• Restorative Dentistry and Endodontics
• /
• v.46 no.3
• /
• pp.32.1-32.10
• /
• 2021

Objectives: This study aimed to evaluate the effect of the application method of universal adhesives on the shear bond strength (SBS) of repaired composites, applied with different thicknesses. Materials and Methods: The 84 specimens (Filtek Z350 XT) were prepared, stored in distilled water for a week and thermocycled (5,000 cycles, 5℃ to 55℃). They were roughened using 400-grit sandpapers and etched with phosphoric acid. Then, specimens were equally divided into 2 groups; Single Bond Universal (SU) and Prime&Bond Universal (PB). Each group was subdivided into 3 subgroups according to application methods (n = 14); UC: 1 coat + uncuring, 1C: 1 coat + curing, 3C: 3 coats + curing. After storage of the repaired composite for 24 hours, specimens were subjected to the SBS test and the data were statistically analyzed by 2-way analysis of variance and independent t-tests. Specimens were examined with a stereomicroscope to analyze fracture mode and a scanning electron microscope to observe the interface. Results: Adhesive material was a significant factor (p = 0.001). Bond strengths with SU were higher than PB. The highest strength was obtained from the 1C group with SU. Bonding in multiple layers increased adhesive thicknesses, but there was no significant difference in SBS values (p = 0.255). Failure mode was predominantly cohesive in old composites. Conclusions: The application of an adequate bonding system plays an important role in repairing composite resin. SU showed higher SBS than PB and the additional layers increased the adhesive thickness without affecting SBS.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.16-22
• /
• 2019

PURPOSE. The purpose of this study was to compare the translucency and color changes of ceramic laminate veneers of different composition following glazing process. MATERIALS AND METHODS. $10mm{\times}10mm$ square specimens of 0.6 mm and 1.0 mm thicknesses were fabricated with IPS e.max Press (EM) and IPS e.max ZirPress (ZP) (n=10 per group). The color coordinates (CIE $L^*$ $a^*$ $b^*$) of the specimens were recorded with a colorimeter before and after glazing. The color changes and translucency parameter (TP) were calculated. For the comparisons with the composition and thicknesses between the 'not glazed' and 'glazed' groups, statistical analyses were done through paired T-test, independent two-sample T-test, and multiple regression analysis using SPSS 18.0 (P<.05). RESULTS. The TP of 0.6 mm EM was higher than that of 0.6 mm ZP. Total color difference (${\Delta}E^*$) between bare and glazed specimens of 1.0 mm EM was greater than that of 1.0 mm ZP with statistical significance. Following glazing, specimens from all groups showed statistically significant amount of decrease in $L^*$ and $a^*$, and statistically significant increase in $b^*$. The result of multiple regression analysis of EM and ZP showed that ${\Delta}L^*$ improved ${\Delta}E^*$. CONCLUSION. Within the limitations of present study, we conclude that translucency and color of ceramic laminate veneers change significantly after glazing process, and the nature and amount of changes vary with different compositions.

• Clinical and Molecular Hepatology
• /
• v.24 no.4
• /
• pp.409-416
• /
• 2018

Background/Aims: Left ventricular diastolic dysfunction (LVDD) is an early manifestation of cardiac dysfunction in patients with liver cirrhosis (LC). However, the effect of LVDD on survival has not been clarified, especially in decompensated LC. Methods: We prospectively enrolled 70 patients with decompensated LC, including ascites or variceal bleeding, at Daejeon St. Mary's Hospital from April 2013 to April 2015. The cardiac function of these patients was evaluated using 2D echocardiography with tissue Doppler imaging. The diagnosis of LVDD was based on the American Society of Echocardiography guidelines. The primary endpoint was overall survival. Results: Forty-four patients (62.9%) had LVDD. During follow-up (22.3 months), 18 patients died (16 with LVDD and 2 without LVDD). The survival rate was significantly lower in patients with LVDD than in those without LVDD (31.1 months vs. 42.6 months, P=0.01). In a multivariate analysis, the Child-Pugh score and LVDD were independent predictors of survival. Moreover, patients with a ratio of early filling velocity to early diastolic mitral annular velocity (E/e') ${\geq}10$ (LVDD grade 2) had lower survival than patients with E/e' ratio < 10. Conclusions: The presence of LVDD is associated with poor survival in patients with decompensated LC. Therefore, it may be important to monitor and closely follow LVDD patients.

• Korean Journal of Radiology
• /
• v.22 no.3
• /
• pp.425-434
• /
• 2021

Objective: To investigate the potential value of ¹⁸F-fluorodeoxyglucose (FDG) PET/CT in predicting the survival of patients with primary tracheal malignant tumors. Materials and Methods: An analysis of FDG PET/CT findings in 37 primary tracheal malignant tumor patients with a median follow-up period of 43.2 months (range, 10.8-143.2 months) was performed. Cox proportional hazards regression analyses were used to assess the associations between quantitative ¹⁸F-FDG PET/CT parameters, other clinic-pathological factors, and overall survival (OS). A risk prognosis model was established according to the independent prognostic factors identified on multivariate analysis. A survival curve determined by the Kaplan-Meier method was used to assess whether the prognosis prediction model could effectively stratify patients with different risks factors. Results: The median survival time of the 37 patients with tracheal tumors was 38.0 months, with a 95% confidence interval of 10.8 to 65.2 months. The 3-year, 5-year and 10-year survival rate were 54.1%, 43.2%, and 16.2%, respectively. The metabolic tumor volume (MTV), total lesion glycolysis (TLG), maximum standardized uptake value, age, pathological type, extension categories, and lymph node stage were included in multivariate analyses. Multivariate analysis showed MTV (p = 0.011), TLG (p = 0.020), pathological type (p = 0.037), and extension categories (p = 0.038) were independent prognostic factors for OS. Additionally, assessment of the survival curve using the Kaplan-Meier method showed that our prognosis prediction model can effectively stratify patients with different risks factors (p < 0.001). Conclusion: This study shows that ¹⁸F-FDG PET/CT can predict the survival of patients with primary tracheal malignant tumors. Patients with an MTV > 5.19, a TLG > 16.94 on PET/CT scans, squamous cell carcinoma, and non-E1 were more likely to have a reduced OS.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2009

Purpose: The purpose is to evaluate the accuracy of correcting the targeting error through the Target Location System (TLS) for the location change error of the reference point which arises from the movement or motion of patient during the treatment using the CyberKnife. Materials and Methods: In this test, Gafchromic MD-55 film was inserted into the head and neck phantom to analyze the accuracy of the targeting, and then the 6 MV X-ray of CyberKnife (CyberKnife Robotic Radiosurgery System G4, Accuray, US) was irradiated. End to End (E2E) program was used to analyze the accuracy of targeting, which is provided by Accuray Corporation. To compute the error of the targeting, the test was carried out with the films that were irradiated 12 times by maintaining the distance within the rage of $0{\pm}0.2\;mm$ toward x, y, z from the reference point and maintaining the angle within the rage of $0{\pm}0.2^{\circ}$ toward roll, pitch, yaw, and then with the films which were irradiated 6 times by applying intentional movement. And the correlation in the average value of the reference film and the test film were analyzed through independent samples t-test. In addition, the consistency of dose distribution through gamma-index method (dose difference: 3%) was quantified, compared, and analyzed by varying the distance to agreement (DTA) to 1 mm, 1.5 mm, 2 mm, respectively. Results: E2E test result indicated that the average error of the reference film was 0.405 mm and the standard deviation was 0.069 mm. The average error of the test film was 0.413 mm with the standard deviation of 0.121 mm. The result of independent sampling t-test for both averages showed that the significant probability was P=0.836 (confidence level: 95%). Besides, by comparing the consistency of dose distribution of DTA through 1 mm, 1.5 mm, 2 mm, it was found that the average dose distribution of axial film was 95.04%, 97.56%, 98.13%, respectively in 3,314 locations of the reference film, consistent with the average dose distribution of sagittal film that was 95.47%, 97.68%, 98.47%, respectively. By comparing with the test film, it was found that the average dose distribution of axial film was 96.38%, 97.57%, 98.04%, respectively, at 3,323 locations, consistent with the average dose distribution of sagittal film which was 95.50%, 97.87%, 98.36%, respectively. Conclusion: Robotic CyberKnife traces and complements in real time the error in the location change of the reference point caused by the motion or movement of patient during the treatment and provides the accuracy with the consistency of over 95% dose distribution and the targeting error below 1 mm.

• Nutrition Research and Practice
• /
• v.14 no.4
• /
• pp.322-333
• /
• 2020

BACKGROUND/OBJECTIVES: Arterial stiffness and endothelial dysfunction are 2 of the independent predictors for cardiovascular disease, while Acanthopanax senticosus Harms (ASH) is a traditional medicinal plant that can improve cardiovascular health. This study aimed to investigate the efficacy of the fruit of ASH on vascular function in apparently healthy subjects. SUBJECTS/METHODS: A 12-week, randomized, double-blind, placebo-controlled design, consisting of healthy adults with at least 2 of the following 3 conditions: borderline high blood pressure (BP; 120 mmHg ≤ systolic BP ≤ 160 mmHg or 80 mmHg ≤ diastolic BP ≤ 100 mmHg), smoking (≥10 cigarettes/day), and borderline blood lipid levels (220 ≤ total cholesterol ≤ 240, 130 ≤ low density lipoprotein cholesterol ≤ 165, or 150 ≤ triglyceride ≤ 220 mg/dL). Randomly assigned 76 subjects who received a placebo or 2 doses of ASH fruit (low, 500 mg/day; high, 1,000 mg/day) completed the intervention. Brachial-ankle pulse wave velocity (baPWV), flow-mediated dilation, carotid intima-media thickness, and BP were measured both at baseline and following the 12-week intervention. Endothelial nitric oxide synthase (eNOS) phosphorylation was assessed by western blotting. RESULTS: Compared with the placebo group, the low-dose group showed more significant changes after the 12-week intervention period in terms of systolic BP (0.1 vs. -7.7 mmHg; P = 0.044), baPWV (31.3 vs. -98.7 cm/s; P = 0.007), and the ratio of phospho-eNOS/eNOS (0.8 vs. 1.22; P = 0.037). CONCLUSIONS: These results suggest that ASH fruit extract at 500 mg/day has the potential to improve BP and arterial stiffness via endothelial eNOS activation in healthy adults with smoking and the tendency of having elevated BP or blood lipid parameters.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.587-592
• /
• 2009

Heat transfer model and energy dissipation rate were investigated to examine the heat transfer mechanism in bubble columns with continuous operation. The energy dissipation rate($E_D$) obtained from the unsteady state heat transfer model based on the surface renewal theory was significantly small, comparing with the hydrodynamic energy dissipation rate($P_v$) calculated from the overall hydrodynamic energy balance based on the behaviors and holdups of gas and liquid phases in the column. It was found from these results that the energy dissipation rate based on the surface renewal theory is independent of the hydrodynamic energy dissipation rate obtained from the overall hydrodynamic energy balance in the bubble column, in considering their mechanism. The different two energy dissipation rates were correlated in terms of operating variables within this experimental conditions, respectively.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.95-104
• /
• 2012

Purpose: The purpose of this study was to determine whether increasing the Ti6Al4V surface oxide negative charge through heat ($600^{\circ}C$) or radiofrequency plasma glow discharge (RFGD) pretreatment, with or without a subsequent coating with fibronectin, stimulated osteoblast gene marker expression in the MC3T3 osteoprogenitor cell line. Methods: Quantitative real-time polymerase chain reaction was used to measure changes over time in the mRNA levels for osteoblast gene markers, including alkaline phosphatase, bone sialoprotein, collagen type I (${\alpha}1$), osteocalcin, osteopontin and parathyroid hormone-related peptide (PTH-rP), and the osteoblast precursor genes Runx2 and osterix. Results: Osteoprogenitors began to differentiate earlier on disks that were pretreated with heat or RFGD. The pretreatments increased gene marker expression in the absence of a fibronectin coating. However, pretreatments increased osteoblast gene expression for fibronectin-coated disks more than uncoated disks, suggesting a surface oxide-mediated specific enhancement of fibronectin's bioactivity. Heat pretreatment had greater effects on the mRNA expression of genes for PTH-rP, alkaline phosphatase and osteocalcin while RFGD pretreatment had greater effects on osteopontin and bone sialoprotein gene expression. Conclusions: The results suggest that heat and RFGD pretreatments of the Ti6Al4V surface oxide stimulated osteoblast differentiation through an enhancement of (a) coated fibronectin's bioactivity and (b) the bioactivities of other serum or matrix proteins. The quantitative differences in the effects of the two pretreatments on osteoblast gene marker expression may have arisen from the unique physico-chemical characteristics of each resultant oxide surface. Therefore, engineering the Ti6Al4V surface oxide to become more negatively charged can be used to accelerate osteoblast differentiation through fibronectin-dependent and independent mechanisms.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1915-1919
• /
• 2010

Second-order rate constants $(k_N)$ have been measured for reactions of 2,4-dinitrophenyl phenyl carbonate (2) with a series of pyridines in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$ and compared with the $k_N$ values reported for the corresponding reactions of 2,4-dinitrophenyl benzoate (1) to investigate the effect of nonleaving group on reactivity and mechanism. The reactions of 2 result in larger $k_N$ values than those of 1. The Br${\o}$nsted-type plot for the reactions of 2 exhibits a downward curvature (i.e., ${\beta}2$ = 0.84 and ${\beta}1$ = 0.16), which is typical for reactions reported to proceed through a stepwise mechanism with a change in rate-determining step. The $pK_a$ at the center of the Br${\o}$nsted curvature, defined as $pK_a{^{\circ}}$, has been found to be 8.5 and 9.5 for the reactions of 2 and 1, respectively. Dissection of $k_N$ into the microscopic rate constants (e.g., $k_1$ and $k_2/k_{-1}$ ratio) has revealed that the reactions of 2 result in larger k1 values than those of 1, indicating that PhO behaves as a stronger electron-withdrawing group than Ph. However, the $k_2/k_{-1}$ ratio has been found to be independent of the electronic nature of Ph and PhO.

• YAKHAK HOEJI
• /
• v.37 no.6
• /
• pp.605-614
• /
• 1993

To investigate the endothelial dependence of angiotensin II(A II)-induced responses in the systemic and pulmonary arterial system of acute renal hypertensive rats of 2-kidney, 1-ligation type (RHRs), A II-induced vasocontractile and pressor effects were evaluated in isolated arteries and in vivo, respectively. A II dose-dependently contracted intact thoracic aorta and pulmonary artery (E$_{max}$:40% at 10$^{-7}$M and 80% at 3$\times$10 $^{-8}$M, respectively) from normotensive rats(NRs), which was significantly increased by removal of endothelial cells or pretreatment with EDRF inhibitors. In NRs, A II increased mean systemic and pulmonary arterial pressure(33 and 5.6mmHg at 0.1 $\mu\textrm{g}$/kg, respectively), the effect being significantly increased (P<0.01) by L-NAME(30mg/kg, i.v.). However, A II-induced contraction of intact thoracic aorta and pulmonary artery(E$_{max}$: 33% at 10$^{-7}$M and 93% at 3$\times$10$^{-8}$M, respectively) from RHRs were not changed after endothelial function was disrupted as above; similarly, pressor effects of A II on the systemic and pulmonary arterial pressure in RHRs did not altered by L-NAME. A II tachyphylactic responses for intact thoracic aorta from NRs and RHRs(65 and 87% at 10$^{-8}$M, respectively) were greater than those for pulmonary artery(19 and 19% at 10$^{-8}$M, respectively). Distruption of endothelial function significantly (P<0.01) depressed A II tachyphylaxis for thoracic aorta, but not for pulmonary artery. These results suggest that vascular reactivity to A II is not altered in RHRs, and it is greater for pulmonary arterial system than for systemic arterial system. A II reactivity is EDRF-dependent in both arterial systems of NRs, but EDRF-independent for RHRs. Finally, EDRF is one of the major factors underlying A II tachyphylaxis for thoracic aorta, but not for pulmonary artery.