increasing plasma power or lowering pressure, the fragmentation of acrylic acid molecules was promoted. From the XPS curve fitting analyses, we found that the intensity of carboxyl COO bonding peak decreased with W/FM factor, and the tendency of intensity change of carboxylic COO peak was contrary to those of ether C-O and carbonyl C=O peaks.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.223-229
• /
• 1984

An attempt to confirm the associations of some selected risk factors of HBV infection and measure their risks, a cross-sectional study with 1,209 urban office workers was carried out. For the study, a simple questionnaire which contained several questions on personal experience and behaviors on several known selected risk factors of HBV infection was applied to each subject, and the Hepatitis B virus surface antigen and its antibody were checked by RPHA and PHA method, respectively. Risk factors chosen for this study were experience of blood transfusion and personal contact variables, such as frequencies of eating-out, drinking after office hours, going to tea room, sharing cigarettes, etc. The results obtained were as follows: 1. The proportion of HBsAg positive was 10.6%, and total HVB infected including the Anti-HBs positive cases without vaccination was 44.2%. Both were higher in male than in female. 2. Frequent personal contact through glasses and dishes in eating-outs and drinkings turned out not to be a significant risk factor of Hepatitis B surface antigenecity. 3. Frequent visits to tea room was a significant risk factor of HBV infection which combined HBsAg positive cases and Anti-HBs cases who had not received HBV vaccination. The odds ratio was 1.56 4. Blood transfusion was not a significant risk factor of both HBsAg positive and total HBV infection. In summary, indirect oral contacts through eating-outs and drinkings was not significant risk factor in Korea at least between adults. Blood transfusion is no more major source of HBV infection in Korea probably because the adquate screening test of HBsAg for the blood donors is being made.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.3
• /
• pp.137-144
• /
• 2018

The purpose of this study is to measure the cost-benefit of a road construction project in Vietnam through international development cooperation, which includes private grants and Official Development Assistance(ODA). In developing countries, it is difficult and costly to use data on markets, the CVM(Contingent Valuation Method) to measure the WTP(Willingness-to-Pay) as the benefits of road construction are used. A total of 232 villagers in 16 villages of Lao Cai Province in Northern Vietnam have been surveyed. It is found that the Benefit-Cost Ratio(B/C) in all 3 models are found to be well over 1.0, ranging from 2.8 to 3.64 with the discount rate of 0.06. These BC ratios imply the road construction project in Lao Cai can be justified. Also, it is found that the shortened travel time is the most relevant factor for WTP among direct benefits and the enhanced academic achievement of the children is the most relevant factor among indirect benefits, due to easier and faster access to schools, which in turn increase the school attendance rate. The result of this study can be used to justify other similar projects in Vietnam, even though the benefits may have to be reassessed in other countries.

• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.37-41
• /
• 2004

Purpose : Raise ability cultivation in presence at a sicked business by performance management estimation of device through measurement. Also Learn a technology that measure exact tube voltage, exposure time, output dose. And it is to grasp photofluorography X-ray generator existing circumstances using at hospital. Material & Method : Investigated Photofluorography X-ray generator(inside, outside each 10) of 10 university hospitals using tube voltage, exposure time, output dose measuring instrument. Result : Photofluorography device that tube voltage correctness is incongruent by examination PAE decision came out 3, and at exposure time correctness examination 2 incongruent, Also 3 that calculate coefficient of variation about exposure in repeatability examination of exposure were incongruent. Inappropriate photofluorography device is 5 outside hospital(mobile unit) and the thing in hospital was 3 in 3 kind of efficiency test. It appeared high that photofluorography device outside hospital is more incongruent than thing in hospital. Conclusion : May ready situation that can offer patient medical service of good quality by radiation exposure reduction, image quality administration, retake decrease etc. by keeping performance of Photofluorography device. Therefore, is considered that need on-time efficiency test.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.17-28
• /
• 1989

Having studied the production of monoclonal antibodies for developing a diagnosis medicine which shall be detected by a high-sensitivity test by using Rhodotorula rubra as a fungi-host which had been extracted through biochemical tests and follow-up examinations on Yeast-like fungi obtained from pulmonary tissues of pulmonary tuberculosis patients who had been in Kong ju National Tuberculosis Hospital from Jun. to Dec. in 1987, I. have gained such results as follows: 1. The fusion rate was influenced by feeder cell layers, cell density and time required to the cell fusion with cells in myelona subculture. 2. The fusion rate did not show any significant difference when the cell was applyed with two molecular weights, i.e., 1500 and 4000, of polyethylene glycol. 3. Fused cells after the addition of HAT selection media were bright and round, whereas unfused myelona cells and spleen cells were shrunk and granulated. 4. The cell fusion rate turned out to be about $57.2\%$(150 wells / 264 wells). 5. $10\%$(15 wells / 150 wells) of the positive reaction was detected in monoclonal antibody screening. 6. The titer which had reacted positively to Rhodotorula rubra fungal-host was 800 times in density after the gradual dilution of the produced monoclonal antibodies with Indirect ELISA method. 7. The Strongest specific reaction came out after the peroxidase labelled anti-human Immunogobulin had been applyed to Rhodotorula rubra for activating its nature after making drift with Carbonate-bicarbonate buffer (pH 9.6) and drying completely.

• Toxicological Research
• /
• v.31 no.2
• /
• pp.97-104
• /
• 2015

The skin exposure to solar irradiation and photoreactive xenobiotics may produce abnormal skin reaction, phototoxicity. Phototoxicity is an acute light-induced response, which occurs when photoreacive chemicals are activated by solar lights and transformed into products cytotoxic against the skin cells. Multifarious symptoms of phototoxicity are identified, skin irritation, erythema, pruritis, and edema that are similar to those of the exaggerated sunburn. Diverse organic chemicals, especially drugs, are known to induce phototoxicity, which is probably from the common possession of UV-absorbing benzene or heterocyclic rings in their molecular structures. Both UVB (290~320 nm) and UVA (320~400 nm) are responsible for the manifestation of phototoxicity. Absorption of photons and absorbed energy (hv) by photoactive chemicals results in molecular changes or generates reactive oxygen species and depending on the way how endogenous molecules are affected by phototoxicants, mechanisms of phototoxcity is categorized into two modes of action: Direct when unstable species from excited state directly react with the endogenous molecules, and indirect when endogeneous molecules react with secondary photoproducts. In order to identify phototoxic potential of a chemical, various test methods have been introduced. Focus is given to animal alternative test methods, i.e., in vitro, and in chemico assays as well as in vivo. 3T3 neutral red uptake assay, erythrocyte photohemolysis test, and phototoxicity test using human 3-dimensional (3D) epidermis model are examples of in vitro assays. In chemico methods evaluate the generation of reactive oxygen species or DNA strand break activity employing plasmid for chemicals, or drugs with phototoxic potential.

• Korean Journal of Veterinary Research
• /
• v.40 no.1
• /
• pp.81-85
• /
• 2000

Coxiella burnetii (C burnetii) is the causative agent of Q fever in animal and human. The distribution of the disease has been documented around world. In this study we developed the competitive enzyme linked immunosorbent assay(cELISA) and compared it with indirect immunofluorescent assay(IFA). A monoclonal antibody(Mab) against C burnetii and a peroxidase-conjugated anti-mouse IgM were used as an indicator system competing against antibody in animal serum or as an indicater of the absence of antibody. Sera were considered antibody positive when the percentage inhibition index(PI index) is upper than 30. PI index is calculated as 100-[sample OD/Mab OD)${\times}100$]. Among 162 bovine serum samples, 23 samples were antibody positive both in cELISA and IFA. And 156 samples showed same results. From goat with experimentally induced infection with C burnetii the antibody was detected 20 days early in cELISA compared to IFA. On the basis of present findings, it was demonstrated that cELISA is a reliable diagnostic method for The detection of specific antibodies against C burnetii infection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.191-204
• /
• 2014

In recent years, multi-camera systems have been recognized as an affordable alternative for the collection of 3D spatial data from physical surfaces. The collected data can be applied for different mapping(e.g., mobile mapping and mapping inaccessible locations)or metrology applications (e.g., industrial, biomedical, and architectural). In order to fully exploit the potential accuracy of these systems and ensure successful manipulation of the involved cameras, a careful system calibration should be performed prior to the data collection procedure. The calibration of a multi-camera system is accomplished when the individual cameras are calibrated and the geometric relationships among the different system components are defined. In this paper, a new single-step approach is introduced for the calibration of a multi-camera system (i.e., individual camera calibration and estimation of the lever-arm and boresight angles among the system components). In this approach, one of the cameras is set as the reference camera and the system mounting parameters are defined relative to that reference camera. The proposed approach is easy to implement and computationally efficient. The major advantage of this method, when compared to available multi-camera system calibration approaches, is the flexibility of being applied for either directly or indirectly geo-referenced multi-camera systems. The feasibility of the proposed approach is verified through experimental results using real data collected by a newly-developed indirectly geo-referenced multi-camera system.