• 제목/요약/키워드: indirect flow

검색결과 241건 처리시간 0.023초

스포츠센터 지도자의 변혁적 리더십과 운동 몰입 및 재구매 의도의 관계 (The Relationship among Coaches' Transformational Leadership, Exercise Flow, and Repurchase Intention in Sports Centers)

  • 범철호;슈테판 신
    • 한국산학기술학회논문지
    • /
    • 제16권9호
    • /
    • pp.5850-5858
    • /
    • 2015
  • 본 연구는 변혁적 리더십이 회원의 운동 몰입과 재구매 의도에 미치는 영향을 분석하였다. 수집한 설문지 275부를 이용한 결과는 다음과 같이 도출되었다. 첫째, 카리스마, 개인적 배려 및 지적자극은 인지 몰입과 행위 몰입에 긍정적인 영향을 미치는 것으로 나타났다. 둘째, 개인적 배려만이 재구매 의도에 긍정적인 영향을 미치는 것으로 나타났다. 셋째, 인지 몰입은 재구매 의도에 긍정적인 영향을 미치는 것으로 나타났으나, 행위 몰입은 유의한 영향이 미치지 않는 것으로 나타났다. 마지막으로 지도자의 변혁적 리더십, 운동 몰입 및 재구매 의도 간의 간접효과는 없는 것으로 나타났다. 이러한 결과는 지도자에게 고객들의 운동 몰입을 높이기 위한 이해를 돕는데 가치가 있으며, 마케터에게는 조직의 목표를 달성하기 위해 전략적인 계획을 세우는 데 도움이 될 것이다.

흡입공기량 간접계측방식의 전자제어화 Motorcycle 엔진 출력 특성 (Output Characteristics Using Indirect Measurement of Air Flow in a Motorcycle Engine)

  • 정태균;채재우
    • 한국자동차공학회논문집
    • /
    • 제13권3호
    • /
    • pp.87-95
    • /
    • 2005
  • Most of the motorcycle engines have used carburetors in the fuel system, because of its simple structure and reliability but the fuel economy and the emissions of those engines are bad when we compared with automobile engines .To meet with the tighten emission regulations and the higher requirements for fuel economy, the application of the carburetor on the motorcycle engines would be limited. Therefore, it is important to develope a ECU control system for motorcycle engines. Since the fuel injection system is expensive, it is necessary to decrease the cost of ECU system for motorcycle engines, but the accuracy of the ECU control system should be increased as high as possible. In this paper, we studied about the AFS characteristics of motorcycle engine controled by indirect method.

Study on Wake Roll-Up Behavior Behind Wings In Close Proximity to the Ground

  • Han, Cheol-Heui;Cho, Jin-Soo
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제3권2호
    • /
    • pp.76-81
    • /
    • 2002
  • A numerical simulation of wake behavior behind three-dimensional wings in ground effect is done using an indirect boundary element method (Panel Method). An integral equation is obtained by applying Green's 2nd Identity on all surfaces of the flow domain. The AIC is constructed by imposing the no penetration condition on solid surfaces, and the Kutta at the wing's trailing edge. The ground effect is included using an image method. At each time step, a row of wake panels from wings' trailing edge are convected downstream following the force-free condition. The roll-up of wake vortices behind wings in close proximity is simulated.

불포화토의 투수계수 방정식의 적용성 평가 (Applicability Evaluation of the Characteristics Equation for a Coefficient of Permeability of Unsaturated Soils)

  • 류태진;송창섭;임성윤
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2005년도 학술발표논문집
    • /
    • pp.393-398
    • /
    • 2005
  • In order to treat flow problems for an unsaturated soils, it is required the mediation of the coefficient of permeability with variation of suction. The coefficient of permeability for soils can be determined by the direct or indirect methods. The direct methods of permeability can be performed either in the laboratory or in the field. The indirect methods can be predicted from the soil-water characteristics curve. Laboratory test methods to measure the coefficient of permeability can be categorized into two types, steady-state and unsteady-state. In this study, the coefficient of permeability for unsaturated soils was determined by the modified apparatus for steady state-method(Klute, 1972) and was predicted from the equations of Brooks and Corey(1964) and Van Genuchten(1980). Experimental results were compared with predicted coefficient of permeability and verified applicability of the two equations.

  • PDF

진공관형 집열기 히트파이프 접촉방식에 따른 집열성능 비교 (Comparison of Collecting Performance according to Contact Types of Heatpipe in Vacuum Tube Type Solar Collector)

  • 윤지훈;정인국;이중섭;정경택;서정세
    • 한국기계가공학회지
    • /
    • 제10권6호
    • /
    • pp.122-127
    • /
    • 2011
  • In this study, it was compared collecting performance according to contact types between heatpipe and manifold of vacuum tube type solar collector. Between two types, direct contact type is better in collecting performance. On the other hand, Indirect type have advantage in maintenance. In the result of numerical analysis, As the temperature of heatpipe and flow rate of working fluid increased, difference of outlet mean temperature of two types became large. Also, it could be confirmed, as contact resistance between heatpipe and copper tube in indirect type increased, the difference increased too. Useful data in selection and design in vacuum tube type solar collector were proposed by the results of numerical analysis.

몰입경험, 자기주도학습 준비도, 인터넷 중독이 웹기반 컴퓨터교육의 학업 성취도에 미치는 영향 (Effect of Flow Experience, Self-directed Learning Readiness and Internet Addiction on Academic Achievement in Web-based Computer Education)

  • 장필식
    • 디지털융복합연구
    • /
    • 제10권1호
    • /
    • pp.293-300
    • /
    • 2012
  • 본 연구에서는 몰입경험, 자기주도학습 준비도, 인터넷중독과 웹기반 컴퓨터 교육의 학업성취도 간의 인과관계를 분석하였으며, 이 인과관계 모형의 남녀 성별 차이를 조사하였다. 연구결과에 따르면, 자기주도학습 준비도는 몰입경험과 학업성취도에 양의 방향으로 직접적이며 유의한 영향을 미치는 것으로 나타났으며, 인터넷 중독에는 음의 방향으로 유의한 직접 영향을 미치는 것으로 나타났다. 여학생의 경우, 학업성취도는 몰입경험에 양의 방향으로 유의한 직접적 영향을 받으며, 자기주도학습 준비도에 의해 몰입경험을 매개로 유의한 직 간접적 영향을 받는 것으로 조사되었다. 하지만, 남학생은 여학생과는 달리, 몰입경험이 학업성취도에 미치는 직접영향과 자기주도학습이 학업성취도에 미치는 간접 영향은 통계적으로 유의하지 않은 것으로 나타났다.

The influence of internal ring beams on the internal pressure for large cooling towers with wind-thermal coupling effect

  • Ke, Shitang;Yu, Wei;Ge, Yaojun;Zhao, in;Cao, Shuyang
    • Wind and Structures
    • /
    • 제28권1호
    • /
    • pp.1-17
    • /
    • 2019
  • Internal ring beams are primary components of new ring-stiffened cooling towers. In this study, numerical simulation of the internal flow field of a cooling tower with three ring beams under wind-thermal coupling effect is performed. The studied cooling tower is a 220-m super-large hyperbolic indirect natural draft cooling tower that is under construction in China and will be the World's highest cooling tower, the influence of peripheral radiators in operating cooling tower is also considered. Based on the simulation, the three-dimensional effect and distribution pattern of the wind loads on inner surface of the cooling tower is summarized, the average wind pressure distributions on the inner surface before and after the addition of the ring beams are analyzed, and the influence pattern of ring beams on the internal pressure coefficient value is derived. The action mechanisms behind the air flows inside the tower are compared. In addition, the effects of internal ring beams on temperature field characteristics, turbulence kinetic energy distribution, and wind resistance are analyzed. Finally, the internal pressure coefficients are suggested for ring-stiffened cooling towers under wind-thermal coupling effect. The study shows that the influence of internal stiffening ring beams on the internal pressure and flow of cooling towers should not be ignored, and the wind-thermal coupling effect should also be considered in the numerical simulation of cooling tower flow fields. The primary conclusions presented in this paper offer references for determining the internal suction of such ring-stiffened cooling towers.

Genetic Studies of Oenothera odorata Populations in Korea Based on Isozyme Analysis

  • Huh, Hong-Wook
    • Journal of Plant Biology
    • /
    • 제39권3호
    • /
    • pp.223-229
    • /
    • 1996
  • The genetic variation in Korean evening primorse (Oeothera odorata L.) populations was examiend to estimate the level of allozyme variation within populatons using starch gel electrophoresis. 7 of 13 loci (Adh, Est-1, Est-2, Mdh-2, Pgd-2, Pgm-1, and Idh) revealed (Ps=43.2%) were polymorphic. The mean number of alleles per locus (A) and polymorphic locus (Ap) for populations were 1.64 and 2.46, respectively. The effective number of alleles (Aep) within populations relatively was low ranging from 1.08 to 1.22 with a mean of 1.14. Within populations, the mean number of allele per polymorphic loci (Ap) was 2.46, the mean number of alleles per locus (A) was 1.64, and the mean genetic diversity was 0.093. About 2.7% of the total allozyme diversity resided among populations (Mean GST=0.0274). FIS, a measure of the deviation from random mating within 13 populations, was relative low (mean FIS=0.03636). The indirect estimate of gene flow, based on the mean GST, was high (Nm=8.88). Estimates of gene flow were consistent with low levels of genetic differentiation among populations.

  • PDF

작업순서를 고려한 효율적인 제조셀 형성방법 (An Efficient Cell Formation Approach for a Cellular Manufacturing System Considering Operation Sequences)

  • 정병희;최동순
    • 산업공학
    • /
    • 제10권3호
    • /
    • pp.189-196
    • /
    • 1997
  • This paper presents a cell formation approach for a cellular manufacturing system to minimize the inter-cell moves considering operation sequences. Two new factors are introduced: (1)flow-similarity(FS) for integrating direct/indirect inter-machine flow and similarity (2)machine cell-part moves (CPM) for exactly computing inter-cell moves. FS is used for combining machines and CPM is used for assigning the parts to the preliminary machine cells. In addition, we develop an aggregated heuristic algorithm to form manufacturing machine cells and assign the parts to those cells based on these concepts. We use performance criterion called total inter-cell moves(TICM), which is the total material flow between internal cells and external cells. Results of computational tests on a number of randomly generated test problems show that the suggested heuristic is superior to existing methods.

  • PDF

경사계를 이용한 교대변위 계측에 관한 연구 (The Measurement of Lateral Displacement of Abutment Using a Inclinometer)

    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2000년도 춘계학술대회논문집
    • /
    • pp.82-90
    • /
    • 2000
  • The abutment of bridge on soft foundation makes lateral movement due to the settlement of back fill and lateral flow. To measure the displacement of such a abutment, there are a lot of indirect method for measurement such as survey of leveling or inclinometer gauge around the abutment. But all of them are not sufficient to confirm the ground behavior and measure the exact lateral behavior of structure. As making the structure and pile cooperatively by measuring the movement of lateral displacement, for measuring the abutment displacement precisely by using the incliinometer. In this work, we try to suggest efficient measuring method of abutment displacement and its application.

  • PDF